SPART WL7106 User manual

PLATE RACK WL7106

www.zunfit.com
SAFETY PRECAUTION
Safety First
Regardless of how enthusiastic you may be about getting on your equipment and
exercising, take the time to ensure that your safety is not jeopardized. A moment’s lack
of attention can result in an accident, as can failure to observe certain simple safety
precautions.
1. Assemble the equipment according to the assembly instructions and only use the
individual parts enclosed for assembly of the equipment and which are listed in the
parts list as being specifically for this equipment. Before you start assembly, check
against the delivery to make sure that everything has been delivered and check
against the packing list to make sure all parts have been enclose.
2. Read, study and understand the Owner’s Manual and all the warning labels on this
product. Furthermore, it is recommended to familiarize yourself and others with
the proper operation and workout recommendations for this product prior to use.
Some of this information can be obtained in this owner’s Manual, as-well-as from
your local retailer.
3. It is imperative that you retain this Owner’s Manual and be sure all warning labels
are legible and intact. Replacements Owner’s Manual and labels are available from
your local retailer.
4. It is recommended that another person assist you with the assembly this unit.
5. Consult with your physician before beginning any exercise program. It is
recommended that you undergo a complete physical examination.
6. Use proper discretion when children are present.
7. Frayed or worn cables can be dangerous and may cause injury. Periodically check
these cables for any indication of wear.
8. Keep hands, limbs, loose clothing and long hair well out of the way of moving parts.
9. Do not attempt to lift more weight than you can control safely.
10. Work within you recommended exercise level. DO NOT work to exhaustion. If you
feel any pain or discomfort, stop your workout immediately.
11. Inspect the machine for any sign of wear on parts, hardware becoming loose or
cracks on welds. If a problem is found do not use or allow the machine to be used
until the defective part is repaired or replaced.
12. DO NOT place any sharp objects around the machine.

www.zunfit.com
EXPLODED DRAWING
1
2
2
3
3
4
4
44
4
5
6
7
7
7
4
7
7
6
6
8
8
9
10
15
11 15
15
12
10
13
14
14
12
NUMBER DESCRIPTION QUANTITY NUMBER DESCRIPTION QUANTITY
1 MAIN BASE 1 9 CROSS HEAD BOLT
M10*16 4
2 SIDE BASE 2 10 BOLT M10*25 9
3 MAIN FRAME 4 11 BOLT M10*95 2
4 PLATE BAR 9 12 WASHER 10 21
5 ROUND PLATE 1 13 BIG WASHER 10 8
6 END CAP 4 14 LOCK NUT M10 10
7 ROUND END CAP 9 15 BOLT M10*90 8
8 RUBBER DONUT 9

www.zunfit.com
ITALY OFFICE
Zun Srl
via Mammarella snc
66100 Chieti Scalo (CH),Italy
Email: info@zunfit.com
Phone: [phone]
CHINA OFFICE
Zunone
83# South Tongfu Road,
Nantong Jiangsu China
Email: [email protected]
Phone: [phone]