Special Tomato 61000000 User manual

EN2
EN
5
CHAIR ASSEMBLY
ages 3 years and up
CONVERSION TO
CHAIR + Early Pelvic
Positioner+ TRAY
under 3 years of age
© Bergeron Companies www.specialtomato.com
Revision 0313
UMHR03-13LIT
AGES 3 YEARS AND UP
AUTHORISED EUROPEAN
REPRESENTATIVE
GLOBAL CAREHAB
ROSENVANGS ALLE 32
8260 VIBY J
DENMARK
[phone]

Insert a Wood Nut (a), as shown into the inner holes of the Back.
Attach the Back as shown and insert a Long Screw (d). Loosely
tighten the Long Screw into Wood Nut through the Left Side
with the Allen Key.
Parts
Left Side
Right Side Foot Rest (8 pcs.) (4 pcs.) (4 pcs.) (8 pcs.)
ab
c d
e
(6 pcs.) Right + Left CapSeat
2 Back Supports Front Support 2 Metal Cross Bars Allen KeyBack
• SHORTER THAN
BACK SUPPORTS
• Always secure child in the restraint
• Never leave child unattended
• Always keep child in view
• Secure straps tightly
• Never use as a stepping stool
• The front edge of the footrest should never
extend beyond the bottom edge of the front
supports at floor level
• Always use chair on a smooth level surface
WARNING:
!
WARNING: The Height Right Chair is a
youth chair and is designed for use by children 3 years
of age and up.
!
3
a. b.
a
e
d
Insert a Wooden Dowel (e) into the larger hole in each of the Back Supports
and Front Support. Insert a Wood Nut (a), as shown into the inner holes of
the 3 Supports. Attach the 3 Wooden Supports as shown and insert Long
Screws (d). Loosely tighten the Long Screws into Wood Nuts through the
Left Side with the Allen Key. Labeling on the Rear Supports should be visible.
Attach the 2 Metal Cross Bars
as shown and insert Screws(c).
Loosely tighten the Screws(c)
into the Metal Cross Bars through
Both sides with the Allen Key.
Insert the rest of the Dowels, Wood
Nuts, and Screws as needed to
attach the Right Side of the chair.
FRONT
SUPPORT IS
SHORTER
HARDWARE a (3pcs.)
d (3pcs.)
e (3pcs.)
HARDWARE
a (4pcs.)
d (4pcs.)
e (3pcs.)
HARDWARE
c (4pcs.)
HARDWARE a (1pcs.)
d (1pcs.)
ad
d
dd
c
c
d
c
c
Logos this side
12
2
!
WARNING: Prevent serious injury or death
from falls or sliding out.
!
WARNING: The Height Right Chair can be converted to a High Chair with the use of the Early Pelvic
Positioner in conjunction with the Tray. The Early Pelvic Positioner is ALWAYS required when using the Tray for children
under 3 years of age. (Early Pelvic Positioner and Tray can be Purchased Separately)
Height Right™ Chair
DO NOT FULLY TIGHTEN SCREWS.

Seat and Foot Adjustment
Slide in the Seat and Foot Plate with the curved
edge facing forward. Make sure that the Seat
and Foot Rest are at the appropriate height for
the occupant. See the Seat and Foot Adjustment
section for proper placement of the Seat and
Foot Rest.
4
• Place child in seat. Crotch strap comes up between child’s legs.
Both Lap Straps come around child from the back and
“CLICK” into Crotch Strap. Adjust length of Lap straps to
secure child in seat.
• Press center button on Crotch Strap buckle to release child
from belt.
3 Point Belt Operation
Lap Strap “CLICK”
Crotch
Strap
5TIGHTEN ALL SCREWS (BOTH SIDES) IN
ORDER 1-5 _DO NOT OVER TIGHTEN!
• IF TOP METAL CROSS BAR
IS NOT NECESSARY-
END WITH # 4
Top Metal
Cross Bar
Bottom
Metal
Cross Bar
Front
Support
Back Rest
Back Leg
Supports
5
4
3
2
1
Height Right Chair
Color: Natural
Model #
61000000
Product Care
Clean chair with damp cloth; then wipe
dry. With normal use, over time screws
may loosen. Please maintain tight screws.
Use chair on smooth level surface.
Notice
Use only Height Right Chair accessories and parts. Height Right Chair parts are not interchangeable with other manufacturers’ products.
Replace any worn parts immediately for safety. © 2013 Bergeron By Design.
Customer Service
Toll Free: 1.866.529.8407
International: 1.315.429.8407
Fax: [phone]
5 Year Limited Warranty
Bergeron by Design warrants to the original retail purchaser of the Height Right
Chair product, that if any part or component proves defective in material or
workmanship within five years of the purchase date, the defective part will be
repaired or replaced (at Bergeron by Design’s discretion) free of charge. Warranty
service may be performed by an authorized service center or at Bergeron by
Design’s discretion.
This warranty does not cover normal wear and tear, or damage caused by accident
or misuse.
To exercise this limited warranty, the user should first obtain a Return Authorization
Number from Bergeron By Design. The product must be delivered charges pre-paid
(UPS recommended) to the factory or to an authorized service center, together with
a copy of the original invoice, the Return Authorization Number and a written
description of the problem.
6
Attach Black Caps with 2 small Screws
(b). as shown above. Repeat for Left.
Height
The seat is placed at optimal height when
the child’s elbows are level with the top
of the table.
The foot plate is placed at optimal height
when the child’s foot can rest flat
on it’s surface.
Depth
For optimal depth of the seat, position
child’s back against backrest with seat
supporting 3/4 of thigh.
For safety, the footrest should not exceed
the front legs of the chair.
Teen / Adult Use
Remove Seat Plate & Top metal cross bar.
Use the Foot Rest as the Seat Plate for a
larger seating surface.
Caps
TIGHTEN ALL SCREWS.
HARDWARE
b (4pcs.)
* As the child grows,
the TOP metal cross
bar CAN be removed.
Bergeron By Design • 15 South Second St. Dolgeville, NY 13329 • 1.866.529.8407
3

AGES 3 YEARS AND UP
FOR CHILDREN UNDER 3 YEARS OF AGE. ABLE TO SIT INDEPENDENTLY
CONVERSION TO
EN
5
EN
6
PARTS
CHAIR + Early Pelvic
Positioner+ TRAY
+ Early Pelvic Positioner +Tray
chair
Revision 0313

• Always secure child in the restraint
• Never leave child unattended
• Always keep child in view
• Secure straps tightly
• Never use as a stepping stool
• The front edge of the footrest should never
extend beyond the bottom edge of the front
supports at floor level
• Always use chair on smooth level surface
WARNING:
!
Height Right™ Chair
+ Early Pelvic Positioner +Tray
WARNING:
!
!
WARNING : The child should be secured in the chair at all times by the restraining system.
The tray is not designed to hold the child in the chair. It is recommended that the chair be used only by children
capable of sitting upright unassisted. The
Early Pelvic Positioner is ALWAYS required when using the Tray for
children under 3 years of age.
!
WARNING: Prevent serious injury or death
from falls or sliding out.
For children under 3 years of age able
to sit independently. NEVER Use the Tray without the use of
the
Early Pelvic Positioner ( Early Pelvic Positioner and Tray
sold separately)
5
Height Right™ Chair
+ Early Pelvic Positioner +Tray
OPTIONAL Early Pelvic Positioner
• 2 long straps (pre installed)
• 1 short strap
Parts
Right + Left Tray Clips
* OPTIONAL TRAY WITH COVER
HEIGHT RIGHT CHAIR
2

4
1
3
56
7
2“Click”
Loosen Screws
4
Fasten Clips
Center Early Pelvic Positioner on Seat Plate.
Place seat plate flat on table.
Peel off paper to
expose adhesive.
8Lower front edge back onto seat plate. Adhesive patches
will contact wooden seat plate. Do not reposition the
cushion for 24 hours to allow adhesive to bond.
Install Small loop strap by sliding long straps
through the Smaller loop strap openings.
CHAIR CONVERSION
Height Right™ Chair
+ Early Pelvic Positioner +Tray
Front lip of Insert
will overhang and mate to
front edge of seat plate.
Thread restraint straps
up through Early Pelvic
Positioner
Using Allen
key,
Remove
top metal
cross bar
6
Remove seat plate
Keeping the Early Pelvic Positioner
centered on the seat plate,
lift front edge of insert.
R
E
F
E
R
E
N
C
E
P
A
G
E
3
F
O
R
C
H
I
L
D
R
E
S
T
R
A
I
N
T
O
P
E
R
A
T
I
O
N
Early Pelvic Positioner +Tray Installation
3

Bergeron By Design • 15 South Second St. Dolgeville, NY 13329 • 1.866.529.8407
Product Care
Clean chair with damp cloth. With normal
use, over time screws may loosen. Please
check regularly. Only use chair on smooth
level surface.
Notice
Use only Height Right Chair accessories and parts. Height Right Chair parts are not interchangeable with other manufacturers’ products.
Replace any worn parts immediately for safety. © 2013 Bergeron By Design.
Customer Service
Toll Free: 1.866.529.8407
International: 1.315.429.8407
Fax: [phone]
5 Year Limited Warranty
Bergeron by Design warrants to the original retail purchaser of the Height Right
Chair product, that if any part or component proves defective in material or
workmanship within five years of the purchase date, the defective part will be
repaired or replaced (at Bergeron by Design’s discretion) free of charge. Warranty
service may be performed by an authorized service center or at Bergeron by
Design’s discretion.
This warranty does not cover normal wear and tear, or damage caused by accident
or misuse.
To exercise this limited warranty, the user should first obtain a Return Authorization
Number from Bergeron By Design.
The product must be delivered charges pre-paid (UPS recommended) to the
factory or to an authorized service center, together with a copy of the original
invoice, the Return Authorization Number and a written description of the problem.
14
12
9
Attach the Right Tray Clip as shown
with 2 Supplied Screws. Repeat
for Left.
TIGHTEN ALL SCREWS (BOTH SIDES) IN
ORDER 1-5 _DO NOT OVER TIGHTEN!
Top Metal
Cross Bar
Bottom
Metal
Cross Bar
Front
Support
Back Rest
Back Leg
Supports
5
4
3
21
From the rear of the chair : Slide seat plate and Early Pelvic Positioner in
1ST rung above top metal cross bar until Early Pelvic Positioner
mates with backrest.
Install Tray Clips 13 Installing Tray and using Clips
10 Thread top metal cross bar through
hanging loops under Early Pelvic
Positioner seat.
11 Reinstall top metal cross bar using original
screws.
Wood back & Insert “mate”
7
b
aWhen Tray is properly installed an
audible “click” will be heard from primary lock.
Engage the second safety Latch Lever by
pushing it forward into the primary spring lock.
“CLICK”
Second
Safety Latch
Engaged.
Primary
Spring Lock
13b
13a
FRONT
Top Metal
Cross Bar
4