
2
INSERT SIM CARD(S) AND MEMORY CARD
1. Remove the battery cover; push the four side locks
down to the unlocked position, and push the two top
slides down.
2. Remove the battery; push the battery lock left to the
unlocked position, then lift the battery out left-side
rst.
3. Insert one or two NanoSIM cards as required, metal
contacts down. Take note of the direction of the
notched corner.
4. If required, insert a MicroSD memory card, metal
contacts down, in the slot above the SIM card slots.
5. Replace the battery and push the battery lock right to
the locked position.
6. Replace the battery cover and lock it into place.
CHARGE THE BATTERY
Fully charge the battery for at least 4 hours before rst use. Use the supplied USB
cable and AC power adapter, connected to main power.
CCAUTION – Read the full user guide including all safety warnings before
operating this product.