Speechi ST-SUP-MOB-ELE-002 User manual

Installation manual
ST-SUP-MOB-ELE-002
10/05/2023 –ST-SUP-MOB-ELE-002-MAN-EN

Installer:
Before starting the installation, read the safety instructions, the mounting regulations and
rest of this product manual carefully. Failure to read, thoroughly understand, and follow all
instructions can result in serious personal injury and damage to equipment!
User:
Please carefully read the below safety information and user manual (if included) before using
the height adjustable mount or stand. This ensures a failure-free working stand and avoids
accidents.
Electrical Safety:
• Connect the stand to a properly grounded outlet only. Make sure the stand can be
immediately separated from the power outlet.
• Only use the stand in dry rooms, protect it from water and other liquids. Only wipe
the stand with dry cloth.
• Do not open lift unit. RISK OF ELECTRIC SHOCK. There are no serviceable parts
inside.
• In case of dysfunction, unplug the stand from power outlet and call an authorised
technical service person.
• Do not overrun power cord or damage it in any other way. Replace damaged power
cords immediately with new identical ones.
• Where a plug on the power supply cord is used as the disconnect device, the
socket-outlet shall be easily accessible.
• Disconnect main plug before moving the product.
• The stand is not dripping or splash water protected. Do not place objects filled with
liquids on or spray the stand.
• To reduce the risk of electric shock: Always unplug the stand from the electrical
outlet before cleaning.
Safety information
• For using this product properly and safely, please follow the contents of the Installation and
Operation Manual to install.
• It is suggested that this Electric Stand applies to the 55-86 inch intelligent panel. Use with
other equipment may result in instability causing injury.
• This stand can carry a maximum weight of 100KG.
1

Mechanical Safety:
• Always keep product's motion path free from obstacles.
• Before moving the stand up or down, assure at least a safety distance of 20 cm/ 7.9 inch from
any part of the stand to any other fitment in order to avoid shear traps or squeezing points.
• In case of accident, please release operating panel. Movement of the stand will stop
immediately.
• Only operate the stand on wheels on plane and stable floors. Move the stand on plane floors
only. Risk of tilting when overrunning floor unevennesses, door sills and etc.
• Severe risk of injury when the stand tips over.
• Always move your stand with the screen in the lowest position. Do not push the Electric Stand
from the front or back of lift.
• Do not move the Electric Stand by pushing on display.
• The bottom of the monitor or TV’ s panel height is not over 0.85m from the ground after
installed. Keep fingers and other body parts away from hazardous moving parts.
• Exceeding the weight capacity can result in serious personal injury or damage to equipment! It
is the installer's responsibility to make sure the combined weight of all accessories and
equipment attached to the product up to (and including) the display does not exceed the
maximum load of 220 lbs / 100 kg.
• Use with heavier screens may result in instability causing tip over resulting in death or serious
injury! The height adjustable feature of this stand will not function properly if the weight
exceeds the given maximum load.
• The installation, maintenance and removal of the equipment should be carried by trained
professional and skilled personnel.
The intended use of the product:
• The product is intended to be used for the mounting and height adjustment of passive or
interactive flat screen display panels.
• The product is intended for in-door use in classrooms, offices or meeting rooms, at
temperatures ranging between 0 to 40 °C. Please make sure indoor environment is dry and
cool. Normal operating humidity is 10%~90%RH.
• Do not use this product outdoors. The product is intended for use by adults; children under the
age of 16 should only use the product under adult supervision.
2

Parts
NOTE :
9
2
1
8
7
M8*25
17pcs
a
6mm 1pcs b
Ø
20*Ø
12.5
5pcs c
M4*8
7pcs
d
KM10*
25
5pcs e
Bolts
M5*16
5pcs
3pcs
f
g
10 11
12 13
ab c d e fg
6
5
4
3
3

Assembly Steps
a
2
3
Lock the wheels
c
b
Make sure the screws are locked.
Self-Provided
1
4

Assembly Steps
d
5
4
Make sure the screws are locked.
b
f
e
6
5

Assembly Steps
Make sure the screws are locked.
b
a
7
The specific installation holes can be adjusted
according to the actual needs, refer to the
installation height of the intelligent panel.
b
a
8
Make sure the screws are locked.
6

Assembly Steps
g
11
10
7

Assembly Steps
12
13
Done, enjoy !
8

Control Mode
Control Panel
No.
Items
Function description
1
UP
Control the rise of the Electric Stand
2
Down
Control the fall of the Electric Stand
3
USB Interface
Connect
the USB cable with a compatible
display
4
Control Pad Interface
Connect with the
Control Pad
5
Indicator Light
Standby: red;Work: blue
Control Pad
1. Connect the Control Pad to the interface on the lift column control panel.
4
3
2
1
5
9

Control Mode
2. There are two buttons on the Control Pad, corresponding to the UP Key
and DOWN key of the Control Panel.
10