Champ 1410 User manual

Auto Body Toolmart
Champ Frame Straightening Equipment, Inc.
2545 Millenium Dr. ~ Elgin, IL. 60124 [phone]
www.autobodytoolmart.com
ABottom Base Shelf
B4 - Wheel w/Bolts
C2 - Upright Support
D2 - Shelf
E2 - Crossbeam Support
F4 - Parts Hook
Parts List
1410 - Champ 3 Shelf
Parts Rack
Read all assembly instructions completely before attempting to assemble unit.
Improper assembly could result in damage to Parts Rack or injury to user. Parts
Rack is designed to hold various automotive parts.The Parts Rack should be inspected regularly for
damage. Do not use if any cracks in metal or welds are present.
WARNING
A
D
E
F
Frame Straightening Equipment Inc.
Made In USA
B
C

Place the Bottom Base Shelf (A) upside
down on floor and install the 4 Wheels (B)
into the caster holders on the base shelf.
Insert the 2 Upright Supports (C) into each
side of the Bottom Base Shelf (A).
Note: Do not tighten the bolts on Base Shelf (A),
leave loose. Allows for easy installation of shelves
in steps 3 and 4.
Place first Shelf (D) on the bottom set of
crossbeams on Upright Support (C).
Place second Shelf (D) on the top set of
crossbeams on Upright Support (C).
Insert the Upright Support (C) into the
bottom of the first Crossbeam Support (E).
1. 2.
3. 4.
5. 6.
Insert the Upright Support (C) into the
bottom of the second Crossbeam Support
(E).

Use a 1/2” socket (not included) to tighten
the 4 bolts on the Bottom Base Shelf (A),
to lock in and stabilize the Upright
Supports (C).
Place Parts Hooks (F) on the Crossbeam
Supports (E) to suit your needs.
7.
Assembled 3 Shelf Parts Rack
8.
Auto Body Toolmart
Champ Frame Straightening Equipment, Inc.
2545 Millenium Dr. ~ Elgin, IL. 60124 [phone]
www.autobodytoolmart.com