Speedtech 63-67 C2 Corvette User manual

Instructional Guide
Battery Mount
63-67 C2 Corvette
68-82 C3 Corvette

Battery Mount Page 2
Figure 1 C2 Corvette, features our ExtReme IRS Chassis, and Body Mount Kit
Congratulations on the purchase of your new Speedtech Performance Corvette Battery
Mount. Use only approved and appropriately rated jack and jack stands, be sure to take
all safety precautions required to do the job safely and correctly. If you are unsure, seek
the assistance of a highly qualified workshop to assist you.
Read and understand all instructions thoroughly before you begin. For the most part,
assembly and set up of your new Corvette Battery Mount can be done in a home garage
with hand tools and basic equipment.
We enjoy seeing the progress our customers are making as they work through their builds
so join the Team Speedtech group on Facebook and share your pictures and your story.
From everyone at Speedtech Performance we send you all best wishes for your project!

Battery Mount Page 3
Installation Guide
TABLE OF CONTENTS
1. GENERAL INFORMATION
1.1 THIS GUIDE
1.2 OVERVIEW
1.3 TOOLS
2. CHECK IN PARTS AND HARDWARE
2.1 CHECKING IN THE ORDER
2.2 CHECK IN TABLES
3. GETTING STARTED/INSTALLATION
3.1 LEVELING AND SUPPORT
3.2BODY PREPERATION
3.2INSTALLATION
4. FINISHING
4.1 TORQUE
4.2 FIBERGLASS
5. CONGRATULATIONS

Battery Mount Page 4
1.0 GENERAL INFORMATION
Back to Table to Contents
1.1 This Guide
Thank you for purchasing your new Speedtech Performance Corvette Battery Mount. These instructions
outline the Corvette Battery Mount that will be installed with the Speedtech Performance ExtReme chassis
only.
The vehicle should be on a level surface before you start.
NOTE: You can mount the battery box to either the driver or passenger side, therefore, all
plates are fully mirrored.
NOTE: This is designed to be a removable piece, do not weld the whole structure to the
chassis.
1.2 Tools
Installation of the Speedtech Performance Corvette Battery Mount can be done on the floor with
simple hand tools.
Additional things to have before you start:
•Wrench
•Welder
•Grinder
2.0 CHECK IN PARTS AND HARDWARE
Back to Table to Contents
2.1 Checking in the Order
Best practice will be to check in your order as soon as possible after receiving the order. To check
in the order we have provided tables, these can be used as check lists for your order.
2.2 Check in Tables
X
#
Description
Size
1
850501-0001
1
850501-0002
1
850501-0003
1
850501-0004
1
850501-0005
Note: There may be some extra hardware that was packaged that is not accounted for in the
check list. The hardware kits are made to fit multiple products and the excess is from that
process.

Battery Mount Page 5
3.0 GETTING STARTED / INSTALLATION
Back to Table to Contents
3.1 BOLTING TO CHASSIS
- Place plate -0005 on tope of
the frame rail, use provided
bolts to secure through
slotted holes
- Place plate -0004 on the
side of the frame rail, us
provided bolts to secure
through slotted holes
3.2 REAR PLATE
- Place plate -0003 at the
rear of the fixture and
tack weld into place
3.3FRONT PLATE
- Place plate -0002 at the front
of the fixture and tack weld
into place

Battery Mount Page 6
3.4TOP PLATE
- Place plate -0002 on the top of
the fixture and tack weld into
place, ensure this is level.
4.0 FINISHING
Back to Table to Contents
4.1 WELDING
Once all pieces are tack welded into place, it is time to do the final welds.
NOTE: This is designed to be a removable piece, do not weld the whole structure to the
chassis.
NOTE: When finished welding, you may want to grind down any welds on the top plate to
ensure the battery has complete, secure contact with the plate.

Battery Mount Page 7
5.0 Congratulations
Back to Table to Contents
Congratulations on completing your project, we know you will get many years of enjoyment from
your project. Please join the group Team Speedtech on Facebook. Team Speedtech is a
community of like-minded individuals using Speedtech Performance products. The Group’s
members include customers, our dealers and factory employees - each with a passion for Pro
Touring muscle cars. You can ask questions and get advice from the group members as well
as share your experience. Within the group we enjoy seeing the videos and pictures during the
progress of your projects so post up. We also encourage you to share pictures and videos of
your finished projects out on the road, at the show & shine, on track or however you get
enjoyment from your ride, we want to see it!
Thank you for choosing Speedtech Performance! We know you have a choice, and we
appreciate that you entrust us with your chassis and suspension needs for you custom muscle
cars.
Speedtech Performance, LLC
4160 S. River Rd.
St George UT, 84770
[phone]