thomann SP-320 User manual

Thomann GmbH · Hans-Thomann-Straße 1 · 96138 Burgebrach · Germany · www.thomann.de
DocID: 399665_08.12.16
SP-320 Stand
Assembly instructions
For mounting the SP-320 stand, use the
supplied furniture locks M6 (A), cap screws (B),
plastic caps (C) and hand screws (D).
Use a soft padding to prevent damages to
the surfaces.
1. Place the furniture locks (A) into the provided
blind holes in the cross bar. Make sure that the
furniture locks are positioned so that the
connecting screws can be inserted and fastened.
2. Place the cap screws (B) into the provided blind
holes of the side panels.
Scope of delivery
A: 4 × furniture lock M6
B: 4 × cap screw M6×40
D: 4 × hand screws M5×25
C: 8 × plastic caps
Crossbar
Left and right side panel

Thomann GmbH · Hans-Thomann-Straße 1 · 96138 Burgebrach · Germany · www.thomann.de
DocID: 399665_08.12.16
SP-320 Stand
For the packaging, environmentally friendly materials
have been chosen that can be supplied to normal
recycling. Ensure that plastic bags, packaging, etc. are
properly disposed of. Do not just dispose of these
materials with your normal household waste, but
make sure that they are collected for recycling. Please
follow the notes and markings on the packaging.
Ensure that plastic bags, packaging, etc. are properly disposed
of and are not in the reach of babies and young children.
Choking hazard!
The plasticiser contained in the rubber feet of this product may
possibly react with the coating of your parquet, linoleum,
laminate or PVC oor and after some time cause permanent
dark stains. In case of doubt, do not put the rubber feet directly
on the oor, but use felt-pad oor protectors or a carpet.
Technical specifications
Dimensions (W × H × D):
1270 mm × 655 mm × 260 mm
Weight: approx. 8 kg
3. Fix the cross bar with the two side panels using two
cap screws respectively. Tipp: Use a second screw
driver to avoid that the furniture locks distort.
4. Cover the blind holes in the side panels with the
plastic caps provided.
5. Place the digital piano onto the angles of the
side panels. Level the windings at the bottom of
the piano with the bores in the angles.
6. Fasten the digital pianos with two hand screws (D)
to the angles of the side panels from below.
Nut
x
D