Speedy Dryer W1000 User manual

SpeedyDRYER A Division of PCM, Inc.l1 Line Street Nancoke PA 18634 l1-800-822-6628 lwww.speedydryer.com l [e-mail]
Wall Arm
FEATURES AND SPECIFICATIONS
Easilly converts any Stand Dryer into a wall mounted dryer.
Simple operaon with lile maintenance.
Solid steel frame with ABS cover plates.
Power Cord runs through the Wall Arm eliminang tangles.
Full Arm reach of 72”, with 48” of adjustable height
Can be purchased by itself to upgrade your dryer or can be purchased with a new dryer.
All metal frame construcon, Made in the USA.
PRICE: $450.00 MSRP
W1000 - Speedy Wall Arm with Aachments for V-1000X and CL-5000
W1200 - Speedy Wall Arm with Aachments for V-100X
W1500 - Speedy Wall Arm with Aachments for D-15
See The Wall Arm In Action With Our YouTube Video Here.

SpeedyDRYER l1 Line Street Nancoke PA 18634 l1-800-822-6628 lwww.speedydryer.com l [e-mail]
WALL ARM PRICE LIST 2022
MODEL DESCRIPTION WARRANTY MSRP
W-1000W Wall Arm, Single 2 years, parts and labor $ 450.00
CL-5000W The Ulmate Cyclone 5000 w/ Wall Arm Lifeme Warranty1 $ 1,279.00
V-1000 W Our Most Popular Dryer w/ Wall Arm 2 years, parts and labor $ 1,149.00
V-100W More Heat Than the V-1000X w/ Wall Arm 2 years, parts and labor $ 1,149.00
D-15W The Rocket, Small and Quiet 2 year, parts and labor $ 1,079.00
1. Lifetime warranty applies to original purchaser, requires factory service at least once every 24 months, and covers motor, heating element, and switch.
2. Excludes hoses and nozzles.
Pricing eecve 08/03/22 - subject to change

Speedy Dryer
1 Line Street, Nancoke PA 18634
www.speedydryer.com
OR CALL US AT 800-822-6628
W-1000
Wall Mount Arm
[e-mail]
INSTRUCTIONS AND WARRANTY
WARRANTY
THIS ACCESSORY CARRIES A 2 YEAR WARRANTY
This equipment carries a 2 year warranty which exclusively covers manufacturer’s de-
fect. Speedy Dryer is not responsible for damage from abuse, misuse or neglect. Upon
approval, the defecve part or enre unit will be returned for repair or replacement.
We bear no responsibility for any outside labor or other outside charges due to down-
me associated with replacement or repair of this equipment under this warranty.
Fig 1.

Congratulaons!
You have just purchased a genuine Speedy accessory for your Speedy
dryer. This wall mount has been designed specically for use with your
dryer. Please read this manual over before installing or using your new
Speedy Dryer Wall Mount.
WARNINGS AND IMPORTANT INFORMATION:
-IT IS RECOMMENDED TO HAVE MOUNTING COMPLETED OR INSPECTED BY
A PROFESSIONAL.
-CHOOSE A SOLID FRAMED WALL AND INSTALL ON A STUD OR MOUNT ON
A CROSS PIECE BETWEEN TWO STUDS.
-FOR BRICK AND CONCRETE WALLS USE WELL ANCHORED BOLTS.
-WALL AND MOUNTS SHOULD BE STRUCTURED TO HANDLE 350+ POUNDS.
-IT IS RECOMMENDED TO SHORTEN THE DRYER'S LINE CORD. THIS SHOULD
BE DONE BY A PROFESSIONAL ELECTRICIAN.
-KEEP ELECTRICAL OUTLETS IN MIND WHEN CHOOSING A LOCATION.
-WE DO NOT RECOMMEND USE OF AN EXTENSION CORD WITH THIS OR
ANY OTHER OF OUR PRODUCTS.
-DO NOT ADD ANY EXTRA WEIGHT TO ARM OR DRYER.
-BE CAREFUL OF COUNTERTOPS AND WALLS WHEN MOVING DRYER FROM
STORAGE TO ACTIVE POSITION AND BACK.
-DO NOT HOLD AN OPERATING DRYER BY THE MOTOR OR TUBE AS THESE
AREAS GET VERY HOT. USE THE BODY OF THE DRYER OR THE RUBBER
INSULATOR TO PIVOT THE DRYER.
-THE USE OF ATTACHMENTS NOT SOLD OR RECOMMENDED BY THE
MANUFACTURER MAY CAUSE HAZARDS.
-A SQUARE TOOL WAS INCLUDED WITH THIS WALL MOUNT. PLEASE KEEP
THIS TOOL IN A SAFE PLACE AS IT MAY BE NEEDED IN THE FUTURE FOR
ADJUSTMENTS.
-INSPECT WALL ARM BEFROE EACH USE FOR DAMAGE AND WEAR
- INSPECT KEY YEARLY FOR WEAR AND REPLACE EVERY 5 YEARS.
DRYER SAFETY REMINDERS:
-Read all instrucons before using appliance.
-To protect against electrical hazards, do not immerse in water or any other
liquid and do not use while bathing.
-Close supervision is necessary when any appliance is used near children.
-Unplug the appliance from the outlet when not in use and before cleaning.
-Always keep cord away from heated surfaces.
INSTALLATION OF DRYER ON MOUNT:
1) Mount arm to wall.
2) If not already o, remove stem and hardware from dryer. Install yoke
placing spacers as illustrated in Fig 1. on the back of this manual. Tighten
bolt.
3) Remove safety screw from stem on arm, pung screw aside. Slip collar
over mount insert on dryer.
4) Insert dryer into arm. Li up the collar, insert key into open slot unl
collar can go back down.
5) Reinsert safety screw into stem on arm.
6) Make sure dryer is set to o
7) Keeping arm and dryer supported, plug dryer into arm and arm into
outlet.
8) Run dryer, place hand in air ow close to the nozzle to test for possible
spin. If so, unplug, disassemble dryer from arm and ghten nut on dryer
mount. (Once ghtened, repeat steps 5-8 unl dryer does not spin on its
own.)
10) Using included square tool, ghten spring by turning counter-clockwise.
Tighten unl you can place the dryer in any posion and it remains there.
Extend and move dryer in all direcons to ensure proper installaon.
NOTE: Removing dryer once spring is ghtened will cause arm to spring up.
It is recomended to loosen spring before removing dryer. Alternavely you
may remove dryer while holding arm and slowly release to resng posion.
To reinstall have one person hold dryer and arm as a second person inserts
key.
FIXING MOVEMENT:
-If the arm goes down - ghten spring with square tool counter clockwise.
-If the dryer spins - remove dryer from arm and ghten nut on dryer mount.
(Be cauous of the arm springing up when removing dryer)
-If dryer pivots up or down on its own - ghten bolt assembly on yoke.
DRYER SAFETY REMINDERS (CONT’D):
-Do not leave appliance unaended when it is operang.
-Do not operate any appliance with a damaged cord or plug, or aer the
appliance malfuncons or has been dropped or damaged in any manner.
-Do not drop or insert any object into any opening or duct as this may cause
an electrical hazard.
-Do not block air openings.
-Do not direct air ow toward eyes or other heat sensive areas.