GW Instek GRA-417 User manual

Rack Adapter Panel
GRA-417
Assembly Manual
GW INSTEK PART NO. 82RA-41700MA1
This assembly manual contains proprietary information, which is protected by copyrights. All rights are
reserved. No part of this manual may be photocopied, reproduced or translated to another language
without prior written consent of Good Will company.
The information in this manual was correct at the time of printing. However, Good Will continues to
improve products and reserves the rights to change specification, equipment, and maintenance
procedures at any time without notice.
Good Will Instrument Co., Ltd.
No. 7-1, Jhongsing Rd., Tucheng Dist., New Taipei City 236, Taiwan.
ISO-9001 CERTIFIED MANUFACTURER

GRA-417 Assembly Manual
GRA-417
The GRA-417 rack mount is suited for the GCT-9040, GPT-9601, GPT-9602,
GPT-9603, GPT-9612, GPT-9801, GPT-9802, GPT-9803, GPT-9804, GPT-9901A,
GPT-9902A and GPT-9903A. The GRA-417 supports the EIA standards for use
with standard-sized rack units. The GRA-417 holds one GPT unit and fits in a
standard 19” 4U rack.
Rack Mount Adapter Component List and Assembly
Description
Please check to make sure all the components of the
GRA-417 rack mount kit are provided.
GRA-417
Assembly
Item
Part NO.
Description
QTY
1
62RA-417HP101
L type bracket
3
2
594B-W3012NS1
Screw BMS M3*12 ISO N
(WASHER P.S), ROHS
4
3
594B-04020NS1
SCREW BMS ,4*20 ,ISO ,N
6
4
62RA-417LO101
GRA-417 Bottom cover
1
5
62RA-417FP101
GRA-417 Front plate
1
6
62PA-340HD101
CA PA 3U Handle, ROHS
2
7
594B-04012NS1
SCREW BMS ,4*12 ,ISO ,N
7
Assembly
Initial setup
1. Remove the bottom two rear panel feet from the unit.

GRA-417 Assembly Manual
3
2. Remove a screw from each side panel (bottom front)
from the unit. 2 screws in total, one hidden from view in
the diagram below).
3. Attach the 4 L-type brackets using the 594B-W3012NS1
screws to the unit.
12
4. Attach the front plate and handles to the bottom cover
using the 594B-04012NS1 screws.
65
4
7

GRA-417 Assembly Manual
4
5. Attach the unit to the bottom plate with the L-brackets
and the 594B-04020NS1 screws. Make sure the front
panel butts up against the front plate of the rack.
3
Dimensions
177
451.6
482.6