Spinshot Home User manual
OWNER’S
MANUAL
Spinshot Home
SPINSHOT
REVOLUTION FOR TENNIS TRAINING
Free Warranty Extension or Tennis Balls Offer
Thank you for choosing Spinshot. We love hearing and seeing
our tennis ball machines in action so if you would like to share
with us your review or video we can offer a free warranty
extension or free bag of tennis balls.
Please email us for more information and terms and conditions:
Contents
Section 1: Before Using Your Spinshot Home
Section 2: Net Assembly
Section 3: Machine Assembly
Section 4: Operating Your Spinshot Home
Section 5: Warranty
1
2
7
8
10
Thank you for purchasing a SPINSHOT Home tennis ball machine. This
manual contains important information concerning the proper use and
care of your ball machine. Please read the owner’s manual completely
before operating your machine.
What Tennis Balls to Use
Any standard sized tennis balls can be used in the Spinshot Home. Using
tennis balls designed for children - Red Dot, Orange Dot or Green Dot, will
make it easier for children to hit the balls as they are softer and nicer to hit.
Important Warnings
Supervise children at all times when they are using the machine.
Do not reach or look into the ball exit hole without turning the power off.
Do not place foreign objects into the ball machine.
Overloading balls into the ball chute will make it difcult for the returning
balls to drop into the chute.
Do not use your machine outside while it is raining.
Do not use wet tennis balls.
Section 1: Before Using Your Spinshot Home
1
Section 2: Net Assembly
2
Frame & Net Assembly
ASSEMBLE THE FRAME
The frame sections are outlined below. Please follow the step by step
instructions for proper assembly of the frame.
1
2
5
4
3
x1 x2
x4
x2
x1
1
2
3
3
4
4
4
4
6x5
1. BUILD THE FRAME BASE
Join RED base sections 1 and 2 as pictured below.
Unfold the front and rear legs and allow the elasticated internal cord to pull
the sections together. Push the sections rmly together to secure them into
position.
To join the sections together, push the lock pin down, then push the
adjoining frame sections 1 and 2 together (gure 2), clicking them into
position to ensure the correct connection.
The velcro tabs indicate the front legs of the frame base.
3
1
2
Figure 2
2. ATTACH THE UPRIGHT SECTIONS
Attach the short black upright sections 4 to the frame base.
The hooks should be facing into the centre of the frame.
4
4
4
44
2. ATTACH THE NET & LONG UPRIGHT POLES
Assemble the long black upright poles 3
Unfold the long black upright poles and allow the elasticated internal cord
to pull the sections together. Push the sections rmly together so they lock
into position.
The Net
The net consists of three parts - the
front net, the rear net and the base
net. The front net is short, hangs
loose and is attached to the rear net
along the top and also at the bottom
corners. The rear net is longer and is
attached to the base net.
Attach the Net
Holding the net with the black tabs
facing the front of the frame, slide
one of the long upright poles through
the red sleeve and secure the corner
of the net to the hook at the top of
the pole (gure 3).
Insert the bottom end of the upright pole to the centre tting of the frame
base.
Repeat with the other pole and other side of the net.
5
Figure 3
3. ATTACH THE BASE NET
Attach the corners of the base net to
the short black uprights
numbered 4
Pull the corners of the base net over
the top hooks of the short black poles.
Ensure the hooks are attached to the
net where the reinforced red stitching
is used.
4. ATTACH THE SMALL NET
Attach the bottom corners of the small
front net to the two front pole hooks.
Secure the top corners of the small net
to the red sleeves using the adjustable
rope pulls .
Using the black ties, attach the bottom
edge of the net to the front edge of
the base net.
5
5
6
6
Section 3: Machine Assembly
Assemble the Machine
The machine comes in three parts:
• the base of the machine
• two curved chute sections
1. ATTACH THE CHUTE TO THE MACHINE
Click the bottom chute piece onto the machine and then click the top chute
piece into place.
2. POSITION THE MACHINE
Position the machine so the top of the chute sits directly under the
exit hole of the base net (gure 8).
Figure 8
7
Section 4: Operating Your Spinshot Home
Powering Your Machine
POWER OPTIONS FOR YOUR MACHINE
Your Spinshot Home can either be plugged into mains power (power cord
supplied) or tted with 4 x D sized batteries (not supplied).
POWER SWITCH
The red power switch is located on the right hand
side of the machine. The power switch starts and
stops the ball machine. Serving of balls will start as
soon as the machine is switched on.
Speed Selection
SPEED DIAL
The Spinshot Home has four speed settings.
Use the red speed dial to change the speed. This
will also adjust the height of the balls.
Speed 1 (position pictured) delivers the ball low
and close to the machine / net.
Speeds 2 - 4 throw the balls slightly longer and higher
to allow for different skills and the space available. The
more space you have the higher the speed you can use.
1
2
3
4
8
SPEED SETTINGS
The diagram below shows the approximate postion of the ball at speed
settings one to four - speed one bouncing the lowest and closest to the
machine / net, and speed four bouncing the ball furtherest and highest.
Adjust the speed setting to suit the player level and the space availble.
Positioning of Machine and Net
Space Requirements
Position the net where you have a minimum space approximately 3 meters
wide and 4 meters long.
Player position [ X ] should be far enough away from walls, furniture and
objects so when the player’s arm and racquet are out stretched they do not
touch anything.
4321
Net
4+ meters
3+ meters Machine
9
Warranty Period
The warranty service is free for materials and workmanship for a period of
two years from date of original purchase.
Scope of Warranty
This warranty covers all defects in material and workmanship. The following
are not covered by the warranty:
• Units damaged by accident, misuse, abuse, neglect
• Units modied by unauthorized personnel
• Units damaged during shipment
• Battery damage
Section 5: Warranty
10
The Spinshot Network
Spinshot is a global business bringing affordable and high quality tennis ball
machines to customers across the world. It is our goal to provide the best
equipment to players of all abilities. Improve your game at any time without
the limitation of training partners or coaches.
Spinshot aims to produce the highest quality tennis ball machines and uses
cutting edge technology to bring your game to the next level.
Our Global Network of Distributors
USA: www.spinshotsports.com
UK: www.spinshot.co.uk
Australia: www.spinshot-sports.com
Germany: www.tennisman.de
Netherlands: www.spinshot.nl
China: www.tennis-equipment.cn
New Zealand: www.spinshotsports.co.nz
v.2020-2
Table of contents
Other Spinshot Sport & Outdoor manuals
