Butterfly Ultimate User manual

Ultimate
Table Tennis Table
Assembly Instructions
Ulti ate
mU t mate
li

1. TABLE TOP SIZE 1525×1370× MM- 2 NOS.
2. END FRAME PIPE SIZE 1525×60×20MM- 2 NOS.
3. INNER FRAME PIPE SIZE 1475×60×20MM - 2 NOS.
4. SIDE FRAME PIPE SIZE 1315×60×20MM- 4 NOS.
5. LEGS (Z) SIZE 765×730×125×50MM - 4 NOS.
6. CENTRE PIPE TO ATTACH LEGS SIZE 1205×125×50MM - 2 NOS.
7. ANGLE TO ATTACH TABLE FRAME WITH LEGS (Z) SIZE 75×9MM - 8 NOS.
8. POST SET - 1 NOS.
9. STEEL NET - 1 NOS.
10. BRACKET TO ATTACH FRAME WITH TABLE TOP SIZE 75×30×20MM - 16 NOS.
11. BOLT TO ATTACH LEGS (Z) WITH CENTRE PIPE SIZE 75×9MM - 8 NOS.
18 12. BOLT TOATTACH SIDE FRAME WITH POST SIZE 38×6MM - 8NOS.
13. BOLT TOATTACH POST WITH NET SIZE 38MM- 4 NOS.
14. PLASTIC CAP FOR POST SIZE 25×38MM - 4 NOS.
15. OUTER CORNER SIZE 73MM - 4 NOS.
16. PLASTIC CAP FOR SIDE FRAME SIZE 60×20MM - 4 NOS.
17. ROD TO ATTACH LEGS WITH GROUND SIZE 9×200MM - 4 NOS.
18. SCREW SIZE 8×13MM - 228 NOS.
19. SCREW BLACK SIZE 6×13MM - 12 NOS.
20. WASHER SIZE 9MM - 4 NOS.
21. SPANNER SIZE 9×7.5MM - 2 NOS.
22. SPANNER SIZE 6×7.5MM - 2 NOS.
tUl imate m
Ulti ate
PARTS LIST
P3
P7
P10
P13
P15
P16
P18
P19
P5
P6
P11
P4
P12
P9
P8
P14
P1
P2
P17

P21 - SIZE 9/7.5MM QTY. 2 P22 - SIZE 6/7.5 QTY. 2P9 QTY. 1
ADULT ASSEMBLY REQUIRED
Please read the safety instructions at the bottom of page- 4
STEP - 1
P17
SIZE 9×200MM QTY. 4
P12
SIZE 6MM QTY. 8 P7, P11 SIZE 75×9MM QTY. 16 P13 SIZE38MM QTY. 4 P12 SIZE 38×6MM QTY. 8
P7, P11
SIZE 9MM QTY. 16
P 20
SIZE 9MM QTY. 4 P 8 QTY. 4 P 5
SIZE 765×730×125×50MM QTY. 4 P 6 SIZE 1205×125×50MM QTY. 2
Attach
pipe (P6)
with legs (P5) using
nut & bolt size
75×9mm & tighten
it with help of to
spanners (P21)
centre
STEP - 2
Repeat step 1 for second half
Attach table frame angle
(P7) with legs (Z) (P5)
using nut & bolt size 75×9mm
& tighten it with the help of
2 spanners (P21)
STEP - 3

SAFETY INSTRUCTIONS
Washer (P20)
between (P8) & (P9)
STEP - 5
Bring both the complete halves
together, attach post (P8) with
table frame (P4) at both sides
using nut & bolt size 38×6mm
(P12) & tighten it with the help
of two spanners (P22)
STEP - 4
Repeat step 3 for second half
STEP - 6
Place the net (P9) into
post (P8) using bolt
size 38mm (P13) &
tighten it with the
help of two
spanners (P22)
STEP - 7
Insert the rod (P17) through
legs-Z (P5) using a hammer.
Repeat this on all four legs
Children below 14 years should not assemble the table.
This table is suitable for indoor and outdoor use.
Always cover the table when not in use
YOUR TABLE IS NOW READY FOR PLAY