SPORT SPIN UP SPRINT RESISTER User manual

MAINTENACE AND USE INSTRUCTION
1. ATTENTION!!!
READ ALL THE INSTRUCTIONS AND PRECAUTIONS CONTAINED IN THIS MANUAL BEFORE USING
YOYOSPRINT. KEEP THE MANUAL FOR FUTURE REFERENCE.
2. QUESTIONS & ORDERS
For any question , please call us
at 00393408073086 from Monday to Friday 10 am to 1 pm
[e-mail]
3. LEGENDA
ADVICE PROHIBITION
DANGER
4. ACCESSORIES
1 SPEED SENSOR Speed Sensor.
2 FAST BELT Fast dressing belt.
3 ROPE ADDITIONAL LENGHT To personalize the
length
4 SPRINT RESISTER BLOCK
Per bloccare in sicurezza SPRINT RESISTER senza uso di punti di
ancoraggio esterni.
5 OVERSPEED –E Breakaway kit
to train with
6 BELT TO FIT This bet is reusable
to better fit you.
7 PERSONAL
Ask for what you need.
6. ADVERTANCES
1
USE SPRINT RESISTER ONLY AS SHOWN IN THIS DOCUMENT.
2
THE OWNER OF SPRINT RESISTER, OR HIS DELEGATE, HAVE THE DUTY TO INFORM USERS OF ALL
IS THE OWNER TO VERIFY THAT ALL USERS ARE INFORMED OF ALL THE PRECAUTIONS FOR USE AND ADOPT THEM.
3
SPRINT RESISTER IS THE SUBJECT OF SCIENTIFIC EXPERIMENTATION.
4
USE THE TOOL ONLY AND EXCLUSIVELY F
OR ITS INTENDED USE, FOLLOWING THE METHODS AND WARNINGS CONTAINED THEREIN.
5
NO LIABILITY IS DISCLAIMED IN THE EVENT OF PERSONAL INJURY OR DAMAGES CAUSED OR DUE TO THE USE OF THE SPRINT RESISTER.
6
DO NOT USE SPRINT RESISTER IN A PLAY, NON-
PROFESSIONAL CONTEXT
7
SPRINT RESISTER IS NOT A TOY.
8
SPRINT RESISTER IS NOT A MEDICAL DEVICE AND IS NOT SUITABLE FOR THERAPEUTIC USE;
9
SPRINT RESISTER COMPLIES WITH THE UNI EN 957
STANDARDS
10
CONSULT A DOCTOR BEFORE BEGINNING ANY EXERCISE PROGRAM. THE ATHLETE MUST HAVE A CERTIFICATE OF PHYSICAL FITNESS IN ACCORDANCE
REGULATIONS IN FORCE.
11
EXCESSIVE TRAINING CAN CAUSE SERIOUS INJURY OR EVEN DEATH. IF DURING THE USE OF SPRINT RESISTER YO
PHYSICAL DISEASES OF ANY KIND AND NATURE, IMMEDIATELY STOP THE PHYSICAL ACTIVITY AND CONSULT A DOCTOR;
12
WEAR APPROPRIATE CLOTHING AND SHOES DURING EXERCISES.
13
DO NOT CHANGE THE LEVELS WHILE THE ATHLETE IS MOVING.
14
DURING THE EXERCISE AROUND THE SPRINT RESISTER, ADEQUATE SPACE FREE FROM PEOPLE OR THINGS IS NECESSARY.
15
DO NOT USE ON WET, MUDDY OR SANDY GROUND.
16
DO NOT PLACE DANGEROUS OBJECTS ALONG THE ROUTE OR NEAR THE SPRINT RESISTER.
17
COMPLETELY UNWIND THE ROPE BEFORE
PERFORMING THE
18
NEVER USE SPRINT RESISTER BEFORE FIXING IT ACCORDING TO THIS DOCUMENT.
19
NEVER BLOCK THE MOVEMENT OF THE RESISTANT UNIT DURING OPERATION IN ANY WAY.
20
NEVER REACH THE END OF THE ROPE.
21
DO NOT GRAB, TOUCH OR OBSTACLE THE ROPE IN ANY WAY DURING THE EXERCISE. IF THE ROPE DOES NOT SLIDE FREELY DURING EXERCISE, ST
VERIFY THE CAUSE.
22
IT IS OBLIGATION OF THE OWNER AND / OR THE USER TO CHECK THAT ALL PARTS HAVE
23
PERIODICALLY CHECK THE INTEGRITY OF ALL PARTS OF THE SPRINT RESISTER AND PAY MAXIMUM ATTENTION TO THE MOVABLE PARTS OF THE TO
FOUND, REPLACE IT IMMEDIATELY. DO NOT USE SPRINT RESISTERS WITH DAMAGED OR
24
ANY ASSEMBLY AND DISASSEMBLY OPERATION MUST BE CARRIED OUT AS INDICATED IN THIS DOCUMENT.
25
DO NOT ALTER AND / OR TAMPER THE SPRINT RESISTER DO NOT USE ABRASIVE BRUSHES OR SPONGES OR AGGRESSIVE CHEMICALS ON THE SPRINT
CONTACT
THE MANUFACTURER TO MAKE CHANGES AND UPDATES.
26
DO NOT REPLACE THE SPRINT RESISTER COMPONENTS WITH OTHER NON
27
DO NOT GET ON AND / OR SIT ON THE SPRINT RESISTER.
28
THE MANUFACTURER RESERVES THE RIGHT TO MODIFY THE SPRINT RESISTER PRODUCT ACC
CHANGES TO THE PREVIOUS EXAMPLES.
7. UNPACKING AND MOVING
The packaging, where present, consists of a cardboard box closed with adhesive tape;
A.
Remove SPRINT RESISTER and its components from the
B.
Cut the adhesive tape, taking care not to puncture or scratch the objects inside the box and without turning it over.
For the disposal of the packaging elements, respect the local regulations for the recovery of recyclable materials; K
children.
8. USE
8.1 The athlete
The athlete must have a physical fitness certificate according to current regulations. Consult a physician before beginning a
sports shoes and clothing suitable for the exercises.
MAINTENACE AND USE INSTRUCTION
Distributed by : SPORT SPIN UP
Address via Trentacoste 32, 20134 Milano.
E
-
mail PEC: [e-mail]
READ ALL THE INSTRUCTIONS AND PRECAUTIONS CONTAINED IN THIS MANUAL BEFORE USING
at 00393408073086 from Monday to Friday 10 am to 1 pm
DANGER
ECOLOGIC
length
of the rope.
Per bloccare in sicurezza SPRINT RESISTER senza uso di punti di
5.
TECHNICAL DATA
to train with
over speed. WEIGHT
to better fit you.
DIMENSIONS
Ask for what you need.
USE SPRINT RESISTER ONLY AS SHOWN IN THIS DOCUMENT.
THE OWNER OF SPRINT RESISTER, OR HIS DELEGATE, HAVE THE DUTY TO INFORM USERS OF ALL
PRECAUTIONS FOR USE BEFORE THE BEGINNING OF THE EXERCISE; IT
IS THE OWNER TO VERIFY THAT ALL USERS ARE INFORMED OF ALL THE PRECAUTIONS FOR USE AND ADOPT THEM.
SPRINT RESISTER IS THE SUBJECT OF SCIENTIFIC EXPERIMENTATION.
OR ITS INTENDED USE, FOLLOWING THE METHODS AND WARNINGS CONTAINED THEREIN.
NO LIABILITY IS DISCLAIMED IN THE EVENT OF PERSONAL INJURY OR DAMAGES CAUSED OR DUE TO THE USE OF THE SPRINT RESISTER.
PROFESSIONAL CONTEXT
;
SPRINT RESISTER IS NOT A MEDICAL DEVICE AND IS NOT SUITABLE FOR THERAPEUTIC USE;
STANDARDS
WHERE APPLICABLE. SPRINT RESISTER IS TESTED IN COMPLIANCE WITH THE UNI EN 957
CONSULT A DOCTOR BEFORE BEGINNING ANY EXERCISE PROGRAM. THE ATHLETE MUST HAVE A CERTIFICATE OF PHYSICAL FITNESS IN ACCORDANCE
EXCESSIVE TRAINING CAN CAUSE SERIOUS INJURY OR EVEN DEATH. IF DURING THE USE OF SPRINT RESISTER YO
U FEEL OF WASTE, HEAD TURNS, Dizziness OR
PHYSICAL DISEASES OF ANY KIND AND NATURE, IMMEDIATELY STOP THE PHYSICAL ACTIVITY AND CONSULT A DOCTOR;
WEAR APPROPRIATE CLOTHING AND SHOES DURING EXERCISES.
DO NOT CHANGE THE LEVELS WHILE THE ATHLETE IS MOVING.
DURING THE EXERCISE AROUND THE SPRINT RESISTER, ADEQUATE SPACE FREE FROM PEOPLE OR THINGS IS NECESSARY.
DO NOT PLACE DANGEROUS OBJECTS ALONG THE ROUTE OR NEAR THE SPRINT RESISTER.
PERFORMING THE
EXERCISES;
NEVER LEAVE THE ROPE WRAPPED ON THE WINDER DURING THE EXERCISE.
NEVER USE SPRINT RESISTER BEFORE FIXING IT ACCORDING TO THIS DOCUMENT.
NEVER BLOCK THE MOVEMENT OF THE RESISTANT UNIT DURING OPERATION IN ANY WAY.
DO NOT GRAB, TOUCH OR OBSTACLE THE ROPE IN ANY WAY DURING THE EXERCISE. IF THE ROPE DOES NOT SLIDE FREELY DURING EXERCISE, ST
IT IS OBLIGATION OF THE OWNER AND / OR THE USER TO CHECK THAT ALL PARTS HAVE
BEEN TIGHTENED REGULARLY BEFORE EACH USE;
PERIODICALLY CHECK THE INTEGRITY OF ALL PARTS OF THE SPRINT RESISTER AND PAY MAXIMUM ATTENTION TO THE MOVABLE PARTS OF THE TO
FOUND, REPLACE IT IMMEDIATELY. DO NOT USE SPRINT RESISTERS WITH DAMAGED OR
NOT TIGHTENED PARTS;
ANY ASSEMBLY AND DISASSEMBLY OPERATION MUST BE CARRIED OUT AS INDICATED IN THIS DOCUMENT.
DO NOT ALTER AND / OR TAMPER THE SPRINT RESISTER DO NOT USE ABRASIVE BRUSHES OR SPONGES OR AGGRESSIVE CHEMICALS ON THE SPRINT
THE MANUFACTURER TO MAKE CHANGES AND UPDATES.
DO NOT REPLACE THE SPRINT RESISTER COMPONENTS WITH OTHER NON
-ORIGINAL COMPONENTS.
THE MANUFACTURER RESERVES THE RIGHT TO MODIFY THE SPRINT RESISTER PRODUCT ACC
ORDING TO ITS NEEDS, WITHOUT THE BURDEN TO MAKE THE SAME
The packaging, where present, consists of a cardboard box closed with adhesive tape;
Remove SPRINT RESISTER and its components from the
packaging carefully.
Cut the adhesive tape, taking care not to puncture or scratch the objects inside the box and without turning it over.
For the disposal of the packaging elements, respect the local regulations for the recovery of recyclable materials; K
eep all packaging elements out of the reach of
The athlete must have a physical fitness certificate according to current regulations. Consult a physician before beginning a
ny exercise program. The athlete must wear
1
Distributed by : SPORT SPIN UP
of
Katia Di Rocco, P.IVA 10513050962
Address via Trentacoste 32, 20134 Milano.
mail PEC: sportspi[email protected]t
.
TECHNICAL DATA
4,8 KG
32X12X12 CM
PRECAUTIONS FOR USE BEFORE THE BEGINNING OF THE EXERCISE; IT
OR ITS INTENDED USE, FOLLOWING THE METHODS AND WARNINGS CONTAINED THEREIN.
NO LIABILITY IS DISCLAIMED IN THE EVENT OF PERSONAL INJURY OR DAMAGES CAUSED OR DUE TO THE USE OF THE SPRINT RESISTER.
WHERE APPLICABLE. SPRINT RESISTER IS TESTED IN COMPLIANCE WITH THE UNI EN 957
STANDARDS.
CONSULT A DOCTOR BEFORE BEGINNING ANY EXERCISE PROGRAM. THE ATHLETE MUST HAVE A CERTIFICATE OF PHYSICAL FITNESS IN ACCORDANCE
WITH THE
U FEEL OF WASTE, HEAD TURNS, Dizziness OR
NEVER LEAVE THE ROPE WRAPPED ON THE WINDER DURING THE EXERCISE.
DO NOT GRAB, TOUCH OR OBSTACLE THE ROPE IN ANY WAY DURING THE EXERCISE. IF THE ROPE DOES NOT SLIDE FREELY DURING EXERCISE, ST
OP IMMEDIATELY AND
BEEN TIGHTENED REGULARLY BEFORE EACH USE;
PERIODICALLY CHECK THE INTEGRITY OF ALL PARTS OF THE SPRINT RESISTER AND PAY MAXIMUM ATTENTION TO THE MOVABLE PARTS OF THE TO
OL; IF WEAR IS
DO NOT ALTER AND / OR TAMPER THE SPRINT RESISTER DO NOT USE ABRASIVE BRUSHES OR SPONGES OR AGGRESSIVE CHEMICALS ON THE SPRINT
RESISTER.
ORDING TO ITS NEEDS, WITHOUT THE BURDEN TO MAKE THE SAME
eep all packaging elements out of the reach of
ny exercise program. The athlete must wear
1

8.2 Place of use
SPRINT RESISTER
can be used both outdoors and in an indoor space provided that the following conditions are met:
A. Free space at least 5 m longer than the rope
and at least 2 m wide. Flat or inclined surface.
B. Suitable natural or artificial lighting.
C.
Temperatures between + 5 ° C and + 35 ° C. Humidity between 20% and 90%.
SPRINT RESISTER
must not be used on slippery surfaces or / and unsuitable for its correct use
To avoid to draggle the rope DO NOT USE on
wet, muddy or sandy ground.
8.3 Fixing the SPRINT RESISTER
It is forbidden to use SPRINT RESISTER unless previously fixed.
Use the ratchet strap to lock SPRINT RESISTER (fig. 1):
 take the free end of the belt
 Pass the strap around the fixing point (fig.1 e.g.
a pole).

Insert the strap into the ratchet slot taking care to avoid twisting and bending of the ratchet.
 Operate the lever and forcefully tighten the belt.
 Fully close the ratchet.
Make sure the fixing point is tight.
Make sure the fastening strap does not show signs of wear.
It is forbidden to replace the fastening strap with non-
original ones.
The SPRINT RESISTER
fixing serves only to avoid overturning / twisting and / or dragging of
damage to the athlete and to the SPRINT RESISTER. During exercise, it is normal for the resistant unit to move up or down and
sideways around the rear eyebolt pivot, do not impede this movement in any way. Keep one mete
IL fissaggio
8.4 Wear SPRINT RESISTER
Fully unwind the rope after releasing the carabineer
from the cable reel. Do not use the rope while it is still wound on the reel.
It is advisable to lay the rope diagonally to the
sprint path so as not to cause stumbling.
Join the belt to the cord end of the SPRINT RESISTER rope with the
Before use, make sure that all parts are well hooked and the
The course must start from the point where the athlete,
wearing the belt, puts tension on the rope. In this way, the belt remains
in place, leaving the athlete's hands free.
During the exercise DO NOT grab, touch or obstruct the rope in any way.
If during the exercise the rope does not slide freely, stop immed
8.5 Sprint
To increase the load (0 -
30 kg) (2 knobs of 6 kg each, 2 knobs of 9 kg each), while exiting the
counterclockwise. The knob should come close to the screw head.
To decrease the load: turn one of the k
nobs clockwise until it stops.
During exercise, it is normal for the resistant unit to move up or down and sideways around the rear eyebolt pivot, do not
impede this movement in any way. During exercise, keep one meter from the resistant unit.
NEVER ARRIVE
AT THE END OF THE RACE. Getting to the end of the race can seriously damage the SPRINT RESISTER and cause
the athlete to fall due to the kickback.
It is advisable to move the end of the rope along once the sprint is finished by about 2 meters
tripping and crushing the rope.
8.7 End of session
At the end of the session, the athlete removes the belt and drops it.
If outdoors, unfasten the SPRINT RESISTER from the
fixing;
strap.
Rewind the rope on the special manual winder (Fig. 5). It is recommended to start wrapping the longest part of the rope close
to the machine. Anchor the carabineer
in the hole provided.
Store SPRINT RESISTER in a closed and dry place.
9. ROUTINE MAINTENANCE
9.1 External cleaning and verification
Dust the entire surface of the machine with a soft cloth.
It is also advisable to:
 Check that the rope is not dirty;

Check that the connection between the rope and the belt is

Check that the belt is intact and that there are no abrasions, or unstitching,

Check that the ratchet strap is intact and that there are no abrasions, or cracks,
In case of wear of the SPR
INT RESISTER components, contact us for replacement.
10. STORAGE
SPRINT RESISTER when not in use must be kept in a closed and dry place and stored in its bag by wrapping the
supplied.
Do not store SPRINT RESISTER in open space or in a
humid place.
11. TRANSPORT
SPRINT RESISTER can be easily carried by hand inside the supplied bag which also contains all the accessories.
12. DISPOSAL
YOYOSPRINT must not be disposed of as urban waste but must be disposed of separately (in the states of the Europe
collection centers set up for the disposal and recycling of these products.
We invite you to comply with local regulations for the disposal and protection of the environment and therefore to use, where
equipment based on the material of their components. The correct valorization of waste allows the protection of the environme
13. ACCESSORIES
The accessories indicated here may not be installed on your SPRINT
satisfy your requests in this regard.
13.1 SPEED SENSOR
See dedicated instructions SIGMA BC 7.16 / 9.16 ATS. Instructions from the manufacturer SIGMA are attached in case SPEED
case of use with DOUBLE SPEED the results will be distorted. (Fig. 6)
visualized mph.
13.2 ROPE EXTRA LENGHT
There are no significant variations
in the use of SPRINT RESISTER with a longer rope. If you need a longer rope please contact the
manufacturer for modification. Never replace the rope using non
customer assistance for the necessary information.
13.3 BELTS
There are 2 types of belts available (you can choose between the 2 alternatives or request 2 or more belts):

The adjustable belt (Fig. 7A) can be adjusted with the practical Velcro straps.

The Fast belt can speed up the change between one athlete and another (Fig. 7B).
OVERSPEED-E.
SPRINT RESISTER can be used with 2 belts with 2 belts. The additional belt is fixed to the free end of the rope and serves t
can be used both outdoors and in an indoor space provided that the following conditions are met:
and at least 2 m wide. Flat or inclined surface.
Temperatures between + 5 ° C and + 35 ° C. Humidity between 20% and 90%.
must not be used on slippery surfaces or / and unsuitable for its correct use
.
wet, muddy or sandy ground.
To use the dirty rope will cause serious damages.
It is forbidden to use SPRINT RESISTER unless previously fixed.
a pole).
Insert the strap into the ratchet slot taking care to avoid twisting and bending of the ratchet.
Make sure the fastening strap does not show signs of wear.
original ones.
fixing serves only to avoid overturning / twisting and / or dragging of
the resistant unit which could cause
damage to the athlete and to the SPRINT RESISTER. During exercise, it is normal for the resistant unit to move up or down and
sideways around the rear eyebolt pivot, do not impede this movement in any way. Keep one mete
r from the resistant unit.
from the cable reel. Do not use the rope while it is still wound on the reel.
sprint path so as not to cause stumbling.
Join the belt to the cord end of the SPRINT RESISTER rope with the
carabineer.
Before use, make sure that all parts are well hooked and the
carabineer closed.
wearing the belt, puts tension on the rope. In this way, the belt remains
During the exercise DO NOT grab, touch or obstruct the rope in any way.
If during the exercise the rope does not slide freely, stop immed
iately.
30 kg) (2 knobs of 6 kg each, 2 knobs of 9 kg each), while exiting the
rope;
turn one of the knobs (Fig. 4)
counterclockwise. The knob should come close to the screw head.
nobs clockwise until it stops.
During exercise, it is normal for the resistant unit to move up or down and sideways around the rear eyebolt pivot, do not
impede this movement in any way. During exercise, keep one meter from the resistant unit.
AT THE END OF THE RACE. Getting to the end of the race can seriously damage the SPRINT RESISTER and cause
It is advisable to move the end of the rope along once the sprint is finished by about 2 meters
laterally to form a V, to avoid
At the end of the session, the athlete removes the belt and drops it.
fixing;
operate the lever by fully opening the ratc
het and removing the
Rewind the rope on the special manual winder (Fig. 5). It is recommended to start wrapping the longest part of the rope close
in the hole provided.
Check that the connection between the rope and the belt is
intact and that there are no abrasions or that the knots are tight;
Check that the belt is intact and that there are no abrasions, or unstitching,
Check that the ratchet strap is intact and that there are no abrasions, or cracks,
INT RESISTER components, contact us for replacement.
SPRINT RESISTER when not in use must be kept in a closed and dry place and stored in its bag by wrapping the
rope
on the cable reel
humid place.
SPRINT RESISTER can be easily carried by hand inside the supplied bag which also contains all the accessories.
YOYOSPRINT must not be disposed of as urban waste but must be disposed of separately (in the states of the Europe
an Union) by transferring it to the appropriate
collection centers set up for the disposal and recycling of these products.
We invite you to comply with local regulations for the disposal and protection of the environment and therefore to use, where
equipment based on the material of their components. The correct valorization of waste allows the protection of the environme
The accessories indicated here may not be installed on your SPRINT
RESISTER, if you want to install them please contact us we will be happy to
See dedicated instructions SIGMA BC 7.16 / 9.16 ATS. Instructions from the manufacturer SIGMA are attached in case SPEED
SENSOR is supplied. In
case of use with DOUBLE SPEED the results will be distorted. (Fig. 6)
The speed sensor gives the velocity in Km/h nevertheless on the screen it is
in the use of SPRINT RESISTER with a longer rope. If you need a longer rope please contact the
manufacturer for modification. Never replace the rope using non
-
original components. If it is necessary to replace the rope, call
There are 2 types of belts available (you can choose between the 2 alternatives or request 2 or more belts):
The adjustable belt (Fig. 7A) can be adjusted with the practical Velcro straps.
The Fast belt can speed up the change between one athlete and another (Fig. 7B).
The FAST belt cannot be used with the
SPRINT RESISTER can be used with 2 belts with 2 belts. The additional belt is fixed to the free end of the rope and serves t
o speed
2
the resistant unit which could cause
damage to the athlete and to the SPRINT RESISTER. During exercise, it is normal for the resistant unit to move up or down and
from the cable reel. Do not use the rope while it is still wound on the reel.
wearing the belt, puts tension on the rope. In this way, the belt remains
turn one of the knobs (Fig. 4)
During exercise, it is normal for the resistant unit to move up or down and sideways around the rear eyebolt pivot, do not
AT THE END OF THE RACE. Getting to the end of the race can seriously damage the SPRINT RESISTER and cause
laterally to form a V, to avoid
het and removing the
Rewind the rope on the special manual winder (Fig. 5). It is recommended to start wrapping the longest part of the rope close
st
intact and that there are no abrasions or that the knots are tight;
on the cable reel
an Union) by transferring it to the appropriate
We invite you to comply with local regulations for the disposal and protection of the environment and therefore to use, where
possible, the separate collection of
equipment based on the material of their components. The correct valorization of waste allows the protection of the environme
nt and health.
RESISTER, if you want to install them please contact us we will be happy to
SENSOR is supplied. In
The speed sensor gives the velocity in Km/h nevertheless on the screen it is
in the use of SPRINT RESISTER with a longer rope. If you need a longer rope please contact the
original components. If it is necessary to replace the rope, call
The FAST belt cannot be used with the
o speed
3
to
p
4
5
2
B
A
7
6

3
up the change of rope ends with which to continue the exercise or to allow 2 athletes to work without having to exchange the belt after detaching it from the longer
rope at the end of the sprint.
13.4 OVERSPEED E: BREAKAWAY KIT
Do not use OVERSPEED E
on other equipment.
Bring the short end of the SPRINT RESISTER string close to OVERSPEED-E (Fig 8A). Hook the OVERSPEED-E eyebolt to the SPRINTRESISTER rope carabineer (Fig 8B).
Attach the OVERSPEED E carabineer to the ADJUSTABLE BELT (Fig 8C). Do not use different belts.
Put on the ADJUSTABLE BELT and run holding the lanyard (Fig 8D). NEVER ARRIVE AT THE END OF THE RACE. Getting to the end of the race can seriously damage the
SPRINT RESISTER and cause the athlete to fall due to the kickback.
When you reach the desired point, pull the cord of the OVERSPEED-E and let it fall while continuing to run. The athlete will feel a strong
acceleration.
13.5 BLOCK
The BLOCK accessory (Fig. 9) is used to safely lock SPRINT RESISTER without the use of external anchoring points. Place the BLOCK (Fig. 9)
in the desired area making sure it is suitable for the exercise (as previously described). Insert at least 60 kg of weight lifting discs on the
central screw. Use masses of up to 10 kg each. Health Indications: While lifting the masses bend your legs and not your back.
Fasten YOYOSPRINT to YOYO-BLOCK with the standard YOYOSPRINT fastening strap, inserting it into the eyebolt used as a fastening point,
14. WARRANTY
14.1 Warranty conditions
The absence of defects in the material, construction and assembly is guaranteed, as well as the compliance of the product with the level of
technique achieved at the design stage.
YOYOSPRINT benefits from a guarantee of conformity starting from the day of purchase and has duration of 12 months of legal guarantee
recognized by the Manufacturer pursuant to and for the purposes of art.133 of the consumer code (Legislative Decree 296/2005).
14.2 Warranty exclusion clauses
This warranty is void if the defect derives from:
 Failure to comply with the instructions for use and maintenance.
 Damages resulting from neglect and negligence of use.
 Transport damage.
 Damage from circumstances and / or events caused by force majeure which in any case cannot be attributed to production defects.
 The natural wear of the components.
The warranty lapses if YOYOSPRINT is manipulated or tampered with by third parties not authorized by the manufacturer or for reasons and in ways other than those
indicated in the use and maintenance manual.
14.3 How to use the guarantee
In the event of a warranty claim, contact the number indicated on the first page of this document in order to agree on the methods of intervention and verify the
applicability of the warranty terms.
The guarantee is effective if the lack of conformity found which is such as to make YOYOSPRINT unsuitable for its intended use and to appreciably decrease the value,
is reported within 8 days from the date of discovery, by registered letter or email PEC, addresses indicated in this document. The validity of the warranty is subject to
the fact that YOYOSPRINT has been used correctly (non-improper use) and the use and maintenance rules reported in this certificate have been observed, and in
particular what is recommended in this document.
SOMMARIO
1. ATTENTION!!! ................................................................................................................................................................................................................................................................................................. 1
2. QUESTIONS & ORDERS.............................................................................................................................................................................................................................................................................. 1
3. LEGENDA ........................................................................................................................................................................................................................................................................................................ 1
4. ACCESSORIES .............................................................................................................................................................................................................................................................................................. 1
5. TECHNICAL DATA ........................................................................................................................................................................................................................................................................................ 1
6. ADVERTANCES ............................................................................................................................................................................................................................................................................................. 1
7. UNPACKING AND MOVING ....................................................................................................................................................................................................................................................................... 1
8. USE ................................................................................................................................................................................................................................................................................................................... 1
8.1 The athlete ........................................................................................................................................................................................................................................................................................ 1
8.2 Place of use .................................................................................................................................................................................................................................................................................... 2
8.3 Fixing the SPRINT RESISTER .................................................................................................................................................................................................................................................... 2
9. ROUTINE MAINTENANCE ......................................................................................................................................................................................................................................................................... 2
10. STORAGE ....................................................................................................................................................................................................................................................................................................... 2
11. TRANSPORT .................................................................................................................................................................................................................................................................................................. 2
12. DISPOSAL ...................................................................................................................................................................................................................................................................................................... 2
13. ACCESSORIES ............................................................................................................................................................................................................................................................................................. 2
13.1 SPEED SENSOR ............................................................................................................................................................................................................................................................................. 2
13.2 ROPE EXTRA LENGHT ................................................................................................................................................................................................................................................................ 2
13.4 OVERSPEED E: BREAKAWAY KIT ........................................................................................................................................................................................................................................... 3
13.5 BLOCK ............................................................................................................................................................................................................................................................................................... 3
14. WARRANTY.................................................................................................................................................................................................................................................................................................... 3
14.1 Warranty conditions ..................................................................................................................................................................................................................................................................... 3
14.2 Warranty exclusion clauses ...................................................................................................................................................................................................................................................... 3
14.3 How to use the guarantee.......................................................................................................................................................................................................................................................... 3
8
A
8
B
8
C
8
D
8
E
9