Sports Ami Probo-t 1804 User manual

Sports Ami
User Manual
1804

Sports Ami
Table of Contents
a. About the Product
b. Technical Parameters
c. Standard Accessories
d. Installation Steps
e. Handling the Repairs Yourself
f. Troubleshooting
g. Best Practices

About the Product (1)
Oscillation Range
1
Sports Ami

About the Product (2)
Ser ice Simulation Normal Shots Simulation
1. Choose the correct Spin and Speed
2. Best suited for beginners who intend to
learn to return opponent’s service
1. Strong on Spin and Speed
2. Si ulate features for loop shots, s ashes
3. Suitable for daily practice
Loosen the knob when you need to change the
position/direction of the robot head
2
Sports Ami

About the Product (3)
Adjusting the Spin
9 kinds of Spin are possible. The robot head
could rotate 180 degrees.
1. A co bination of rotation of Top and
botto wheel could produce ultiple
Spin Types
a. Both the wheels could rotate to
positions 1, 2 & 3
b. Try different co binations for
different spin types
2. No Rotation is No-Spin
3
Sports Ami

Technical Para eters
Sl. # Parameter Value
1Gross Weight 4.5 Kgs
2Net Weight 3.5 Kgs
3Packing Di ensions 40c s X 38c s X 37c s
4Rated Voltage 100V – 240V
5Rated Power 36W
6Serving Frequency 40-70 Balls/Minute
7Serving Speed 4-40 eters/second
8Balls Holding Capacity 120 balls axi u
9Point Of Fall Rando
10 Body Color Black
11 Spin Variety Top Spin, Under Spin, Non Spin, Left Spin, Right Spin
4
Sports Ami

Measuring Tool
Main Engine
Fixing Stand
Power Adaptor
Screws and Fixed co er
StorageTub
Robot Head
Standard Accessories
5
Sports Ami

Installation Steps
a. Unpack and Verify the accessories
b. Connect the Robot Head to the Main
Engine
c. Connect the USB Line to the Main
Engine
6
Sports Ami

Installation Steps
d. Fix the Storage Tub to the Main Engine and
rotate to fix it
e. Take the Fixing Stand and install to the TT
Table as you would install the Net Stand on the
Table
f. Arrange the robot to the fixing Stand using
the groo es in the Fixing Stand
7
Sports Ami

Handling the Repairs Yourself
As it is, your favorite probo-t Table Tennis Robot, is si ple to handle and guess what, you could repair it yourself
as well, with si ple tools available at your ho e.
To avoid going through this little experience, please do take good care of your robot, just si ply operate it in clean environ ent, and regularly
wash the balls clean to avoid dust particles on the surface of the balls
In case you feel that the balls are not getting delivered as per design:
1. Please check if the driving wheel is da aged – if it is you ay need to change the driving wheel (Diagra A)
2. In case the ball delivery isn’t happening , you ight have to change the otor (Diagra B, Next Page)
(1) (2) (3) (4)
Diagram A – Replacing the Dri ing Wheels
Check which
driving wheel
looks da aged
Dis-asse ble 4
screws fro side-
board
Take out the
da aged wheel by
re oving the screw
fro the driving
wheel
Take the new
wheel and replace
it in the sa e
position as old
wheel. Assemble
It Back
8
Sports Ami

Handling the Repairs Yourself
Check which otor
is da aged. Then
re ove the related
wheel first
Take out the wheel
and then unscrew
the 2 screws as
shown in the picture
Then unscrew the
screws of the related
otor that needs
replace ent
Cut the wires as
shown in the
picture. Make a note
of the +ve and –ve
sides and wire colors
Take the new otor
of the sa e
capacity and
description and
connect wires as it
was with old otor
Use insulating tape
to prevent short
circuit.
Asse ble it back by
Following the steps
entioned earlier, in
reverse this ti e.
(1) (2) (3) (4)
Diagram B –
Replacing the Motor
(5) (6) (7)
9
Sports Ami

Troubleshooting
Obser ation Possible Cause Possible Resolution
No Reaction fro the Robot Power Failure Check power connection. Try alternate
power supply
Proble with ball delivery Ball grove could be dirty Clean the grove with dry cloth
re oving any dust particles that ay
be
Balls not of reco ended size Verify and replace balls if needed
Balls da aged Verify and Replace balls if needed
Abnor al Speed and Spin Motor could be da aged Verify and Replace otor
Power supply erratic Check Power Supply
Oscillation not working Oscillation otor could be da aged Verify and Replace oscillation otor
Speed changing box could be
da aged
Verify and Replace oscillation otor
Power Connection is not good Check Power Supply
Oscillation Range is li ited Adjusting rod ay not be aligned
properly
Readjust
Control Box is not responding Control Box could be da aged Verify and Replace control box
10
Sports Ami

Best Practices
Use ONLY standard 40 balls. Avoid using soft balls. Usage of soft balls could result
in balls getting stuck inside the robot
Balls should always be cleaned and dried. Avoid dust getting onto the balls as this ay
result in balls getting cla ped
The robot ust be used only under the guidance of adult or experienced supervisor
Keep the balls inside the Storage Tub even when not in use
If the robot is not in use for a long ti e, it is highly advised that it should be properly
bagged, to avoid dust. As a good practice, always cover the robot to avoid dust
Proper and ti ely cleaning of balls and the robot itself could lead to better results and
long life
1
2
3
4
5
6
11
Sports Ami

Sports Ami
www.sportsami.com
[phone]
[e-mail]