Sports Ami probo-t 1854 User manual

Sports Ami
User Manual
1854

Sports Ami
Table of Contents
a. Know Your Robot ……………..…………………………………………………………01
b. About the Product …………….………………………………………………………….02
c. Technical Parameters …………….………………………………………………………….07
d. Installation Steps …………….………………………………………………………….08
e. Troubleshooting …………….………………………………………………………….15
f. os And onts ……………..…………………………………………………………16

Know Your Robot
1
Sports Ami
Iron Support – Unfold, Expand and Cl p on the table
Ball Conveyor – Unscrew f the balls are stuck
Robot Head – Should be rotated for Enabl ng Sp n
Ball Collect on Tray
Net Curta ns – Should be n the front of the robot
S de Support –
Should be expanded
S de Support –
Should be expanded

About the Product (1)
Features
2
Sports Ami
1. Osc llat on – adjustable to part al or full table
2. Serv ng Opt ons – D rect and Ind rect
3. Mult ple Sp n Opt ons - Left and R ght S de, No Sp n, Topsp n,
BackSp n
4. Adjustable Angle for Ball throws
5. Serve unl m ted Balls – Capac ty l m ted to the capac ty of the
tray
6. Recycl ng Tray and attached Net w th S de Support
7. D g tal Control Box
8. Supports 40mm and 40+ Balls – preferred 3 Star TT Balls (Do Not
m x 40mm and 40+ Balls)

About the Product (2)
Oscillation Range
3
Sports Ami
Osc llat on could be ach eved by sett ng the “Adjust ng Levers” at the back of the Robot Head
View illustration and Instructions on the next page for details

About the Product (3)
Oscillation Range
4
Sports Ami
D fferent Pos t ons of the Adjust ng Lever w ll allow the
control on osc llat on.
3-4 : Full Table
3-5 : ¾ Left S de of the Table
2-4 : ¾ R ght S de of the Table
1-4 : R ght Half of the Table
3-6 : Left Half of the Table
2-5 : M ddle of the Table
1-5 : ¼ R ght M ddle of the Table
2-6 : ¼ Left M ddle of the Table
1-6 : F xed Po nt
Adjusting Levers
O NOT TRY TO A JUST THESE LEVERS WHEN THE ROBOT IS WORKING. STOP THE ROBOT FROM
THE STOP/PAUSE BUTTON ON THE CONTROL BOX AN THEN TRY THIS.
ANY ATTEMPT TO TRY THIS OTHERWISE, WOUL RESULT IN MALFUNCTIONING AN AMAGES
BEYON REPAIR

About the Product (4)
5
Sports Ami
Loosen the knob when you need to change the
ANGLE of the robot head
O NOT LOOSEN THE KNOB WHEN THE ROBOT IS
WORKING. STOP THE ROBOT FROM THE STOP/PAUSE
BUTTON ON THE CONTROL BOX AN THEN TRY THIS.
ANY ATTEMPT TO TRY THIS OTHERWISE WOUL RESULT
IN MALFUNCTIONING AN AMAGES BEYON REPAIR
Service Simulation Normal Shots Simulation
1. Choose the correct Sp n and Speed
2. Best su ted for beg nners who ntend to
learn to return opponent’s serv ce
1. Strong on Sp n and Speed
2. S mulate features for loop shots, smashes
3. Su table for da ly pract ce
Angle Adjustment

About the Product (5)
Adjusting the Spin
Mult ple Sp n comb nat ons are poss ble. The
robot head could rotate 180 degrees.
Position -1
a. Rotat on of Top Wheel s Top Sp n.
b. Rotat on of Bottom Wheel s Back Sp n.
c. Both wheels Rotat ng at same speed s no
sp n
Position -2
a. Rotat on of Top wheel s left Sp n.
b. Rotat on of Bottom Wheel s R ght Sp n
c. Both wheels Rotat ng at same speed s no
sp n
Position -3
a. Rotat on of Top wheel s R ght Sp n.
b. Rotat on of Bottom Wheel s Left Sp n
c. Both wheels Rotat ng at same speed s no
sp n
6
Sports Ami
32
1
Poss ble rotat ons
of robot head
Top Wheel
Bottom Wheel
O NOT TURN THE ROBOT HEA WHEN THE ROBOT IS
WORKING. STOP THE ROBOT FROM THE STOP/PAUSE BUTTON
ON THE CONTROL BOX AN THEN TRY THIS.
ANY ATTEMPT TO TRY THIS OTHERWISE WOUL RESULT IN
MALFUNCTIONING AN AMAGES BEYON REPAIR

Techn cal Parameters
Sl. # Parameter Value
1Gross We ght 11 Kgs
2Net We ght 8.5 Kgs
3Pack ng D mens ons 91cms X 37cms X 37cms
4Rated Voltage 100V – 240V
5Rated Power 50W
6Rated Frequency 50/60 Hz
7Serv ng Frequency 30-100 Balls/M nute
8Serv ng Speed 4-40 meters/second
9Po nt Of Fall Random
10 Body Color Black
7
Sports Ami

Installat on
8
Sports Ami
Step - 1
Unpack and Verify the accessories
a. Robot – 1 Un t
c D g tal Control Box (w red w th the Robot) – 1 Un t
b. Post Sets for S de Support Net F x ng – 2 Un ts
d. F x ng Stand for D g tal Control Box – 1 Un t

Installat on
9
Sports Ami
Step - 2
Open the Left and Right Tray in expanded Position. It should look like
the below, post this step

Installat on
10
Sports Ami
Step – 3
Fixing the Net
You would see 5 support rods beh nd the head of the Robot
a. The Center Rod s the longest and should not be touched. The 2 outer long ones
would be used to nsert nto the nets for Net Expans on.
b. The two shorter ones are f xed but should be moved s deways(as shown n the
llustrat ons ahead). These need to be jo ned to the separable curved rods later on.
c. Take Out the Left Most Rod. Fl p the second left Rod (shorter one) towards left
d. Insert the left most rod(wh ch you took out) nto the groove ava lable on the top-left
of the Net
e. Insert th s rod nto the fl pped Rod
Repeat the above steps (c, d, e) for the r ght s de.

Installat on
11
Sports Ami
Step – 3 contd..
Jo n the 2 support rods

Installat on
12
Sports Ami
Step - 4
Fixing the Robot onto the TT Table
Understanding the Mechanism
Expand the Curved Support Bars
Fix the Support Bars underneath the table for the grip

Installat on
13
Sports Ami
Step - 5
Fixing the Side Supports and Net
P ck up the 2 Post Sets and f x them up l ke you would normally do for
the Table Tenn s Net. These has small rods/p llars emerg ng out, wh ch
are used to f x the Net w th. Follow the Steps as llustrated below
a. Put on the Ball Catch Net b. Put on the Ball Catch Net

Installat on
14
Sports Ami
c. Fixing the gaps

Troubleshoot ng
Observation Possible Cause Possible Resolution
No React on from the Robot Power Fa lure Check power connect on. Try alternate
power supply
Problem w th ball del very Ball grove could be d rty Clean the grove w th dry cloth
remov ng any dust part cles that may
be
Balls not of recommended s ze Ver fy and replace balls f needed
Balls damaged Ver fy and Replace balls f needed
Abnormal Speed and Sp n Motor could be damaged Ver fy and Replace motor
Power supply errat c Check Power Supply
Osc llat on not work ng Osc llat on motor could be damaged Ver fy and Replace osc llat on motor
Speed chang ng box could be
damaged
Ver fy and Replace osc llat on motor
Power Connect on s not good Check Power Supply
Osc llat on Range s l m ted Adjust ng rod may not be al gned
properly
Readjust
Control Box s not respond ng Control Box could be damaged Ver fy and Replace control box
15
Sports Ami

Best Pract ces
Use ONLY 3 star 40 mm or 40+ balls. O NOT MIX 40mm and 40+ balls. Avo d us ng
soft balls. Usage of soft balls could result n balls gett ng stuck ns de the robot.
Balls should always be cleaned and dr ed. Avo d dust gett ng onto the balls as th s may
result n balls gett ng clamped
The robot must be used only under the gu dance of adult or exper enced superv sor
DO NOT make any adjustments to the angle, robot head for sp n or the osc llat ons,
when the robot s work ng. Always, stop the robot for mak ng such changes.
If the robot s not n use for a long t me, t s h ghly adv sed that t should be properly
bagged, to avo d dust. As a good pract ce, always cover the robot to avo d dust
Proper and t mely clean ng of balls and the robot tself could lead to better results and
long l fe
1
2
3
4
5
6
16
Sports Ami

Sports Ami
www.sportsami.com
[phone]
[e-mail]