SportsPlay 601-708 User manual

32 Gallon Steel Trash Can
For Part Numbers: 601
-
708 and
601-709
Component Details
Item No.
Part Number
Description
QTY
1
*613
-
901P
32 G.
Trash can half
Perforated
2
*613
-
901E
32 G.
Trash can half
Perforated
2
2
604
-
802
32 Gallon Bottom
1
3
126
-
702
3/8
x ¾” Button Head Bolt
6
4
126
-
703
3/8 x 1” Button Head Bolt
4
5
316
-
601
3/8
” Washer
20
6
226
-
602
3/8
” Lock Nut
10
7
416
-
505
7/32” Socket Key
1
Optional Accessorie
s
601
-
723
32 Gallon Liner
1
601
-
715
32 Gallon Dome Lid
1
601
-
719
32 Gallon Rain Bonnet
1
601
-
717
32 Gallon Ash Top
1
601
-
721
32 Gallon Steel Lid
1
Version: 6B/Back_08.v2
www.sportsplayinc.com
1
2
4
3
1
5
5
3
4
1
2
*Verify whether your trashcan is either perforated or
expanded for correct component Identification.

32 Gallon Steel Trash Can
For Part Numbers:
601
-
708 and
601-709
Important
Please keep a copy of these instructions in your files. There is
important replacement part information in them that will assist
you in the event a part is ever needed.
Assembly Information
Read all assembly instruction before starting assembly.
Verify that all parts were received by comparing the parts
received to the component list on page one.
If your product mounts to something (surface mount, in ground
or wall mount) you will assemble the entire product before
drilling holes or mounting frame in order to ensure proper
layout.
CONTACT YOUR DISTRIBUTOR ABOUT ANY PARTS YOU ARE
MISSING. You must report missing parts within 10 days of
delivery.
Hand-tighten all bolts during the initial assembly (unless
specifically told to tighten completely in the instructions). Once
the unit is fully assembled and square you should completely
tighten them.
Other than when a specific step in the assembly instructions
specifies “to not apply LocTite, we recommend applying a small
amount to all assembly bolts.
General Maintenance
It is recommended that you inspect the product monthly for
loose bolts and broken parts. If replacement parts are needed
please refer to these instructions for part numbers and
descriptions then call your distributor to order replacements.
Notes
Do not tighten bolts until the unit has been completely
assembled.
Refer to the two explosion drawings on page 1 for a visual
reference during assembly.
Version: 6B/Back_08.v2
www.sportsplayinc.com
2
Assembly Instructions
1. Connect one of the trash can halves (1) to the bottom
(2) using 3/8 x 1” bolts (4), 3/8” washer (5) and 3/8”
lock nuts (6).
2. Connect the other trash can half to the bottom
following the procedures from step 1.
3. Connect the two halves using 3/8” x ¾” button head
bolts (3), 3/8” washers (5) and 3/8” lock nuts (6).
4. Tighten all bolts.