SPORTSPOWER M7TEJ User manual

APPROXIMATE ASSEMBLY TIME 2 PERSON ASSEMBLY REQUIRED ASSEMBLY SPACE
90 minutes
REQUIRED ASSEMBLY TOOLS
ASSEMBLED DIMENSIONS
FLOOR AREA
4M X 3M X 3M
WEIGHT 27 KG, BUILD IN LOCATION
ASSEMBLY
INSTRUCTION
20/F, Parkview Centre, 7 Lau Li Street, Causeway Bay, Hong Kong.
After Service Centre ([phone], Email [email protected] or
visit www.sportspowerfit4kids.com
DESCRIPTION
M7TEJ
MULTIPLAY
WITH SWINGS, GLIDER,
SLIDE & BASKETBALL NET
3100mm
2150mm
1900mm

ASSEMBLY
INSTRUCTION
20/F, Parkview Centre, 7 Lau Li Street, Causeway Bay, Hong Kong.
After Service Centre ([phone], Email [email protected] or
visit www.sportspowerfit4kids.com
DESCRIPTION
M7TEJ
MULTIPLAY
WITH SWINGS, GLIDER,
SLIDE & BASKETBALL NET
PAGE 2 OF 25
•
•
•
•
•
•
•
•
•
We suggest you spend some time reading this guide before following
the simple step-by-step assembly instructions.
Do not discard any of the packaging until you have checked that
you have all parts and fittings listed. When discarding packaging
take care and consideration for others and the environment.
When assembling this equipment be aware of the safety of yourself
and others.
Because of the size of this multiplay we suggest that you assemble
it in the area intended for use.
Some of the assembly will be easier with two people. Seek assistance
when lifting large or heavy items.
Assemble this multiplay on a clean, flat and level surface e.g. the
cardboard packaging.
Keep any tools provided or spare fittings for future use. Only use
the tools specified.
Assemble all parts loosely, by hand, before tightening any bolts or
fixings.
we would suggest storing your multiplay inside or under a suitable
cover during winter to help protect against damage and maintain its
aesthetic appearance. For details of how to maintain your playset,
please refer to “maintenance section”.
BEFORE STARTING ASSEMBLY, PLEASE CHECK ALL PARTS ARE
INCLUDED. IF ANY PARTS ARE MISSING PLEASE CONTACT THE
HELPLINE ON ([phone].

ASSEMBLY
INSTRUCTION
20/F, Parkview Centre, 7 Lau Li Street, Causeway Bay, Hong Kong.
After Service Centre ([phone], Email [email protected] or
visit www.sportspowerfit4kids.com
DESCRIPTION
M7TEJ
MULTIPLAY
WITH SWINGS, GLIDER,
SLIDE & BASKETBALL NET
PAGE 3 OF 25
• WARNING! Not suitable for children under 36 months. Small parts/long cord-
Strangulation Hazard.
• This unit is designed to be used by up to5 children between ages 3to 8.
Maximum weight of 45kg each, simultaneously not to exceed a combined
weight of 225kg.
• Adult supervision is required at all times. Never leave children unattended.
• WARNING！Only for outdoor use.
• WARNING！Only for domestic use.
• Teach children to sit in the centre of the swing play items, with their full weight
in the centre of the seats. DO NOT allow children to lean tothe side when on
play items or to collide with other playmates. DO NOT allow children to stand
on the swing seat and slide.
• Dress children appropriately while on and around this equipment. DO NOT
• DO NOT allow children to slide down the slide head first.
allow children to wear ponchos, scarves, jewelry, loose shoes, jackets or
clothing with loose strings and/or clothing that might be potentially hazardous
whilst using this equipment.
• DO NOT let children use this equipment in any manner other than intended.
• DO NOT install over concrete, asphalt, gravel or any other hard surface which
may cause injury should a fall occur. Swing set shall be placed over protective
soft material such as sand bed, soft woodlark, and grass lawn. The depth of
sand and soft woodlark shall be a minimum of 6 inches.
• The anchor shall be placed level with or under the ground in order to reduce
tipping hazards.
• DO NOT let children use this equipment until it has been properly assembled
and anchored. Place equipment on level ground not
less than 2M from any
structures or obstacles such as fences, overhanging branches,
laundry or electrical lines, garages, sheds or houses.
• Do not allow children to swing empty play items as they may strike
other children or bounce back off the frame and strike the child.
• Instruct children not to walk closely in front of, behind or in
between moving play equipment. Instruct children to keep a safe
distance away to avoid being struck by the items in use.
• Instruct children not to twist chains or ropes, or loop them over
the support bar. This adds stress, reduces strength and may result
in failure and cause injury.
• Instruct children not to get off play equipment whilst in motion.
DO NOT allow children to jump from moving play equipment.

ASSEMBLY
INSTRUCTION
20/F, Parkview Centre, 7 Lau Li Street, Causeway Bay, Hong Kong.
After Service Centre ([phone], Email [email protected] or
visit www.sportspowerfit4kids.com
DESCRIPTION
M7TEJ
MULTIPLAY
WITH SWINGS, GLIDER,
SLIDE & BASKETBALL NET
PAGE 4 OF 25
•
DO NOT allow children to climb or play on the equipment whilst
wet (slips or falls may occur).
• DO NOT allow children to climb on or swing from str uctural mem-
bers (e.g. legs, top bar, basketball hoop,etc.) These are structural.
components ONLY and NOT play features.
• DO NOT allow children to swing play equipment more than 60
degrees.
• After completion of assembly, ensure all bolts and nuts are tightened
and in the correct position.
• DO NOT attach items to the playground equipment that are not
specifically designed for use with this equipment, such as, but not
limited to, jump ropes, clotheslines, pet leashes, cables and chains
as they may cause strangulation hazards.
• At the end of each play season, remove all plastic parts and take
indoors. DO NOT allow the use of plastic items when the tempera-
ture drops below 0 degrees.
• Dispose of all packaging properly after the unit has been assembled
• Please retain the assembly manual for future reference and review
• Do not orientate the slide towards the sun, this may lead to a child
becoming dizzy/disorientated through extended use.
• This product cannot be modified.
each season.
MAINTENANCE
• Check all nuts and bolts for tightness and tighten when required.
• Check swing seats, chains, and other means of attachments for
evidence of deterioration, replace when required in accordance
with the manufacturer’s instructions.
• This unit must be assembled by adults, ensure bolts and small
components are kept out of reach of young children.
• Check all fixings regularly, tighten if necessary, and that the
suspension system is secure.
• Check metal sections or components for signs of corrosion.
• Discontinue use if weakening or breakage found.
• Young children in play are unaware of potential dangers and
hazards, therefore responsible adults supervision is essential.
• Failure to comply with these precautions may result in injury
Disassemble and store indoors during the winter.
• Not suitable for hiring or commercial use.
• Never use the equipment in any manner other than intended.

ASSEMBLY
INSTRUCTION
ASSEMBLY
INSTRUCTION
20/F, Parkview Centre, 7 Lau Li Street, Causeway Bay, Hong Kong.
After Service Centre ([phone], Email [email protected] or
visit www.sportspowerfit4kids.com
DESCRIPTION
M7TEJ
MULTIPLAY
WITH SWINGS, GLIDER,
SLIDE & BASKETBALL NET
PAGE 5 OF 25
• Shredded bark mulch, wood chips, fine sand or fine gravel are
considered to be acceptable shock-absorbing surfaces when
installed and maintained at a sufficient depth under and around
playground equipment. However each material is only effective
when properly maintained. Material should be checked periodical -
ly and replenished to maintain correct depth as determined neces-
sary for your equipment. Otherwise serious injuries may occur
from a fall.
• Toys shall be accompanied by maintenance instructions drawing
attention to the need of carrying out checks and maintenance of
the main parts at regular intervals; if these checks are not carried
out the toy c
ould ove rturn and otherwise become a hazard. Whenever
practical, the instructions shall also be affixed to the toy.
• Please retain thes e ins tructions for future reference.
TIGHTENING NUTS & BOLTS
• At the start of assembly DO NOT tighten nuts or bolts fully, so
as to allow some possible adjustment for ease of assembly.
• After all major components are assembled, go back over all bolts
and nuts and properly tighten all of them before using this product.

ASSEMBLY
INSTRUCTION
20/F, Parkview Centre, 7 Lau Li Street, Causeway Bay, Hong Kong.
After Service Centre ([phone], Email [email protected] or
visit www.sportspowerfit4kids.com
DESCRIPTION
M7TEJ
MULTIPLAY
WITH SWINGS, GLIDER,
SLIDE & BASKETBALL NET
PAGE 6 OF 25
1 X1 2 X1 3 X1
4 X1 5 X4 6 X4
7 X1 8 X1 9 X2
10 X2 11 X2 12 X2
13 X2 14 X2 15 X2
16 X4 17 X4 18 X2
19 X2 20 X1 21 X1
22 X1 23 X4
Plastic Cap Long Plastic Sleeve
Footrest Swing Seat
Cross Bar Glide Top Tube
Upper Leg Lower Leg
Top Left BeamUpper Tube
Glide Seat Tube Glide Lower Tube
Basketball Board Basketball Net
Top Right Beam
Bracket
Cross Bar – With Two Holes
For Connecting Slide
Plastic Connector
Glide Seat
Plastic Connector
Short Plastic Tube
Basketball Hoop Anchor
VIEW PRODUCT
VIEW PRODUCT
VIEW PRODUCT
VIEW PRODUCT
VIEW PRODUCT
VIEW PRODUCT
VIEW PRODUCT
VIEW PRODUCT
VIEW PRODUCT
VIEW PRODUCT
VIEW PRODUCT
VIEW PRODUCT
VIEW PRODUCT
VIEW PRODUCT
VIEW PRODUCT
VIEW PRODUCT
VIEW PRODUCT
VIEW PRODUCT
VIEW PRODUCT
VIEW PRODUCT
VIEW PRODUCT
VIEW PRODUCT
VIEW PRODUCT

ASSEMBLY
INSTRUCTION
20/F, Parkview Centre, 7 Lau Li Street, Causeway Bay, Hong Kong.
After Service Centre ([phone], Email [email protected] or
visit www.sportspowerfit4kids.com
DESCRIPTION
M7TEJ
MULTIPLAY
WITH SWINGS, GLIDER,
SLIDE & BASKETBALL NET
PAGE 7 OF 25
A X10 B X4 C X4
D X2
G X2
J X12 K X12
M X8 N X26
P X1 Q X1
V X1
H X2
E X2 F X4
6mm
M8×50mm M8×54mm M8×114mm
M8×95mm M8×20mm M6×36mm
M6×60mm M6×36mm
xmm M8
S X4
M5
T X8
6 12mm
I X40
L X26
xmm
O X8
M6
R X4
M5×15mm
U X1
4mm
VIEW PRODUCT
VIEW PRODUCT
VIEW PRODUCT
VIEW PRODUCT
VIEW PRODUCT
VIEW PRODUCT
VIEW PRODUCT
VIEW PRODUCT
VIEW PRODUCT
VIEW PRODUCT
VIEW PRODUCT
VIEW PRODUCT
VIEW PRODUCT
VIEW PRODUCT
VIEW PRODUCT VIEW PRODUCT
VIEW PRODUCT
VIEW PRODUCT
VIEW PRODUCT
VIEW PRODUCT
VIEW PRODUCT
VIEW PRODUCT

ASSEMBLY
INSTRUCTION
20/F, Parkview Centre, 7 Lau Li Street, Causeway Bay, Hong Kong.
After Service Centre ([phone], Email [email protected] or
visit www.sportspowerfit4kids.com
DESCRIPTION
M7TEJ
MULTIPLAY
WITH SWINGS, GLIDER,
SLIDE & BASKETBALL NET
PAGE 8 OF 25
H2
Part list for slide
H4
H7
H9
X1
H6
H13
M6 X 25mm
H14
M6
6.5 X 13mm
H16 X6
H17
H12
H5
Connecting Part Connecting Plate
Slide(Right Part)
H3
Slide(Middle Part)
H7A
Slide Support (Left Part)
H8
Slide Ladder Steps
H1 X1
X2
X1
X2 X16
X4
X8
X6
H15 X14
X8
X1 X2
X1 X1
X2
H10
M6 X 9mm
6.5 X 13mm 6.5 X 10mm
Slide(Left Part)
Slide Support Tube
Slide Support (Right Part)
Leg Tube And Slide Connector
M6 X 30mm
X16
H18
8.5 X 19mm
X4
H11
M6 X 14mm
VIEW PRODUCT VIEW PRODUCT
VIEW PRODUCT
VIEW PRODUCT
VIEW PRODUCT
VIEW PRODUCT
VIEW PRODUCT
VIEW PRODUCT
VIEW PRODUCT

ASSEMBLY
INSTRUCTION
20/F, Parkview Centre, 7 Lau Li Street, Causeway Bay, Hong Kong.
After Service Centre ([phone], Email [email protected] or
visit www.sportspowerfit4kids.com
DESCRIPTION
M7TEJ
MULTIPLAY
WITH SWINGS, GLIDER,
SLIDE & BASKETBALL NET
PAGE 9 OF 25
J
x4pcs
L
x2pcs
N
x2pcs
E
x2pcs
Step 1
E
E
N
N
L
L
J
J
1
4
J
J

ASSEMBLY
INSTRUCTION
20/F, Parkview Centre, 7 Lau Li Street, Causeway Bay, Hong Kong.
After Service Centre ([phone], Email [email protected] or
visit www.sportspowerfit4kids.com
DESCRIPTION
M7TEJ
MULTIPLAY
WITH SWINGS, GLIDER,
SLIDE & BASKETBALL NET
PAGE 10 OF 25
Step 2
A
x4pcs
I
x8pcs
L
x4pcs
N
x4pcs
A
I
LI
N
5
5
3
5
55
5
1
1
2
3
2

ASSEMBLY
INSTRUCTION
20/F, Parkview Centre, 7 Lau Li Street, Causeway Bay, Hong Kong.
After Service Centre ([phone], Email [email protected] or
visit www.sportspowerfit4kids.com
DESCRIPTION
M7TEJ
MULTIPLAY
WITH SWINGS, GLIDER,
SLIDE & BASKETBALL NET
PAGE 11 OF 25
TIP: ENSURE TO ATTACH THE SWING SEAT TO
THE U BOLT FIRST.
Step 3
C
x4pcs
I
x16pcs
L
x8pcs
N
x8pcs
C
I
I
L
N
15
15
1
2
3

ASSEMBLY
INSTRUCTION
ASSEMBLY
INSTRUCTION
20/F, Parkview Centre, 7 Lau Li Street, Causeway Bay, Hong Kong.
After Service Centre ([phone], Email [email protected] or
visit www.sportspowerfit4kids.com
DESCRIPTION
M7TEJ
MULTIPLAY
WITH SWINGS, GLIDER,
SLIDE & BASKETBALL NET
PAGE 12 OF 25
Step 4
R
x4pcs
T
x8pcs
S
x4pcs
RTS
10
10

ASSEMBLY
INSTRUCTION
ASSEMBLY
INSTRUCTION
20/F, Parkview Centre, 7 Lau Li Street, Causeway Bay, Hong Kong.
After Service Centre ([phone], Email [email protected] or
visit www.sportspowerfit4kids.com
LN
I
A
I
DESCRIPTION
M7TEJ
MULTIPLAY
WITH SWINGS, GLIDER,
SLIDE & BASKETBALL NET
PAGE 13 OF 25
Step 5
A
x4pcs
L
x4pcs
N
x4pcs
I
x8pcs
10
10
5
5
5
5
5
6
6
66
6

ASSEMBLY
INSTRUCTION
ASSEMBLY
INSTRUCTION
20/F, Parkview Centre, 7 Lau Li Street, Causeway Bay, Hong Kong.
After Service Centre ([phone], Email [email protected] or
visit www.sportspowerfit4kids.com
DESCRIPTION
M7TEJ
MULTIPLAY
WITH SWINGS, GLIDER,
SLIDE & BASKETBALL NET
PAGE 14 OF 25
TIPS: #1 PLEASE ATTACH THE PLASTIC CAP(17) TO THE
#2 THE CROSS BAR (7&8) NEEDS TO BE ATTACHED
TO THE OUTER SIDE OF THE SWING FRAME
CROSS BAR(7&8) FIRST.
Step 6
B
x4pcs
J
x4pcs
L
x4pcs
N
x4pcs
I
x4pcs
6
17
7LN
J
B
I
10
10
8
7
6
6
6
6

ASSEMBLY
INSTRUCTION
20/F, Parkview Centre, 7 Lau Li Street, Causeway Bay, Hong Kong.
After Service Centre ([phone], Email [email protected] or
visit www.sportspowerfit4kids.com
DESCRIPTION
M7TEJ
MULTIPLAY
WITH SWINGS, GLIDER,
SLIDE & BASKETBALL NET
PAGE 15 OF 25
NOTE : ENSURE TO ATTACH THE PLASTIC
CONNECTOR(10) TO THE GLIDER TOP TUBE(9),
THEN INSERT SHORT PLASTIC TUBE(19) .
A
x2pcs
J
x4pcs
L
x2pcs
N
x2pcs
Step 7
4 10
19
9
9
J
4
9
J
LN
A

ASSEMBLY
INSTRUCTION
20/F, Parkview Centre, 7 Lau Li Street, Causeway Bay, Hong Kong.
After Service Centre ([phone], Email [email protected] or
visit www.sportspowerfit4kids.com
DESCRIPTION
M7TEJ
MULTIPLAY
WITH SWINGS, GLIDER,
SLIDE & BASKETBALL NET
PAGE 16 OF 25
G
x2pcs
K
x4pcs
M
x2pcs
O
x2pcs
K
x4pcs
M
x2pcs
O
x2pcs
H
x2pcs
Step 8
9
12
14
14
12
9
12
OMK
G
K
14
9
12
H
K
K
M
O

ASSEMBLY
INSTRUCTION
20/F, Parkview Centre, 7 Lau Li Street, Causeway Bay, Hong Kong.
After Service Centre ([phone], Email [email protected] or
visit www.sportspowerfit4kids.com
DESCRIPTION
M7TEJ
MULTIPLAY
WITH SWINGS, GLIDER,
SLIDE & BASKETBALL NET
PAGE 17 OF 25
F
x4pcs
M
x4pcs
K
x4pcs
O
x4pcs
I
x4pcs
N
x2pcs
D
x2pcs
L
x2pcs
Step 9
I
ILN
D
16
11
11
9
18
K
F
M
O
13
11
11
9
9
9
11
13
13
11

ASSEMBLY
INSTRUCTION
20/F, Parkview Centre, 7 Lau Li Street, Causeway Bay, Hong Kong.
After Service Centre ([phone], Email [email protected] or
visit www.sportspowerfit4kids.com
DESCRIPTION
M7TEJ
MULTIPLAY
WITH SWINGS, GLIDER,
SLIDE & BASKETBALL NET
PAGE 18 OF 25
H10
x14pcs x12pcs
H15 H18
x2pcs
Step 10
H3
H10
H18
H1
H3 H10
H15
H1
H2
H3
H1

ASSEMBLY
INSTRUCTION
20/F, Parkview Centre, 7 Lau Li Street, Causeway Bay, Hong Kong.
After Service Centre ([phone], Email [email protected] or
visit www.sportspowerfit4kids.com
DESCRIPTION
M7TEJ
MULTIPLAY
WITH SWINGS, GLIDER,
SLIDE & BASKETBALL NET
PAGE 19 OF 25
Step 11
H4
H4
H1
H3
H2
H3
H6
H1
H3
H2
H6
Slide H6 into the end of plastic sheet with teeth.
Gently push the plastic sheet upward with one hand, line up the teeth
with the corresponding indents on the bottom of H6 and push it gently
to slide it into place.
Turn slide over. With one person holding H6 firmly in place, another
person should insert H4 into the slots at the bottom of H6. Tip: it is easier
to install H4 by tilting H6 upwards.
1.
2.
Two people needed for this step.

ASSEMBLY
INSTRUCTION
20/F, Parkview Centre, 7 Lau Li Street, Causeway Bay, Hong Kong.
After Service Centre ([phone], Email [email protected] or
visit www.sportspowerfit4kids.com
DESCRIPTION
M7TEJ
MULTIPLAY
WITH SWINGS, GLIDER,
SLIDE & BASKETBALL NET
PAGE 20 OF 25
Step 12
H13 H15
H1
H2
H4
H4
H13
x4pcs
H15
x4pcs
H5 H5
H4
H1
H5