Spracht Aura Mobile BT MCP-2014 User manual
Quick Start Guide
Connecting to Bluetooth®phones
1. Press to turn on your Aura Mobile BTTM (AMBT™).
2. Turn on your mobile phone.
3. Press and hold until a chime sounds. Release .
4. Press and hold on your AMBTTM.. DO NOT release until
you hear a two note chime. The Bluetooth® light will ash
BOTH blue and amber.The AMBTTM is now ready for pairing.
5. Navigate to your Bluetooth® menu on your mobile phone
to pair to your AMBTTM. (You may need to refer to your
mobile phone’s user manual for pairing instructions.)
6. Use your mobile phone’s Bluetooth® menu to “Discover”
the AMBTTM, listed as “BTHS”.
7. Press“OK” if it prompts you to conrm.
8. For PIN or code, enter: 0000, then press “OK” to pair.
9. To make a call, dial the number on your mobile phone’s
keypad and press “Call”.
10. To answer a call, press on your AMBTTM or “Call”on your
mobile phone when you hear ringing.
11. To end a call, press on your AMBTTM or ”End” on your
mobile phone .
Note: The AMBT will remain paired to your mobile phone
until either one of these devices is powered o.
Bluetooth
®
Headset jack connection
cordless phone
Computer connection
VoIP speakerphone
OR
End View of Aura Mobile BTTM
2.5mm Data Cable
Line Headphones
Mic
(rev2)
Quick Start Guide
Connecting to computers for VoIP calls
1. Press and hold on your Aura Mobile BT™ (AMBT™)
until a chime sounds and the “Status” light ashes green.
2. Take the VoIP cable and connect the green headphone plug
into the headphone jack (typically green) on your computer.
3. Connect the pink microphone plug into the microphone
jack (typically pink) on your computer.
4. Connect the black plug into the “Line”jack on your AMBT™.
5. Launch your computer’s VoIP application to make a call.
Connecting to cordless and desktop phones
(with headset jacks)
1. Press and hold on your Aura Mobile BT™ (AMBT™)
until a chime sounds and the “Status” light ashes green.
2. Connect one end of the cordless phone cable into the“Line”
jack on your AMBT™.
3. Connect the other end of the cable to the headset jack on
your cordless phone.
4. If you hear feedback or echoing from the AMBT™, you
must switch to the alternate acoustic setting. To do so, press
and hold and at the same time. DO NOT release until
the “Status” light ashes rapidly.
5. The AMBT™ is now ready for use.
End View of Aura Mobile BTTM
Phone cable
Table of contents
