Squirrel CREATURE User manual

USER MANUAL
PLEASE READ THIS CAREFULLY BEFORE DOING ANYTHING WITH YOUR NEW WINGSUIT
Congratulations on your purchase of a Squirrel CREATURE (“product”). By purchasing this product,
you acknowledge that engaging in sky-diving, BASE jumping, parachuting, and “wingsuiting” is an
inherently dangerous activity that requires training, proficiency, and skill. Use of this product may result
in serious injury or death. Do not use this product without inspecting it and all of its components before
each and every use. You acknowledge and agree that even when properly used, this product may cause
serious bodily harm or even death. You, the purchaser, acknowledge and agree that this product is
intended for inherently dangerous recreational purposes, and you assume all risk, responsibility, and
liability whatsoever from any and all injuries (including death), losses or damages to persons or property
arising from the use of this product sold by Squirrel, LLC to you, the purchaser. Squirrel is not liable for
any special, consequential, incidental, punitive, or indirect damages or anticipated profits, however
caused, in relation to the purchase and use of this product. In no event shall Squirrel’s total liability to
you, as purchaser, or your assigns, heirs, representatives, and other similarly situated persons, for all
damages, losses, and causes of action exceed the purchase price paid by you, the purchaser, for this
product. This product has been purchased by you “as is” and without warranties of any kind, either
express or implied. To the fullest extent permissible pursuant to applicable law, Squirrel, LLC disclaims
all warranties, express or implied, including, but not limited to, warranties of title and implied warranties
of merchantability and fitness for a particular purpose.
Contents
High Aspect Ratio Inlet.............................................................................................................................................................................. 3
Air Cross-Section (“Arm Foam”) Options ...................................................................................................................................................3
Attaching Your Suit and Gearing Up..........................................................................................................................................................4
Zipper Bungees.........................................................................................................................................................................................4
Holding Your Gripper, and Positioning the Leading Edge of Your Suit........................................................................................................ 5
The MonoChamber.................................................................................................................................................................................... 6
Arm and Leg Wing Internal Zippers ..........................................................................................................................................................6
Nutsack ....................................................................................................................................................................................................6
Chest Pocket .............................................................................................................................................................................................6
Leg Wing Zipper Pulls...............................................................................................................................................................................7
Hook Knife ...............................................................................................................................................................................................7
Sleeping And Bathing Your Squirrel .......................................................................................................................................................... 7
Contact Us ................................................................................................................................................................................................ 7

1
BEFORE YOU BASE, SKYDIVE.
BEFORE YOU GET TOO CRAZY WITH YOUR CREATURE, TRAIN!
Even our most experienced team pilots need many skydives (10, 20, 30+, perhaps!) before
they feel comfortable and confident in new wingsuit designs. These are people with 10+
years of experience, thousands of skydives, and over 1000 BASE jumps. Please take your
responsible progression seriously: skydive your wingsuit extensively before you BASE jump
it, and train in your wingsuit extensively before you attempt any advanced maneuvers.
The CREATURE is designed for the most experienced wingsuit pilots. It is an uncommonly
powerful freestyle suit with no current peer in the wingsuit industry. It shares design and
performance traits with high performance race suits such as the C-Race. You should only
choose the Creature if you already have a significant amount of experience in intermediate-
advanced designs.
Respect the limits of your abilities and progress slowly. Seek coaching and qualified
instruction, and always maintain awareness of your surroundings. It is your responsibility to
avoid collisions with other wingsuit pilots, parachutes, all air-traffic, and the planet Earth.
Skydiving and BASE jumping are extremely dangerous, and complacency kills

2

3
.USE, CARE, AND FEEDING OF YOUR SQUIRREL
High Aspect Ratio Inlet
The new High Aspect Ratio Inlets on the front side of your
suit require some care. Try not to store your suit in a tightly
packed configuration. Do not store your suit folded tightly in hot
conditions. For instance, don’t leave it crammed into your stash
bag in a hot car for a few hours. In the case of inlet deformation,
massaging them into shape at or above room temperature will
help to reform them.
Air Cross-Section (“Arm Foam”) Options
Your CREATURE is shipped with 5mm black foam, which is inserted in the arms. We recommend
starting with this foam option. The CREATURE may be jumped without this foam, but your leading
edge will appear less smooth, and be less efficient in flight.
THE AIRFOIL CROSS-SECTION “FOAM”
he optional profile-shaped foam is recommended for experienced pilots. It improves speed and
glide performance, and makes transitions feel more agile and precise. Adding in this enhanced
leading-edge structure will slightly change the BOC and Riser access. Use caution when BASE
jumping, or in any situation where a low deployment may occur.

4
Attaching Your Suit and Gearing Up
For a comprehensive video on how to attach your container to your wingsuit, please watch our
Gearing Up video: http://squirrel.ws/gearingup
Zipper Bungees
The bungees that hold the zippers tight to the main lift webbing (MLW) of your harness must always
be connected. DO NOT jump your suit without the zipper bungees set tightly around your harness
MLW. Securing the bungees on the inside of the MLW usually results in the zippers being closer,
and the hole being smaller.
We highly recommend using a standard pillow handle as the best choice for wingsuit flying. For
more detailed information on the decision of what handle type is best, please see our Reserve
Handle Information PDF here: http://squirrel.ws/handles
NOTE: If you think that the zipper system is not functioning well with your skydive harness (i.e. your
emergency handles are not always 100% accessible), please contact us before your next jump.
You may need to modify the zippers so that the sliders stay locked in place, as per the information
at this URL: http://squirrel.ws/zipperstuff
Keep zippers close against MLW webbing. Handles completely exposed.
Zippers tight against MLW.

5
Holding Your Gripper, and Positioning the Leading Edge of Your Suit
Holding your grippers correctly is an important part of controlling your CREATURE. The carbon
fiber reinforced end cell allows you to move your hand easily from the top surface to the bottom
surface as you transition and move through maneuvers, while providing an aerodynamic inflated
wingtip which is partially enveloped by your hand. We like to cradle the top of the gripper gently
between thumb and forefinger, or let the top of the gripper rest in our palm. We frequently change
hand position on the gripper as we transition from back to belly flying and back again. It is NOT
necessary to hold the gripper tightly. You can comfortably fly your suit from exit to deployment with
a very light touch on the grippers. We find it very helpful to place the palm of our hand on the
front surface of the suit while backflying.

6
The MonoChamber
The CREATURE uses the MonoChamber design. Air flows through channels located behind the upper
leg area, allowing the arm wings and leg wing to share pressurization. In addition to smoothing out
the leg wing / arm wing junction at the top surface, the MonoChamber creates a more consistent
and coordinated feel in the wing. The most descriptive word we can use is “homogeneity”. The suit
feels more homogenous and compact in maneuvers, as the wings are no longer separate chambers.
Initially concepted purely for drag reduction on high performance suits, we were pleasantly surprised
to feel the significant handling improvement as well.
Arm and Leg Wing Internal Zippers
The CREATURE’s internal pressure can be
fully customized. For the greatest range and
performance, we recommend flying with zippers
closed. You may experiment with opening them to
reduce internal pressure in the arm and leg wings,
which will make the arm wings feel more supple
and may be to your liking for certain maneuvers.
Make zipper-checks a part of your pre-flight
checklist - zips should be set symmetrically and in
the position you intend, before exit.
Nutsack
Your nutsack is designed to carry your Pocket
Stache (useful in the case of an off-landing) and
small, lightweight accessories.
Chest Pocket
The chest pocket can be used as a belly-cam
access zip while also having your phone secured
behind the Velcro strip. Note that it zips open
/ closed from both sides, so always keep your
phone behind the velcro strip in case one or both
of the zippers are left open.

7
Leg Wing Zipper Pulls
Always fasten your leg wing zipper pulls. If you walk around
with them dragging on the ground, you will ruin them. If your
suit is on, have the zipper pulls connected. Do not drag them
through the dirt.
Hook Knife
Every suit comes standard with an aluminum handle
double-blade hook knife. Check to make sure that the
hook knife is loaded properly and secured.
Sleeping And Bathing Your Squirrel
Don’t smother your Squirrel! When it’s hibernating, it likes to breathe and relax in a cool, dry,
comfortable nest. Do not store your suit for long periods of time in a tightly folded or compressed
manner. Always fully shade-dry your suit if it becomes wet or damp. Gently rinse with fresh water
to clean, or if ever exposed to salt water. Never use chemical detergents – Squirrels like it all
natural, all the time!
Your suit can be hand washed in cold water, or machine
washed cold on a gentle cycle. Never tumble dry your suit.
Hang dry in the shade.
Contact Us
Please consider the following important points:
1. We designed, tested, and built your wingsuit.
2. Our job is to make sure that you fly as safely as possible, while having the most fun possible.
3. Our job is to help you understand, use, and progress in, your suit.
4. Our job is to answer your questions, and we like our job.
For these reasons, we highly recommend that you contact US (SQRL) if you have any questions
about any product that we make. We 100% guarantee that the information you receive from us
will be more relevant, more accurate, and more thorough than anything you can find in facebook
comments, internet forums, or even your DZ rigger / gear shop guru. So, again, call us. Email us.
Together with your dealer & the local SQRL pros near you, we’re here to help.
-Matt, Mike, Will, Marty, & All the Team.
www.squirrel.ws
[e-mail]
+1-855-FLY-SQRL
THANK YOU FOR FLYING SQUIRREL!
v.202205 - Check the CREATURE product page at www.squirrel.ws for the latest PDF version of this manual.