SRS Lighting DTS16R-DIN User manual

( 1 / 4)
Instruction Manual
Models:
version 1.0 since 8 September 2017
ATTENTION!
This instruction manual contains important information about the installation and the use of
the equipment. Please read and follow these instructions carefully.
Always ensure that the power to the equipment is disconnected before opening the
equipment or commencing any maintenance work.
DTS16R-DIN_en_manual_M258.doc
DIN-RAIL relay switch
DTS16R-DIN

( 2 / 4)
IMPORTANT SAFETY INFORMATION
The following general safety precautions have to be observed during all phases
of operation, service, and the repair of this equipment. Failure to comply with
these precautions or with specific warnings in this manual violates safety
standards of design, manufacture, and the intended use of this equipment.
Do not operate in an explosive atmosphere!
Do not operate this equipment in the presence of flammable gases or fumes.
Operation of any electrical instrument in such an environment constitutes
a definite safety hazard. Device should be never placed near or over a heat
register or other source of heated air and it should not be installed or operated
without proper ventilation.
DMX connection
DMX connectors are located on top side of board. DATA LED is indicating
presence of DMX data stream on DMX input

( 3 / 4)
Device in use / service:
By default, Power LED indicates the device is on main power. When the Power
LED is off, check the main power input.
When the DMX cable is connected to the device, LED marked as DATA OK go on.
If case of any problems, do not hesitate to contact us via email at rma@srs-
group.com or call us at [phone]. Don’t worry; we will fix your problems
for sure.
Technical data
AC/DC Power input:
DC 12-36V, 160mA
AC 12-24V, 160mA
RELAY rating:
3A/250V AC, max power: 750VA
3A/30V DC, max. power: 90W
DMX Input / Output:
1x USITT DMX512 /RS485/ isolated up to 1000V
Size & Housing:
111 x 96 x 59mm, 6 module DIN plastic box
Simple schematics
Weight:
0.32 kg
Temperature of use:
-30...+45°C
Warranty:
2 years

( 4 / 4)
DECLARATION OF CONFORMITY
According to guidelines 89/336 EEC and 92/31 EEC:
Name of producer: SRS Group s.r.o.
Address of producer: Rybnicna 36/D, SK- 83106 Bratislava, Slovak Republic
Declares that the product
Name of product: DTS16R-DIN relay switch
Type: DS16R-DIN
Corresponds to the following product specifications:
Safety: EN60065, resp. EN 60950
EMC: EN55103-1, resp. EN55103-2
Bratislava, 19 August 2012
Robert Sloboda
Copyright 2017 SRS Group, s.r.o. | Specifications subject to change without notice.
Document: DTS16R-DIN_en_manual_M258.doc | Version 1.0 | Actual as of: 8 September 2017
SRS Group s.r.o.
Rybnicna 36/D | 831 07 Bratislava | Slovakia
Phone: [phone] | Fax: [phone]
Email: [email protected] | www.srs-group.com