UTEPO UTP6306TS-PSD User manual

Quick Installation Guide
1
2
Packing List
Please check the following items after unpacking, if any missing, please contact your local dealer.
Items
Quantity
Switch
1 pc
Mounting Accessory
1 set
Quick Installation Guide
1 pc
Product Overview
The series product is Industrial 4-Port Gigabit PoE++ 1-Port Gigabit RJ-45 1-Port Gigabit SFP Unmanaged
Ethernet Switch.
The switches provide 4*10/100/1000Mbps Ethernet RJ-45 ports, 1*10/100/1000Mbps Ethernet RJ-45
uplink port, 1*1000Mbps SFP uplink port. It meets IEEE 802.3af/at/bt standard. All downlink RJ-45 ports
support Power-over-Ethernet (PoE++), which can deliver up to 90W power per port.
The switches support the Q-PoE (Quick PoE) technology, which enables PoE power supply immediately
upon switch startup without waiting for switch system software control.
The switches support 2 working modes through DIP switch: Default and CCTV. Under CCTV mode, the
transmission distance is extended up to 250m, but the rate is limited to 10Mbps. The wide voltage input
model uses 12 to 57V DC wide voltage input and is designed for high availability applications. It can be
widely used in video security monitoring systems, network projects, etc.
Appearance and Dimensions
Dimensions (mm)
Front Panel
Non-wide Voltage Input Model Side Panel
Wide Voltage Input Model Side Panel
Indicator
Indicator
Color
Status
Description
PWR1/PWR2
Power Supply
Indicator
Green
Solid On
Power supply is on.
Off
Power supply is off.
ALM
Alarm Indicator
Red
Solid On
The device alarms.
Off
The device is working normally.
DIP Switch
The switch supports 2 working modes through DIP switch.
Mode
Description
Default
All ports are free to communicate, transmission distance: 0~100m.
CCTV
The transmission distance is extended up to 250m, but the rate is limited to 10Mbps.
Init Button
By pressing the button over 5s, the switch will be restored to the original factory default setting.
Industrial 4-Port Gigabit PoE++ 1-Port Gigabit RJ-45 1-Port
Gigabit SFP Unmanaged Ethernet Switch Quick Installation Guide

Quick Installation Guide Quick Installation Guide
3
4
Caution
Power on the system only after confirming that the wiring is correct, to avoid damage to the equipment. It
is recommended to use the power adapter and power cable in the package to connect the power supply.
For better transmission performance, it is recommended to use Cat5 or better Ethernet cable to connect
the switch and powered devices.
For better protection performance, it is recommended to always make the ground connection first and
disconnect it at the end when operating the device.
Before operating or maintaining the switch, please read the user manual carefully to avoid equipment
damage caused by misoperation.
Product Installation
1) Before installation, power off the equipment. Installation when device is powered on is prohibited.
2) The switch supports DIN-rail/Desktop/Wall mounted installation. Following with the DIN-rail installation steps:
Step a: Fix the bracket to the backside of the device with screws.
Accessories
Bracket
Screw
Step b: Install the device to the DIN rail.
3) After the above steps are completed, connect the switch and other equipment using a high-performance
Ethernet cable.
4) Check the installation and the wiring. After confirming that the connection is correct and reliable, power on
the switch.
The installation is completed.
Specifications
Item
Non-wide Voltage Input Model
Wide Voltage Input Model
Hardware Specifications
Downlink Port
4*10/100/1000BASE-T PoE++ RJ-45(Auto-MDI/MDI-X)
Uplink Port
1*10/100/1000BASE-T RJ-45
1*1000BASE-X SFP
Management Port
1*Relay
DIP Switch
CCTV mode: the transmission distance is extended up to 250m, but the rate is limited to 10Mbps.
LED Indicators
2*PWR, power supply indicators
1*SFP port state indicators
1*ALM, alarm indicator
Dimensions (W*D*H)
160mm*110mm*44mm
Net Weight
0.68kg
0.74kg
Input Voltage
Support redundant power supply, Power 1 (Main): 48~57V
DC, Power 2 (Backup): 48~57V DC
Support redundant power supply, Power 1 (Main):
12~57V DC, Power 2 (Backup): 12~57V DC
Power Consumption
≤370W (Full load including PoE)
≤250W (Full load including PoE)
Material
Metal shell
Installation
DIN-rail/Desktop/Wall mounted
Switch Property
Standards
IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3x, IEEE 802.1D, IEEE 802.3af, IEEE 802.3at,
IEEE 802.3bt
Forwarding Modes
Store and forward
MAC Table
2k, support auto learning
Switching Capacity
12Gbps/non-blocking
Packet Forwarding
Rate
8.928Mpps
Port Buffer
1MB
Jumbo Frame
9716 Bytes
Power Supply
PoE Standard
IEEE 802.3af/at/bt
PoE Power Supply
Type
End-span
PoE Pin Assignment
3/6/4/5(+), 1/2/7/8(-)
PoE Budget
90W max for each port, 360W max for whole switch
90W max for each port, 240W@48V, 120W@24V,
60W@12V max for whole switch
Alarm Signal Output by Relay
Alarm Signal Output by
Relay
Support relay alarm for power off
Reliability
ESD
IEC61000-4-2, Level 3: Contact Discharge: ±6kV, Air Discharge: ±8kV
Surge
IEC61000-4-5, line to earth: 6kV
Operating
-20℃~65℃, 5%~95% (Non-condensation)
Storage
-40℃~85℃, 5%~95% (Non-condensation)
Certifications
Certifications
CE, FCC
Version: V1.0, updated 2023-04-12.
The information in this document is subject to change without notice.
Every effort has been made in the preparation of this document to ensure accuracy of the contents, but all statements,
information, and recommendations in this document do not constitute a warranty of any kind, express or implied.