Stackajack SJ100-120/CCB1 User manual
Introduction
Congratulations on becoming the
owner of a Stackajack Clevercrib. Make
sure you register your product at
www.stackajack.com for a chance to win
some other great Stackajack products. You
will also nd all the information you need
about the Stackajack product range, how-to
videos and our contact details should you
wish to get in touch.
Product information
This box contains all the parts you need
to put together your Clevercrib. You won’t
need any tools. It’s quick and easy to
assemble. Please check that you have all
the parts you need before you start (see
“what’s in the box” page). These parts are
also all you need to turn the Clevercrib into
a table and two chairs when your baby
outgrows it. See the assembly instructions
or watch the instructional videos on our
website for more details.
The Clevercrib is suitable for newborn
babies to sleep in up to about 6 months,
or when he can sit, kneel or pull himself
upright unaided to sleep in. It requires a
square-end crib matress size 38cm x 89cm
(not included). Please use the mattress
height markings on the crib to ensure the
thickness of the mattress is suitable.
The Clevercrib has a handy, built-in storage
shelf and four, easily adjusted height
settings for your comfort.
The Stackajack table and chairs are
suitable for children between around 1
and 5 years and can be used for eating,
playing, painting, colouring or homework.
The table has three easily adjusted height
settings and the chairs have two. This
provides comfort to children of different
ages as they grow.
Care and maintenance
Clean with mild soap and water, rinse well
and dry. Do not immerse in water. Spills
should be cleaned immediately. Do not
use bleach acids or solvents. Colours
may change if they are exposed to the
sun. Timber is a natural material and can
swell and contract depending on hot
or cold conditions. If you nd over time
that your Clevercrib or table and chairs
become difcult to assemble, apply some
natural beeswax or similar to the areas to
ease assembly. The nature of handmade,
timber products is that there may be slight
variations in the product.
Materials and Safety
Made of Birch plywood and meets FSC
standards for responsible forestry.
Meets European formaldehyde emission
standards.
Tested and complies with British and
European safety standards;
BS EN 1130-1:1997
BS EN 71-3:2013
Other products in the
Stackajack Range
Visit www.stackajack.com to see lots
more great Stackajack products, kits and
accessories that are available to help you to
get even longer more exible use from your
Clevercrib.
We recommend;
Stackjack Hichair Kit. Combine this kit
with the Clevercrib legs to make a cute
highchair for your baby when he grows
out of the crib. Complete with removable
tray, it can be safely used as a standalone
highchair or at the family table.
Stackajack Handiholders. These handy
clip-on accessories can be attached to your
Clevercrib, table and Hichair to hold those
bits and pieces that you want to keep tidy,
yet close to hand.
Stackajack seat pads. These enable you
to customise your Hichair and table and
chairs. Add some colour and comfort!
Assembly instructions
Part 1: How to make your Clevercrib Part 2: Turn your Clevercrib into a table & chairs
Model No. SJ100-120/CCB1
Warning
Important please read carefully before use
and retain for future reference.
Warning – Important please
read before use
A child who can sit, kneel or to
pull himself up unaided should
not use the Clevercrib.
Warning: Do not leave your child
unattended.
Warning: Do not use if any part is broken,
torn or missing. Assembly to be carried out
by a competent adult only.
Warning: Keep away from open res and
other sources of strong heat, such as
electric bar res, gas res etc.
Warning: Keep the crib locked in the xed
position when a child is in it unsupervised.
Keep children away from the product
during assembly to avoid the possible risk
of injury.
Regularly check all fastenings or xings
to ensure that they are properly tightened
or secured. Pay special attention to the
Stackajack locks, making sure they are
properly inserted.
Ensure that all assembly ttings are
tightened properly and that care should
be taken that no parts are loose, because
a child could trap parts of the body or
clothing (e.g. strings, necklaces, ribbons for
babies’ dummies, etc.), which would pose a
risk of strangulation.
Use indoors only.
Clevercrib
Place the Clevercrib on a horizontal oor
fully assembled before use.
Don’t allow young children to play
unsupervised in the vicinity of the
Clevercrib.
Take care when adjusting the height and
make sure a competent adult only does
this.
Don’t lift the Clevercrib while a child is
inside.
Do not use the body of the Clevercrib
without its frame.
Mattress not included. This Clevercrib
requires a square end crib mattress
(38cm x 89cm), available separately.
For safety, it is recommended that the
distance between the top of the mattress
and the top of the Clevercrib sides is at
least 200mm. Please refer to the markings
on the Clevercrib which indicates the
maximum thickness of the mattress.
Table & chairs
Ensure that the table is placed on a
horizontal oor.
Take care when adjusting the height and
make sure a competent adult only does
this.
Do not use the table and chairs unless
all components are correctly tted and
adjusted.
Do not sit or stand on the table, or allow
children to stand on the table in case they
fall.
Do not use the chair as a step, stool or
booster seat.
The chairs are intended for use with the
Stackajack seat pads, sold separately.
Contact details
Stackajack Products Ltd,
9 Honey Park, Sallynoggin,
Co. Dublin, Ireland.
Email: [email protected]
www.stackajack.com
2
Stackajack locks x 2
Crib side & seat base x 2
Crib side & seat side x 4
Table end & base x 1
Crib & table legs x 2
Female stretcher x 1
Height adjustor peg x 2
Circular locker x 4
Height adjustor knob x 2
Male stretcher x 1
Crib end x 2
What’s in the box
The bits you need to make your
Clevercrib or table & chairs
3
Table and crib height adjustment sizes
Part 1.
How to make your Clevercrib
1
3
2
4
4
6
5
5
8
9
7
6
11
10
7
maximum mattress
height mark
12 Your completed Clevercrib!
Table and crib height adjustment sizes
8
1
2 3
Part 2.
Turn your Clevercrib into a table & chairs
9
Chair height adjustment sizes
4
10
6Your completed table & chairs!
Table and crib height adjustment sizes
11
Designed and made in Ireland.
Stackajack Products Ltd,
9 Honey Park, Sallynoggin,
Co. Dublin, Ireland.
Email: [email protected]
www.stackajack.com
Table of contents
