Stallion HD-028 Programming manual

1. CAREFULLY read this manual
and follow all instructions.
2. Unfold the product and spread
out FLAT onto grassy or sandy
area with NO sharp objects.
3. GENTLY inflate the chambers in
the recommended sequence
(Refer to Inflation Sequence table
to the right).
4. Close all valves COMPLETELY.
5. Install the Battery (Refer to
“Using the speaker device” shown on the user manual) to your speaker, and test the
Speaker is pairing with your music play device before install it to your the product.
6. Follow below instruction to operate your Speaker.
TURN ON & OFF YOUR SPEAKER
Press and hold the “ O ” icon button to turn on or turn off the device.
When Speaker is ON or OFF, you will hear a Music alert
PAIRING
Prior to using the speaker for the first time, you must pair it with a Bluetooth-enabled
device eg. your Smartphone, iPad, iPhone etc.
You will hear a Music alert once pairing is completed, you may access the following
functions.
- Press 1 time the “⏸▶” icon button, play or pause the music.
- Press and hold the “❮-” or “+❯” icon button to increase or decrease the volume.
- Press the “+❯” icon button by 1 time, play next track.
- Press the “❮-” icon button by 1 time, play previous track.
IMPORTANT NOTE: Whenever Bluetooth connection/link is removed, for example:
power off on speakerphone/mobile handset or out of 10 meter sensing distance,
please activate connection/link as suggested.
CAUTION :
- The user must read the user manual carefully and fully understand the usage before
using this product.
- Always ensure the speaker is securely attached on the Inflatable and works properly
every time before use.
- ALWAYS remove the speaker from the product after every use.
- Only change battery when you are on ground away from water. Make sure the speaker
is completely dry before opening the battery chamber.
- Never place the speaker directly into water.
- When connected to your music player device, make sure your device is protected by
water proof pouch (not included). We are not liable to the damage or loss of any
music player device (e.g., smart phone, mp3 player) in any case.
7. Follow the Music Speaker Marking printed on the product, and GENTLY insert the
bottom part of the Speaker to the hole on the product (Fig A).
8. Fill anchor bag with SAND ONLY.
9. Attach one end of the anchor bag rope (3 m or 10 ft.) to the Anchor Bag by threading
the rope through holes on bag and tying a double knot at the end of rope. Thread the
other end of the anchor bag rope to the inflatable product through the eyelets
attached to the product. If ropes are attached to anchor bag correctly, the weight of
the sand will cinch the anchor bag closed. This will ensure that no sand escapes from
bag while in the water. Verify before each usage if anchor weight is sufficient for the
number of users.
10. Measure the exact length between the eyelet on the product and anchor bag placed
at the bottom of the lake (Use a longer rope (NOT INCLUDED) if the depth of the lake
is over 3 m (10 ft.). Your rope needs to be adjusted in order for the product to be well
anchored in the lake. Firmly tie the end of rope to the eyelet on the product to ensure
anchor stays attached to the product.
Please make sure NOT to over inflate this product. The inflatable unit should be
FULL, but NOT TOO FIRM. During the daytime or under hot temperatures, the air
inside the product can heat up and expand causing an increase in pressure and a
possible rupture. To avoid rupture on the product, air pressure can be released
by letting out small amounts of air through the valves. BE SURE there are no
people on the product during inflation and deflation.
Safety warning labels:
While assembling this product, take a few moments to read the warning labels for Safety
Instructions.
Inflate the chambers in following sequence:
INFLATION SEQUENCE TABLE
1. Always inflate FIRST the smaller or upper
level chamber(s) if applicable to your
particular product.
2. SECONDLY, inflate the main or base
chamber.
Upper Chamber
Main Chamber
Upper Chamber
Main Chamber
QUICK START INSTRUCTIONS
BEFORE YOU POST A REVIEW, LET US MAKE SURE YOU ARE HAPPY WITH THIS PRODUCT.
CALL [phone] OR EMAIL [email protected] WITH ANY ISSUE.
Music Speaker Marking
A
© 2018 Body Glove IP Holdings, LP used under license.
All Rights Reserved.

WARNING: Changes or modifications to this unit not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help
The device must not be co-located or operating in conjunction with any other antenna or transmitter.
BGNP#18003