Stanley Furniture 584-x3-50 BTG User manual

Model Number:
584-x3-50 BTG CRIB
536-x3-50 BTG CRIB
537-x3-50 BTG CRIB
560-x3-50 BTG CRIB
575-x3-50 BTG CRIB
Your little one will sleep securely in this Stanley Furniture Crib. Proper assembly
will ensure every effort has been made to design this crib with your baby's safety in
mind. It is certified to meet all safety guidelines established by ASTM International
and the CPSC-Consumer Product Safety Commission.
Thank you for purchasing a Stanley Furniture Crib. If you find that you are missing
a part or if a part is defective in any way, contact your Stanley Furniture retailer for
assistance.
Built to Grow Crib Assembly Instructions
IMPORTANT - RETAIN FOR FUTURE REFERENCE - READ CAREFULLY

2
! : 


 


 

 

 


 

 

 





 


 
 
 

 
 

 
 

 
 

  
 


 
 


3
The crib illustrations in these instructions are generic in nature. The crib you have purchased
may not look like the ones illustrated; however, they all assemble in the same manner.
Identifying the Parts
Left Crib End
Mattress Spring Platform
Right Crib End
Headboard Footboard

4
8 Connector Bolts
2” (1/4” x 20 thread)
Identifying the Hardware
Identify the hardware included using the illustrations below
2 Allen Wrenches
8 Connector Bolts
3/4” (1/4” x 20 thread)
2 Metal Locator Pins
4 Metal Brackets
with Studs
1 Wrench 4 Caps
8 Cap Nuts
8 Lock Washers

5
Crib Assembly
NOTE: Read all instructions before assembling crib. KEEP INSTRUCTIONS FOR
FUTURE REFERENCE.
Attached to the mattress platform is a sleeve to store the instruction booklet.
After assembly is complete, return this instruction booklet to the sleeve for future
reference.
This crib conforms to the ASTM International and the CPSC-Consumer Product Safety
Commission guidelines for product safety. Please adhere to the guidelines in this book-
let for assembly, use and maintenance.
Note the recommendations below:
 Power tools are not recommended for assembly.
 Give yourself plenty of room to work.
 Due to the size of this bed, it must be assembled in the space it will occupy.
 The assembly will take two people to complete.
 Layout all the hardware and make sure that the proper length bolts are used in the
designated areas.
 Do not substitute hardware. If an item is missing or damaged contact Stanley
Furniture Company immediately for replacement. Inspect all component parts and
hardware prior to beginning the assembly process.
 Make sure all fasteners are tight.
 Above all, take your time and read the instructions carefully.
Tools required for Assembly:
 Allen Wrenches (provided)
 Box End Wrench (provided)

6
Attaching the End Sections
Step 1:
 Using (4) 2” (1/4” x 20 thread)
connector bolts, insert the bolts
from the back of the crib head-
board and tighten with the provid-
ed wrench. See Fig 1a.
 Support the headboard and attach
one end section to the headboard
by aligning the connector bolt in
the headboard with the upper hole
in the end section. See Fig 1.
 Repeat for the remaining End
Section.
 Fig 2. is how your crib should
look.
 look.look.
Figure 1.
Figure 2.
Ends assembled to headboard.
Figure 1a.
Enlarged view.
Allen wrench
2” (1/4” x 20 thread) Connector bolt
Headboard
End Rail
End Rail

7
Attaching “L” Metal Bracket to Mattress Platform
Step 2:
 Attach metal “L” brackets to the
crib mattress platform as shown Fig
3.
 Using (8) cap nuts and (8) lock
washers, attach the “L” brackets to
each end of the mattress platform
and tighten with the provided
wrench. See Fig 3a.
 Repeat for the remaining end.
 Fig 4. is how your mattress platform
should look.
Figure 3.
Figure 4.
Assembled “L” metal brackets to
mattress platform.
Figure 3a.
Enlarged view.
Metal Bracket
Cap Nut
Wrench
Lock
Washer

8
Attaching the Mattress Platform
Step 3:
 Attach the mattress platform in the desired
position. (Before inserting the bolts, make
sure the instruction holder and the warning
label are facing up and readable as shown in
Fig 5 and the mattress platform is level.
 Using (4) 3/4” (1/4”x 20 thread) connector
bolts to attach the mattress platform. Insert
each bolt through the “L” bracket and loose-
ly start the bolt into the threaded inserts lo-
cated in the crib ends and headboard posts.
See Fig 5a.
 Do not tighten the bolts at this time.
 When the child is able to pull to a standing
position, set the mattress platform to the
lowest position and remove large toys and
other objects that could serve as steps for
climbing out.
 Fig 6. is how your crib should look with
Warning labels facing the front of the crib.
Figure 5.
Figure 5a.
Enlarged view.
Allen wrench
3/4” (1/4”x 20 thread) Connector bolt
Figure 6.
Spring Mattress assembled to end rails & headboard.
Headboard
Higher Position
Mattress Platform

9
Attaching the Footboard
Step 4:
 Insert the two metal locator
pins in the crib end posts at this
time.
 Attach the footboard by align-
ing the footboard with the met-
al locator pins. See Fig 7a.
 Using (4) 2” (1/4”x20 thread)
connector bolts, loosely attach
the footboard as indicated in
Fig 8.
 After the bolts have been at-
tached, use the wrench provid-
ed to tighten each of the bolts
to secure the footboard.
 Securely tighten each mattress
platform bracket bolt at this
time.
 Fig 9. is how your crib should
look.
Figure 7.
Attach the footboard.
Figure 8.
Allen wrench
2” (1/4”x 20 thread) Connector bolt
Metal Locator Pin
Figure 9.
Assembled Crib.
Figure 7a.
Attach the footboard using
metal locator pin.
Footboard
Footboard

10
Final Step in Crib Assembly
Step 5: (The final and most important) Checklist.
 Inspect the crib once again to assure that all bolts are tight and that no hardware is missing. (if you
have missing hardware, contact Stanley Furniture immediately for replacement and do not use the
crib until the new hardware arrives).
 Do not place the crib near a window where the child may have access to window coverings, cords or
draperies as these articles pose a strangulation hazard.
 Replace the instructions in the holder provided. KEEP THE INSTRUCTIONS WITH THE CRIB.
 Install the crib mattress.
 Follow all the warnings on the use of this crib and all products in the crib.
 CAUTION: Any mattress used in this crib must be at least 27-1/4” by 51-5/8”
with a thickness of no less than 4 inches and not exceeding 6 inches.

11
Cleaning:
Mix together a mild solution of gentle dishwashing liquid and water, apply to the crib sur-
face using a soft clean cloth lightly dampened in the solution. Rinse with clear water
again using a soft clean cloth, then dry all surfaces thoroughly with a dry cloth. NO
ABRASIVE CLEANERS, SCOURING PADS, STEEL WOOL OR COURSE RAGS
SHOULD BE USED TO CLEAN THIS FINE FURNITURE.
Storage:
A permanent storage pouch is attached to the mattress platform for the storage of the as-
sembly instructions. After completing the assembly process, you are advised to read and
be aware of all WARNINGS, CAUTIONS, CLEANING, STORAGE, USE AND
MAINTENANCE notices contained in these instructions. Do not place excess hardware
in the storage pouch as it could present a danger to a child if retrieved and could also
damage the mattress. When storing the crib, use CAUTION as temperature changes and
humidity could be harmful to the crib. It is recommended that the crib be stored in a
temperature controlled environment.
Periodic Maintenance:
1. Periodically check to make sure all bolts and connections are fastened securely.
2. If you are missing a part or need a replacement part, do not substitute parts. Ask your
dealer for replacement parts or contact Customer Service at [phone].
3. The crib allows for 3 mattress heights. Move to the low position when the child can
pull up to a standing position. When the child reaches a height of 35” or can climb out
of the crib you should place the child in a youth or regular bed.
4. Save these instructions in the event you disassemble the crib and need to reassemble it.
These instructions will also be useful in identifying replacement parts if needed at a
future date.

12
Lowering the Spring Mattress
Lower Position
Steps to lower the mattress:
 Loosen the (4) 2” (1/4”x20 thread) bolts attaching the footboar d as shown Fig. 10a.
 Loosen the (4) 3/4” (1/4”x20 thread) bolts attaching the Mattr ess Platfor m.
 Remove the crib footboard at this time.
 Lower the crib mattress platform to the desired setting.
 Follow Steps 3 and 4 on Pages 8, and 9 to reassemble the crib.
 Figure 12 is how your Crib should look.
Figure 11.
Enlarged view of Lowering the Mattress.
3/4” (1/4”x20 thread) Connector bolt
Figure 10a
Enlarged view of Footboard removal.
Allen wrench
2” (1/4”x20 thread) Connector bolt
Footboard
Higher Position
Figure 10.
Removing footboard from the Crib.
Figure 12.
Assembled mattress platform in low position.
Allen Wrench
Mattress Platform

13
Toddler Bed Conversion Kit is available as an
option to convert the Built to Grow Crib to a tod-
dler bed. Contact your Stanley Furniture dealer
to purchase this item.
Accessories and Options
Full Size Bed Conversion With Metal Bed
Frame is available as an option using a metal
bed frame. Contact your Stanley Furniture deal-
er to purchase this item.
Full Size Bed Conversion With Footboard is
available as an option to convert the Built to
Grow Crib to a full size bed. Contact your Stan-
ley Furniture dealer to purchase this item.

14
Step 1: Disassemble the crib or toddler/day bed.
 Using the wrench provided remove the components in the following order:
 Loosen footboard bolts & mattress platform bolts.
 Remove the footboard
 Remove the mattress platform
 Remove the crib ends from the crib headboard
 Keep and store all the hardware for future assembly of the crib. Store the crib components in a safe
dry place to prevent damage.
Step 2: Attach the side rails and slat roll.
 The side rails can be installed in two positions. The lower position is recommended for transition
from the crib to a child’s first full size bed. The bed side rails can be moved to the upper position
after your child adapts to the transition. Under bed storage options can be used with the bed rails
positioned in the upper location. Contact your Stone & Leigh dealer for more information on availa-
ble options.
 Install the rails to the headboard and footboard as shown in figure 16.
 Insert (4) 3/4” bolts & (4) caps in the headboard to cover the crib assembly holes. Tighten with the
wrench provided. See Figure 15.
 Install the slat roll using the screws and instructions provided with the slat roll for proper installa-
tion.
Converting to a Full Size Bed
Headboard
Figure 15.
See Figure 15.
Cap
Allen Wrench
Connector Bolt
3/4” (1/4” x 20 thread)
1/4” Threaded Rod
Curve Washer
Nut
Wrench
Headboard
See Figure 16.

15
Stanley Furniture Company
200 North Hamilton St
No. 200
High Point, NC 27260
For parts, contact your Stanley Furniture dealer.
For additional consumer information call our Customer Service Department at:
1-[phone]Mon.-Fri., 8am-5pm Eastern Standard Time
091215

Número de modelo:
CUNA BTG 584-x3-50
CUNA BTG 536-x3-50
CUNA BTG 537-x3-50
CUNA BTG 560-x3-50
CUNA BTG 575-x3-50
Su bebé dormirá de manera segura en esta cuna de Stanley Furniture. El montaje
correcto garantizará que se hayan realizado todos los esfuerzos posibles para dise-
ñar esta cuna teniendo en cuenta la seguridad de su hijo. Cuenta con certificación
de cumplimiento con las normas de seguridad establecidas por la ASTM y por la
CPSC (Comisión de Seguridad de Productos del Consumidor).
Gracias por comprar una cuna de Stanley Furniture. Si descubre que falta alguna
pieza o si alguna de estas se encuentra defectuosa, comuníquese con su vendedor
minorista de Stanley Furniture para obtener ayuda.
Instrucciones de montaje para la cuna Built to Grow
IMPORTANTE - CONSERVE PARA REFERENCIAS FUTURAS - LEA ATENTAMENTE

2
! ADVERTENCIA: 
 

 


 

 

 



 

 


 





 


 
 
 

 

 

 
 

 
 

 



 
 

3
Las ilustraciones de las cunas son genéricas. La cuna que ha comprado puede diferir de las
que aparecen ilustradas; sin embargo, todas se montan de la misma manera.
Identificar las piezas
Extremo izquierdo
de la cuna
Plataforma del colchón de
resortes
Extremo derecho de
la cuna
Cabecera Pie de la cuna

4
8 pernos conectores
de 2 in (roscas de 1/4 in x 20)
Identificar las piezas
Identificar las piezas incluidas mediante el uso de las ilustraciones a
continuación
2 llaves Allen
8 pernos conectores de 3/4 in
(rosca de 1/4 in x 20)
2 barras de metal
4 soportes de metal
con barras roscadas
1 Llave inglesa 4 casquillos
8 tuercas ciegas
8 arandelas
de seguridad

5
Montaje de la cuna
NOTA: Lea todas las instrucciones antes de montar la cuna. GUARDE LAS INSTRUC-
CIONES PARA REFERENCIAS FUTURAS.
Junto a la plataforma del colchón, se encuentra una funda para guardar el manual de in-
strucciones. Luego de completar el montaje, guarde el manual de instrucciones en la funda
para referencias futuras.
La cuna cumple con las normas para la seguridad de productos establecidas por la ASTM
y por la CPSC (Comisión de Seguridad de Productos del Consumidor). Siga las indica-
ciones que se encuentran en este manual para el montaje, uso y mantenimiento de la cuna.
Tome nota de las recomendaciones a continuación:
 No se recomiendan las herramientas eléctricas para el montaje.
 Asegúrese de tener suficiente espacio para trabajar.
 Debido al tamaño de esta cama, debe montarse en el espacio que ocupará.
 Se necesitarán dos personas para completar el montaje.
 Despliegue todas las piezas y asegúrese de que lo pernos con la longitud adecuada se
utilicen en las áreas designadas.
 No sustituya ninguna pieza. Si alguno de los artículos está dañado o no está incluido en
el paquete, contáctese con Stanley Furniture inmediatamente para su sustitución. In-
speccione todos los componentes y las piezas antes de comenzar el proceso de montaje.
 Asegúrese de que los sujetadores estén ajustados.
 Ante todo, tómese su tiempo y lea las instrucciones cuidadosamente.
Herramientas necesarias para el montaje:
 Llaves Allen (proporcionadas)
 Lave de tubo (proporcionada)