Steamfast SF-680 User manual
Digital Fabric Steam Press Owner’s Guide
Guía Del Propietario De La Plancha A Vapor Digital Para Telas
Guide D’utilisation – Presse À Vapeur Numérique Pour Tissu
MODEL SF-680
MODELO SF-680
MODÉLE SF-680
ENGLISH p. 2
ESPAÑOL p. 14
FRANÇAIS p. 26
2 |ENGLISH
IMPORTANT SAFETY INSTRUCTIONS
This owner's guide and any additional inserts are considered part of the product. They contain
important information about safety, use, and disposal. Before using the product, please
familiarize yourself with all operating and safety instructions. Please keep all documents for
future reference and pass these documents on, together with the product, to any future owner.
See our website for the most current version of this owner’s guide.
INTENDED USE: This product is intended to be used indoors for the steaming of garments
and other fabrics in the United States and/or Canada. This product is not intended for
commercial or industrial uses. The manufacturer assumes no responsibility for damage or injury
due to unauthorized use or product modification. Failure to follow these directions will void the
product warranty.
WARNING: Risk to Children and Impaired PersonsSupervision is required during the
installation, operation, cleaning and maintenance of this product by children under age 12 and
anyone with reduced physical, sensory or mental capabilities. Children should be supervised to
ensure that they do not play with the appliance, its parts and packaging material.
Directions to reduce risk of fire, electrical shock, and injury:
1. Read all instructions before use.
2. Use caution when handling this steam unit. Burns could occur from touching hot metal
parts, hot water, or steam. Use special care to avoid contact with hot water when turning the
product upside down to empty the reservoir.
3. To reduce the risk of contact with hot water, test whether steam is ready before each use
while carefully holding the product away from your body. If no steam appears, wait a few
more minutes and test again. Do not look into the appliance, use your hands or other
objects to check for steam.
4. Do not leave appliance unattended while connected.
5. To reduce the risk of electric shock, do not immerse the appliance in water or other liquids.
6. Always disconnect appliance from electrical outlet when filling with water or emptying, and
when not in use.
7. Do not allow cord to touch hot surfaces. Let appliance cool completely before putting away.
Loop cord loosely around appliance when storing.
8. Never yank cord to disconnect from outlet. Instead, grasp just the plug and pull
to disconnect.
9. Do not operate appliance with a damaged cord, or if the appliance has been dropped or
damaged. To reduce the risk of electric shock, do not disassemble or attempt to repair
the appliance. All repairs must be performed by a qualified service professional. Incorrect
reassembly or repair could cause a risk of fire, electric shock, or injury when the appliance
is used.
10. A loose fit between wall outlet (receptacle) and plug may cause overheating and distortion
of the plug. Discontinue use of the product in this outlet. Contact a qualified electrician to
replace loose or worn outlets.
11. To reduce the likelihood of circuit overload, do not operate another high wattage
appliance on the same circuit.
12. If an extension cord is absolutely necessary, a 15 amp rated cord should be used. Cords
ENGLISH |3
Questions or comments?
•steamfast.com
•1-800-711-6617
Speak your mind! We invite you to review this product online:
steamfast.com/reviews
rated for less amperage may overheat. Care should be taken to arrange the cord so that
the cord cannot be pulled or tripped over.
13. This GARMENT STEAMER is for use with a 120 volt electrical outlet. The cord has a plug
as shown at A in Figure 65.1. An adapter, as shown at C, can be used to connect three-
blade grounding-type plugs to two-slot receptacles (it is not included with your product).
The green grounding lug extending from the adapter must be connected to a permanent
ground such as a properly grounded outlet box. An adapter should not be used if a
three-slot grounded receptacle is available. *NOTE: A TWO-PRONG ADAPTOR IS NOT
INCLUDED WITH THIS PRODUCT.
WARNING: Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
FCC CONSUMER ADVISEMENT: This equipment may generate, use and/or radiate radio
frequency energy that may cause harmful interference to radio communications. If this
equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to contact Steamfast
Consumer Service at 1-800-711-6617.
SAVE THESE INSTRUCTIONS
Figure 65.1
4 |ENGLISH
The following features and accessories are included with your steam press. Carefully inspect
packaging material as some parts are shipped inside Styrofoam packaging. To obtain possible
missing parts, refer to the Consumer Support section on page 10 of this manual.
UNIT FEATURES
& ACCESSORIES
Handle
Steam Burst Buttons
Water Reservoir Cap
Water Reservoir
Ironing Board
Pressing Plate
Pressing Plate Cover
On/Off Switch
Locking Knob
Power Indicator Light (Red)
Pressing Indicator Light (Green)
Steam Burst Ready Indicator
Light (Yellow)
Temperature Control Buttons
Cord Storage Compartment
Measuring Cup
Spray Bottle
Pressing Cushion
1
2
3A
3b
4
5
6
7
8
9
10
11
12
13
14
15
16
Product Information
ENGLISH |5
• The Handle (1) is used to safely lift up and lower the Pressing Plate, and to carry the unit.
• The Steam Burst Buttons (2) are located on either side of the Handle, and produce a powerful
burst of steam when pressed.
• The Water Reservoir Cap (3a) covers the Water Reservoir fill hole and must be removed in
order to fill the Water Reservoir with distilled water.
• The Water Reservoir (3b) is the tank in which distilled water is stored for use by the unit.
There must be water in the Water Reservoir in order for the units steam burst function to
work correctly.
• The Ironing Board (4) is the padded surface onto which fabric is placed during pressing. The
fabric cover is removable and can be washed.
• The Pressing Plate (5) is the temperature-controlled teflon surface that heats and
presses fabric.
• The Pressing Plate Cover (6) is the durable cover that protects the Pressing Plate.
• The On/Off Switch (7) activates and deactivates the unit.
• The Locking Knob (8) locks the Pressing Plate and Ironing Board together. This allows for
carrying and storage of the unit.
• The Power Indicator Light (Red) (9) illuminates when the On/Off Switch is set to the “On”
position, providing you with a clear visual indication that the unit is powered on.
• The Pressing Indicator Light (Green) (10) illuminates while the unit is heating to the selected
temperature. When deactivated, this indicates that you are ready to press.
• The Steam Burst Ready Indicator Light (Yellow) (11) illuminates once the unit is ready to
produce bursts of steam, providing you with a clear visual indication that you can begin using
the Steam Burst Buttons.
• The Temperature Control Buttons (12) are pushed to select a desired temperature. Press the
right arrow button to cycle right through the list of fabric choices above the buttons, and
press the left arrow button to cycle left through the list of fabric choices above the buttons.
• The Cord Storage Compartment (13) provides a convenient and easily accessible place to
store the power cord.
• The Measuring Cup (14) is designed to assist you in easily filling the Water Reservoir with
distilled water.
• The Spray Bottle (15) allows you to moisten fabrics before pressing, which helps to make the
pressing process easier and more effective in certain instances.
• The Pressing Cushion (16) is a fabric-covered pad used for pressing gathered or contoured
areas such as sleeves, darts, or yokes.
6 |ENGLISH
FILLING WATER RESERVOIR
1. Place Digital Fabric Steam Press on a flat, level surface.
2. Turn Locking Knob to “Unlock” position to unlock Pressing Plate.
3. Lift up Pressing Plate using Handle. It will automatically stay in lifted position.
4. Pull Water Reservoir out. Note that Water Reservoir cannot be completely removed from
unit; do not attempt to force it free.
5. Remove Water Reservoir Cap to expose Water Reservoir fill hole.
6. Using Measuring Cup (included), fill Water Reservoir up to the MAX (300 ml.) line with
distilled water.
7. Replace Water Reservoir Cap and push filled Water Reservoir back into main unit.
OPERATING DIGITAL FABRIC STEAM PRESS
1. With Pressing Plate in lifted position, plug power cord into
electrical outlet, and set On/Off Switch to “On” position
(FIGURE 1).
2. Identify type of fabric you are going to press, and select
corresponding temperature setting using Temperature Control
Buttons. NOTE: that it is best to start with the most delicate
fabrics first, as higher levels of heat will cause damage to
Nylon and Silk. Pressing Indicator Light will illuminate.
3. A few minutes of heating time will be required to reach selected
temperature. Once Pressing Plate is heated, Pressing Indicator
Light will deactivate. You are now ready to begin pressing.
4. Lay fabric flat on Ironing Board.
5. If pressing wool, you may choose to spray with a burst of steam.
This function is available once Steam Burst Ready Indicator Light illuminates.
NOTE: Do not activate burst of steam with unit completely closed, as this may damage unit.
Best results are obtained if Pressing Plate is held open approximately 3 in. (75 mm.) above
Ironing Board before pressing Steam Burst Button. For safety reasons, do not hold Pressing
Plate open more than 3 in. (75 mm.) when using steam burst function. Only use burst of steam
for 2-3 seconds for best results. If press is left on fabric for more than 10 seconds, it could
result in damage to the fabric.
NOTE: When using the nylon or silk settings, no steam is produced.
6. To press, lower Pressing Plate gently onto fabric and Ironing Board. Hold there for 8-10
seconds, then lift up Pressing Plate. Repeat until you have achieved desired crease and
smoothness. See page 7 of this manual for more specific pressing tips.
7. Once pressing tasks are complete, immediately set On/Off Switch to “Off” (O) position
and unplug grounded power cord from electrical outlet. Refer to page 8 of this manual for
further information about cleaning and storage of Digital Fabric Steam Press.
FIGURE 1
Using Your
Digital Fabric Steam Press
ENGLISH |7
STEAM BURST
1. Hold Pressing Plate approximately 3 in. (75 mm.) above Ironing Board.
2.Press Steam Burst Button to release a burst of steam onto fabric for 2-3 seconds.
3.Lower Pressing Plate onto fabric for 8-10 seconds, then raise once again. Note: If press is
left on fabric for more than 10 seconds, it could result in damage to fabric.
4.Repeat steps 1-3 above until fabric is smooth and wrinkle-free.
PRESSING AND STEAMING TIPS
Pressing Shirts and Blouses
1. Place shoulder yoke on Ironing Board first and press.
2. Next, place sleeves onto Ironing Board with fold parallel to long seam and press.
3. Place cuffs onto end of Ironing Board and press.
4. Place bottom of shirt behind Ironing Board. Begin by pressing the side with pocket. Pull
shirt towards you as you press each section.
5. Finish by pressing collar of shirt.
Pressing Pants
1. Place Pressing Cushion under waistband and press, repositioning waistband until
completely pressed.
2. To press inseam, place Pressing Cushion under area to be pressed.
3. Place pleated area on Ironing Board. Carefully fold pleats and press.
4. Embroidery should be placed face down on Ironing Board to reduce wear and prevent
damage to delicate areas.
Other Techniques
• Placing Pressing Cushion between fabric and Pressing Plate may help with delicate fabrics.
• Buttons and zippers: if you have older types of buttons or zippers, you may need to take
special care to avoid melting. In order to do so, place garment face-down and cover with
Pressing Cushion before pressing.
• Spray Bottle may be used to spray fabrics lightly. This will further help to remove
exceptionally stubborn wrinkles.
• Place a damp cloth over fabric before pressing, which will help with stubborn wrinkles or
heavy gauge fabrics.
• To press large pieces of fabric, place entire piece behind Ironing Board. Pull fabric towards
you, over Ironing Board, and lower Pressing Plate. Press fabric in sections until completed.
8 |ENGLISH
AUTO SHUT-OFF
The Auto Shut-Off feature of the Digital Fabric Steam Press includes both an Auto Shut-Off
and an Auto Wake-Up. These multiple function safety features deactivate electrical power
to the heater when the Pressing Plate has been left in closed position against the Ironing
Board for more than 10 seconds. Heater deactivation is signaled by a beeping sound. Heater
functionality is restored when the Pressing Plate is lifted back up.
Power to the heater will also be cut if the Pressing Plate is left in the lifted position without use
for approximately 15 minutes (signaled by a continuous beeping sound). The heating ability of
the unit can be restored either by resetting the On/Off Switch,or by pressing the Temperature
Control Buttons.
IMPORTANT: Auto Shut-Off does not mean that power to the unit is totally cut off.
Power is always on, and the Power Indicator Light will remain illuminated until On/Off
Switch is set to “Off” position (FIGURE 1, page 6).
CLEANING THE DIGITAL FABRIC STEAM PRESS
1. Fill Water Reservoir with water using procedure on page 6 of this manual.
2. Place Pressing Cushion in the middle of Ironing Board.
3. Place a clean towel over Pressing Cushion and Ironing Board.
4. Set Temperature Control Buttons to the highest setting (LINEN).
5. When Steam Burst Ready Indicator Light illuminates, lower Pressing Plate onto
Pressing Cushion.
6. Press Steam Burst Button six times.
7. Allow Pressing Plate to cool.
8. Clean Pressing Plate with damp cloth. Do not use abrasive materials, as this may damage
Pressing Plate.
9. Ironing Board fabric cover is removable for cleaning. Hand wash only with mild detergent.
PROPER STORAGE
1. Once pressing is complete, immediately turn unit off and unplug power cord from
electrical outlet.
2. Allow unit to cool completely (at least 30 minutes).
3. Lower Pressing Plate down, and turn Locking Knob to “Lock” position.
4. Wrap up power cord and place in Cord Storage Compartment.
5. Store all accessories safely away, preferably near Digital Fabric Steam Press.
6. Store Digital Fabric Steam Press in a cool, dry place.
Storage & Care
ENGLISH |9
PROBLEM
Unit fails to heat up. Power
Indicator Light DOES
NOT illuminate.
Steam Burst output is weak
or intermittent.
Unit heats up, but fails to steam.
Power Indicator Light
does illuminate.
(NOTE: Always allow proper time
for unit to heat up and begin
producing steam.)
POSSIBLE CAUSE
Unit is not plugged in.
Water Tank is empty.
Auto Shut-Off has engaged.
Household circuit breaker / ground
fault interrupter has tripped or
blown a fuse.
Unit is damaged or malfunctioning.
Pressing Plate needs to be cleaned.
SOLUTION
Plug power cord into
electrical outlet.
Refer to Filling Water Reservoir
procedure on Page 6.
Refer to Auto Shut-Off section
on page 8 of this manual for
proper procedure.
Reset circuit breaker / ground
fault interrupter, or replace fuse.
If you need assistance, contact a
licensed electrician.
Immediately cease usage
and contact our Customer
Support department.
Refer to Cleaning the Digital Fabric
Steam Press section on page 8 of
this manual for proper procedure.
Troubleshooting
10 |ENGLISH
CONSUMER SERVICES
For problems with your Digital Fabric Steam Press, please refer to the troubleshooting guide
located on Page 9 of this manual. Additional inquiries should be directed to our consumer
support services through our Web site, www.steamfast.com.
If you do not have internet access, you may also contact our Consumer Service Department by
telephone, at 1-800-711-6617.
NOTE: In order for our Consumer Service representatives to help you as quickly and
efficiently as possible, please have the following information ready before calling:
• Purchase information (where and when you purchased this product)
• Copy of purchase receipt / proof of purchase
• Product serial number (located on electrical specification label on back of unit)
For information regarding your 1 year limited warranty, refer to Page 12 of this manual.
PRODUCT SPECIFICATIONS
SF-680
120V
1350W
11.3A
10 OZ. (300 ML.)
21.36 LBS. (9.69 KG.)
25.59” (65.0 CM.) x 21.38” (54.3 CM.) x 8.19” (20.8 CM.)
6.6’ (201.0 CM.)
MODEL
VOLTAGE
WATTAGE
AMPERAGE
WATER CAPACITY
UNIT WEIGHT
UNIT DIMENSIONS
POWER CORD LENGTH
Product Support
ENGLISH |11
SPRAY BOTTLE
A660-005
ACCESSORIES & PARTS
When ordering accessories and parts for your Digital Fabric Steam Press, you may refer to the
part numbers below. Replacement parts may be ordered through our Web site:
www.steamfast.com
You may also contact Consumer Service directly:
PRESSING CUSHION
A660-003
FUNNEL CUP
A660-006
12 |ENGLISH
1-YEAR LIMITED WARRANTY
What is covered
Steamfast, a division of Vornado Air, LLC (“Steamfast”). Subject to the terms and conditions of
this 1-Year Limited Warranty (“Warranty”) as set forth below, Steamfast warrants to the original
consumer or purchaser (“Buyer”) that this Steamfast®-branded steam product, excluding
all accessories and attachments, (the “Product”) is to be free from defects in material and
workmanship for a period of one (1) year from the date of purchase when used and maintained in
accordance with the Owner’s Guide (the “Warranty Period”). In the event Buyer notifies Steamfast
of a defect in the Product within the Warranty Period, Steamfast will replace the Product and/
or defective component parts, as applicable and necessary. Any such replacement will be made
at no charge to Buyer for parts or labor, provided that Buyer shall be responsible for all shipping
and transportation costs associated with returning the Product to Steamfast for inspection and
covered replacement.
What is not covered
This Warranty shall not be applicable to damage or loss caused in whole or in part by:
• Repairs, modifications or alterations to the Product by anyone other than Steamfast.
• Use or operation of the Product outside the permitted or intended uses described by
Steamfast in the Owner’s Guide, or other careless operation, handling, misuse, or abuse of
the Product.
• Lack of proper maintenance or timely cleaning of the Product as specified in the
Owner’s Guide.
• Use of the Product other than for normal household purposes.
• Normal wear and tear.
• Used consumable parts, accessories and attachments, including, but not limited to, brushes,
hangers, scrub pads and mop pads.
• Use of parts and accessories other than those produced or recommended by Steamfast.
• Cosmetic damage, such as scratches, nicks and dents.
• Damage caused by accident, water, flood, fire or other acts of nature or external causes.
Warranty limitations and exclusions
• NO OTHER EXPRESS WARRANTY IS GIVEN BY STEAMFAST TO BUYER AND NO
REPRESENTATIVE HAS THE AUTHORITY TO MAKE REPRESENTATIONS OTHER THAN THOSE
PROVIDED HEREIN.
• THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE
HEREOF AND ALL IMPLIED WARRANTIES, SPECIFICALLY THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY EXPRESSLY
LIMITED TO THE DURATION OF THE WARRANTY PERIOD, UNLESS A SHORTER PERIOD IS
PERMITTED BY LAW.
• STEAMFAST’S REPLACEMENT OF THE PRODUCT IS THE EXCLUSIVE REMEDY. UNDER NO
CIRCUMSTANCES SHALL STEAMFAST BE LIABLE TO BUYER OR ANY OTHER PERSON FOR
ANY INCIDENTAL, SPECIAL, CONSEQUENTIAL, OR OTHER DAMAGES, EVEN IF STEAMFAST
HAS BEEN ADVISED OF OR COULD REASONABLY FORESEE THE POSSIBILITY OF SUCH
DAMAGES, INCLUDING, BUT NOT LIMITED TO, LOSS OF PROFITS OR DAMAGE, WHETHER
RISING OUT OF BREACH OF WARRANTY, BREACH OF CONTRACT OR UNDER ANY OTHER
THEORY OF LAW.
Warranty Information
ENGLISH |13
• THIS WARRANTY GIVES BUYER SPECIFIC LEGAL RIGHTS. BUYER MAY ALSO HAVE OTHER
RIGHTS WHICH VARY FROM STATE-TO-STATE. SOME STATES DO NOT ALLOW THE
EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, AND SOME
STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO
THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO BUYER.
How do you register the Warranty
Buyer must complete an application to register this Warranty within sixty (60) days following date
of purchase. Buyer may either visit Steamfast’s website at steamfast.com and complete an online
application or mail a completed application to Steamfast. Failure to register this Warranty within
sixty (60) days following date of purchase will render this Warranty null and void.
Warranty service
Return Authorization (“RA”) form. Include the Product model number and serial number, as well
as Buyer’s name, address, city, state, zip code and phone number when contacting Steamfast
for warranty service. Buyer may be required to provide the original sales receipt for purposes of
verifying date of purchase. After receiving the RA form, the Product must be shipped, postage
prepaid by Buyer, to:
Steamfast
Attn: Warranty & Repair
415 E. 13th Street
Andover, KS 67002
To assure proper handling, packages must be clearly marked with the RA number. Packages not
clearly marked with the RA number may be refused at the receiving dock.
Important: After receiving return authorization, carefully pack the Product to avoid damage in
shipping. Damage in shipping is not covered by the Warranty and shall be the sole responsibility
of Buyer. Damage or loss not covered by this Warranty or occurring outside the Warranty Period
will require a fee to cover the cost of handling and shipping. All such fees and costs shall be the
sole responsibility of Buyer.
Please allow at least 1-2 weeks for return of the Product after it is received by Steamfast. For ease
of recordkeeping, it is recommended that Buyer staple or attached the original sales receipt to
this Owner’s Guide and record the Product serial number (located on the Product specifications
decal) here:
________________________________________________
© 2016 Vornado Air, LLC • Andover, KS 67002
Specifications subject to change without notice.
Steamfast® is a trademark owned by Vornado Air, LLC.
Manufactured in China.
Steamfast Consumer Service
review this product online
evalúe este producto en línea
évaluer ce produit en ligne
www.steamfast.com/reviews
Steamfast
415 East 13th, Andover, KS 67002
T680-005 R-, V01
Other manuals for SF-680
2
Table of contents
