STI solar Chatsworth Two Tier SolarFountain User manual

© 2005 STI Group Inc.
For further information, including parts, warranty repair
or general inquiries, please contact the STI Group Inc. at:
Intellectual Property
This product is covered by one or more international and US patents pending.
All logos, designs and colors are copyrights and trademarks of STI Group Inc.
All rights reserved 2005
Please register your product online at our website:
www.stigroupinc.com/registration
USA Corporate Office
Tel: [phone]
Address: 1203 Loyola Drive •Libertyville, IL 60048
Email: [email protected]
Website: www.stigroupinc.com
STI Group Inc. Locations:
CHICAGO LOS ANGELES ATLANTA SHENZHEN, CHINA
Chatsworth
Two Tier Solar
Fountain
Solar powered water fountain
operates in direct sunlight
05.10.208 Chatsworth manual 10/5/05 1:50 PM Page 8

CHATSWORTH TWO TIER SOLAR FOUNTAIN
Instruction Manual (ENGLISH)
CONTENTS
1. Introduction
2. Security instructions
3. Overview
4. Components
5. Assembling & using your product
6. Cleaning and maintenance
7. Troubleshooting
8. Technical data
9. Spare parts
10. Two year warranty
These instructions relate ONLY to the Chatsworth Solar
Fountain and contain important information for using the
product for the first time. Please keep these instructions
for later reference. They should always accompany the
product in the event of transfer to a new user.
1. INTRODUCTION
Thank you for purchasing the Chatsworth Solar Tier Fountain.
You have purchased a product that complies with the latest and
most up-to-date solar technology available.
This product complies with the European and National Standards.
The relevant certificates of conformity are held by STI Group.
To preserve these standards and in order to maintain safety you
should adhere to the instructions for use detailed in this manual.
2. SECURITY INSTRUCTIONS
In the event of any problems arising or damage occurring as a
result of misuse the manufacturers warranty will be deemed
cancelled. The manufacturer is not responsible for any claims or
damages arising from the misuse of this product.
For safety reasons and in order to maintain standards (CE) you
are prohibited from altering or changing any component in the
Chatsworth Solar Fountain.
Please follow the instructions very carefully.
For commercial applications due care and attention must be paid
to the Health and Safety Standards in your jurisdiction.
05.10.208 Chatsworth manual 10/5/05 1:50 PM Page 2

CHATSWORTH TWO TIER SOLAR FOUNTAIN
Instruction Manual (ENGLISH)
CHATSWORTH TWO TIER SOLAR FOUNTAIN
Instruction Manual (ENGLISH)
5. ASSEMBLING AND
USING YOUR PRODUCT
Please note:
There will be water splashes when the product is in use. Make
sure that the surface on which you are placing the two tier
fountain will be not affected.
1. Unpack all components carefully.
2. Screw the main basin into the pedestal stand.
3. Place the top tier with solar module and pump unit on the
main basin and align the notch on the top tier unit with the
notch in the basin. Fill large basin with water.
IMPORTANT: For maximum performance we recommend the
use of clean filtered, distilled or rain water. The use of “hard”
well water will severely impact the performance and longevity of
the solar module and pump unit. Scale build-up from “hard”
water on the panel and pump are not covered under warranty.
The Chatsworth Solar Fountain is now ready to operate.
Please Note:
On first use, there may be air in the pump. It can take up to 5
minutes until the air escapes. You can submerge the Chatsworth
Fountain below the water surface to help the air escape.
PANEL PERFORMANCE
MIN. MIN.
MAX.
CONDITION FUNCTIONALITY
SEASONAL FUNCTIONALITY
OPTIMUM LOW
LOW MEDIUM
GOOD MEDIUM
WINTER SPRING
AUTUMNSUMMER
1Top tier section with attached solar module and pump unit
2Main basin (bowl)
3Pedestal base
1
3
2
Screw the basin into the pedestal
Turn upside down on a soft
surface and remove pump unit
Insert the top tier which
contains the solar panel unit
Ensure the underwater connector
is secure and water tight
4. COMPONENTS
3. OVERVIEW
The Chatsworth Solar Fountain has been designed for outdoor
use. The pump derives its power directly from the integral solar
module. In order for the pump to operate, the solar module needs
to be placed in direct sunlight. The performance of the pump
depends on the season and the position of the solar module.
Important: If you are away from home for more than a few
days, remove the top tier unit with the solar module and pump
and store in a safe location. This will prevent the pump from
running dry. The pump must never be operated dry (out of
water). Dry operation permanently damages the pump. Please
top-up the water level in your Chatsworth fountain regularly,
especially in hot weather and you will enjoy it for many years.
6. CLEANING AND MAINTENANCE
If after time the pump starts to lose power or stops working you
should check for the build up of sediment or scale in the bottom
of the pump housing. Carefully take out the first tier, turn it
upside down on a soft surface. Dry the solar pump connector and
disconnect.
Remove the pump from the plastic unit and open the pump
housing at its base. Remove the impeller and remove any dirt or
scale which has built up and close.
Put the unit together in reverse order.
Please note:
Make sure the underwater connector is absolutely dry before you
reconnect it. To ensure the seal remains water-tight you must
twist the solar pump connector plugs together rather than merely
pressing together. The “O” ring should be completely inserted.
The Solar module should only be cleaned with soft cloth and any
mild glass cleaning solution.
05.10.208 Chatsworth manual 10/5/05 1:50 PM Page 4

CHATSWORTH TWO TIER SOLAR FOUNTAIN
Instruction Manual (ENGLISH)
7. TROUBLESHOOTING
Pump does not operate even though the solar module is in
full sunlight.
1. No connection to the solar module - Check the connection.
2. Impeller is blocked or filter/pump housing is dirty -
Clean the pump (remove the impeller)
Pump does operate but there is no water running through
the fountain head.
1. Check for the build up of sediment or scale in the tube
or the filter - Clean the tube and the filter.
2. Check whether the pump cover is attached properly. If the
pump cover is not attached, the pump will not push water
through the fountain.
8. TECHNICAL DATA
Operation voltage: 6.0 V
Solar module: 6.0 V / 1.1 W
Pump performance: max. 55 gph
Cable: 6 in.
Important:
In winter the Chatsworth Fountain must be stored in a dry and
frost-proof environment. The pump must never be operated dry
(out of water). Dry operation permanently damages the pump.
9. SPARE PARTS
1. Solar module and pump: Item No. 3100-MOD
2. Pump unit: Item No. SBP-600
10. 2 YEAR WARRANTY
Please register your product within 7 days at:
www.stigroupinc.com/registration
If within 24 months from the date of purchase this product fails
due to a defect in material or workmanship. STI Group will
replace or repair it free of charge. You will need to provide proof
of purchase and you may need to send in the pump/panel
assembly to the STI Group repair center for warranty.
The warranty does not apply to:
Damage caused by accidents, abuse, poor handling, frost or
normal wear and tear. Products which have been subject to
unauthorized repair or modification.
For further information please contact your nearest service centre
detailed on the last page of this instruction manual.
Remove pump base
Clear impeller
05.10.208 Chatsworth manual 10/5/05 1:50 PM Page 6