Stiga MULTICLIP 46 S SVAN User manual

May 14, 2003
Stiga Multiclip 46 S Svan
11-3603-17
MULTICLIP
MULTICLIP 46 S SVAN
• Cutting time 30 % faster than of equivalent rear bagger.
• No fertilizing needed.
• No grass waste to take care of.
• Half noise level of equivalent rear bagger.
• Stronger and greener lawns.
• No leaves to take care of in the fall.
• Perfect recycling in the sence of the nature.
• Wheels with double ball bearings.
• Self-propelled.
• Honda overhead valve camshaft engine gives 30% less fuel con-
sumption, easy start and smooth running.
• Conforms with the Svan regulations step II (2003) and the Cali-
fornian emission levels step II (2005).
• Less 3 db(A) is equivalent to 50 % noise reduction.

Multiclip 46 S Svan (11-3603-17)
MOTOR
Brand Honda GCV 135 overhead valve camshaft.
Power 4,5 hp, 4-stroke 3,4 kW
Number of revolutions 3000 rpm
FUEL
Type of fuel Leadfree 95
WHEELS
Type of wheels Wheels with double ball bearings
Wheel size Front 190 mm. Rear 190 mm.
Driving Front wheels self-propelled. 4,4 km/h.
CUTTING SYSTEM
Type of cutting system Multiclip
Cutting heights 4 heights, 35 - 65 mm
Cutting width 46 cm
Cutting height adjustment Individual hight adjustment.
VIBRATIONS & NOISE LEVEL
Noise effect 91 dB(A) measured average, new European noise regulation
below 96 db(A) valid from January 2002
CONTROLS
Handlebar Stiga soft OPC-lever and self-propelled lever.
COLOUR & MATERIAL
Material of chassis Sweden steel 2 mm
MEASURES & WEIGHT
Weight 26 kg
Gross weight 29 kg
Package size W*H*L 775x530x505 mm
Units on pallet 6
OTHER FACTS
Owner's Manual 8211-0203-11
EAN bar code 731 332 110 199 2