stilum Ascendo 2 User manual

© stilum GmbH, 56271 Kleinmaischeid • Tel. [phone] • Alle Rechte und Produktmodikationen vorbehalten State: 28.10.2019 p. 1
Mounting instructions for multiplay equipment „ascendo 2 robinia“
Item-No. 517510601
climbing bow
tower
wobble bridge
slide
climbing slant
reman‘s post
climbing wall
Diagram 1: Overall view of play equipment with description of individual elements

© stilum GmbH, 56271 Kleinmaischeid • Tel. [phone] • Alle Rechte und Produktmodikationen vorbehalten State: 28.10.2019 p. 2
Mounting instructions for multiplay equipment „ascendo 2 robinia“
Item-No. 517510601
1. Select the play equipment location in consideration of the required safety
area (see diagram 4: 10000mm x 8000mm).
2. Carry out excavation work for nine foundations as shown in diagram 2 and 3.
After excavation, compress the foundation oor.
Note: The combination equipment is built in on the play level. Pay attention
to items marked „play level” of play equipment!
3. Set up the 2 main concrete foundations, the smaller foundations, the slide
foundation, the climbing bow foundation and the climbing slant foundation
acc. to the dimensions indicated in diagram 3 with central, horizontal rein-
forcement.
4. After a setting period of 10 - 14 days, depending on weather conditions and
foundation size - clean the surface of the foundations and start with the instal-
lation of the combination equipment.
5. Place the two towers as shown in diagram 2 and 3 at the main foundations
and do a rough aligning. Please take care that the connections of the wobble
bridge (shown in diagram 4) are positioned face to face. Rotate the robinia
posts so, that there is a distance of ≤89mm between the stainless steel tube
on the platform and the robinia post, to avoid traps.
Note: Do not screw the base plates onto the foundations yet!
Diagram 2: Foundationplan
Reinforcement plan:
Concrete foundation with reinforcement
Main foundation: BSt 500S
Ever 4 stirrups Ø 8 mm lengthwise and cross
Concrete cover h´= 3 cm
Concrete quality class C 20/25-C25/30
5392
450
850
400
3371
AA
3652
705
1511
3645
4808
4027
1750
600
600
950
275
2871
1846
2938
1750
400
1100
500
1000
500
979
950
1750
561
2063
1996
A-A
6336
5410
OHNE SCHRIFTLICHE ZUSTIMMUNG DER CONRADI+KAISER GMBH DARF DIESE
TECHNISCHE UNTERLAGE WEDER VERVIELFÄLTIGT, NOCH DRITTEN MITGETEILT ODER
ZUGÄNGLICH GEMACHT WERDEN, NOCH IN SONSTIGER WEISE MISSBRÄEUCHLICH VER-
WENDET WERDEN. ZUWIDERHANDLUNGEN WERDEN URHEBERRECHTLICH VERFOLGT.
Oberflächen nach
DIN ISO 1302
Reihe 2
Zul. Abweichung
DIN 2768 - mH
1
ascendo 2A
Benennung
Gepr.
Werkstoff
Blatt
Datum
Projekt
Gez.
Zuschnitt
Zeichnungsnummer
Rev Änderung Datum
1:50
A3
Gewicht
Name
Name
Fundamentplan
1028-00-00
1068.7 Maßstab
Mattheis
02.05.17
Gewerbegebiet Larsheck
56271 Kleinmaischeid
Deutschland
Beton
Concrete
Füllmaterial
Filling
Erde
Ground
Legende
5392
450
850
400
3371
AA
3652
705
1511
3645
4808
4027
1750
600
600
950
275
2871
1846
2938
1750
400
1100
500
1000
500
979
950
1750
561
2063
1996
A-A
6336
5410
OHNE SCHRIFTLICHE ZUSTIMMUNG DER CONRADI+KAISER GMBH DARF DIESE
TECHNISCHE UNTERLAGE WEDER VERVIELFÄLTIGT, NOCH DRITTEN MITGETEILT ODER
ZUGÄNGLICH GEMACHT WERDEN, NOCH IN SONSTIGER WEISE MISSBRÄEUCHLICH VER-
WENDET WERDEN. ZUWIDERHANDLUNGEN WERDEN URHEBERRECHTLICH VERFOLGT.
Oberflächen nach
DIN ISO 1302
Reihe 2
Zul. Abweichung
DIN 2768 - mH
1
ascendo 2A
Benennung
Gepr.
Werkstoff
Blatt
Datum
Projekt
Gez.
Zuschnitt
Zeichnungsnummer
Rev Änderung Datum
1:50
A3
Gewicht
Name
Name
Fundamentplan
1028-00-00
1068.7 Maßstab
Mattheis
02.05.17
Gewerbegebiet Larsheck
56271 Kleinmaischeid
Deutschland
Beton
Concrete
Füllmaterial
Filling
Erde
Ground
Legende

© stilum GmbH, 56271 Kleinmaischeid • Tel. [phone] • Alle Rechte und Produktmodikationen vorbehalten State: 28.10.2019 p. 3
Mounting instructions for multiplay equipment „ascendo 2 robinia“
Item-No. 517510601
Diagram 3: Top view foundations
6. Hook in the wobble bridge as shown in diagram 5a and screw it
with the shackles included in the delivery.
7. Place the slide at the shafts and x it with the screws acc. diagram
5d.
8. Place the climbing slant at the shafts and x it with the screws and
the adapter for the pipes which are included in the delivery (dia-
gram 5b).
9. Connect the climbing bow and the two reman‘s posts according to
diagram 5a and 5c at the adapters and screw it.
10. Align the whole play equipment once more at the foundation and
take care that every base plate is positioned in the center of the
foundation.
11. Drill holes into all foundations and screw the play equipment into
the foundations with the included heavy-duty dowels.
12. Fill up and compress the holes between the foundation and the
foundation hole with the excavation.
13. Seal the foundation with the safety cover required for the height of
fall indicated acc. to EN 1176-1.
Critical drop height: 1700 mm.
Recommended surface material: sand, wood chip, gravel, synth.
fall protection.
14. Do not allow children to use the equipment before the installation
has been nished.
15. After 3 months, check the screws at the joints and retighten them if
necessary.
5392
450
850
400
3371
AA
3652
705
1511
3645
4808
4027
1750
600
600
950
275
2871
1846
2938
1750
400
1100
500
1000
500
979
950
1750
561
2063
1996
A-A
6336
5410
OHNE SCHRIFTLICHE ZUSTIMMUNG DER CONRADI+KAISER GMBH DARF DIESE
TECHNISCHE UNTERLAGE WEDER VERVIELFÄLTIGT, NOCH DRITTEN MITGETEILT ODER
ZUGÄNGLICH GEMACHT WERDEN, NOCH IN SONSTIGER WEISE MISSBRÄEUCHLICH VER-
WENDET WERDEN. ZUWIDERHANDLUNGEN WERDEN URHEBERRECHTLICH VERFOLGT.
Oberflächen nach
DIN ISO 1302
Reihe 2
Zul. Abweichung
DIN 2768 - mH
1
ascendo 2A
Benennung
Gepr.
Werkstoff
Blatt
Datum
Projekt
Gez.
Zuschnitt
Zeichnungsnummer
Rev Änderung Datum
1:50
A3
Gewicht
Name
Name
Fundamentplan
1028-00-00
1068.7 Maßstab
Mattheis
02.05.17
Gewerbegebiet Larsheck
56271 Kleinmaischeid
Deutschland
Beton
Concrete
Füllmaterial
Filling
Erde
Ground
Legende

© stilum GmbH, 56271 Kleinmaischeid • Tel. [phone] • Alle Rechte und Produktmodikationen vorbehalten State: 28.10.2019 p. 4
Mounting instructions for multiplay equipment „ascendo 2 robinia“
Item-No. 517510601
Diagram 4: Minmum space
Attention: If the play equipment has been incompletely installed or partly
dismantled when carrying out maintenance and repair work, this may lead
to particular risks of injury for the user. For this reason, make clearly visible
that the equipment shall not be used in such cases.
STAINLESS STEEL
NOTE: Play equipment, which contain components made of stainless steel
should not come with „normal“ steel parts in contact. Those steel parts
may rub off and leave small steel particles in combination with moisture
brown rust stains.
MAINTENANCE: If such corrosion occur on stainless steel parts, they are
ne to remove with an abrasive (240 grit).
Please take care when transporting and setting up the fact that the compo-
nents are made of stainless steel with no „normal“ steel parts in contact.
R
1500
R
1500
R
1500
1500
10000
2000
3000
4000
8000
OHNE SCHRIFTLICHE ZUSTIMMUNG DER CONRADI+KAISER GMBH DARF DIESE
TECHNISCHE UNTERLAGE WEDER VERVIELFÄLTIGT, NOCH DRITTEN MITGETEILT ODER
ZUGÄNGLICH GEMACHT WERDEN, NOCH IN SONSTIGER WEISE MISSBRÄEUCHLICH VER-
WENDET WERDEN. ZUWIDERHANDLUNGEN WERDEN URHEBERRECHTLICH VERFOLGT.
Oberflächen nach
DIN ISO 1302
Reihe 2
Zul. Abweichung
DIN 2768 - mH
1
ascendo 2A
Benennung
Gepr.
Werkstoff
Blatt
Datum
Projekt
Gez.
Zuschnitt
Zeichnungsnummer
Rev Änderung Datum
1:50
A3
Gewicht
Name
Name
Draufsicht
1028-00-00
1206.7 Maßstab
Mattheis
03.05.17
a Mindestraum geändert 24.05.17 DB
Gewerbegebiet Larsheck
56271 Kleinmaischeid
Deutschland
Beton
Concrete
Füllmaterial
Filling
Erde
Ground
Legende

© stilum GmbH, 56271 Kleinmaischeid • Tel. [phone] • Alle Rechte und Produktmodikationen vorbehalten State: 28.10.2019 p. 5
Mounting instructions for multiplay equipment „ascendo 2 robinia“
Item-No. 517510601
Diagram 5b: connection „climbing slant“
lug
connection climbing
bow
pipe adapter
Diagram 5a: connection „climbing bow
and wobble bridge“
Diagram 5c: connection „reman‘s post“
Diagram 5d: connection „slide“
Rev.:
Projekt:
BESTELL-NR:
ZG-NR:
BENENNUNG:
OHNE SCHRIFTLICHE ZUSTIMMUNG DER CONRADI + KAISER GMBH DARF DIESE TECHNISCHE UNTERLAGE WEDER VERVIELFÄLTIGT
NOCH DRITTEN MITGETEILT ODER ZUGÄNGLICH GEMACHT WERDEN NOCH IN SONSTIGER WEISE MISSBRÄEUCHLICH VERWENDET
WERDEN. ZUWIDERHANDLUNGEN WERDEN URHEBERRECHTLICH VERFOLGT.
FREIG:
GEPR:
GEZ:
DATUM: NAME:
WERKSTOFF

MAßSTAB:
OBERFLAECHEN NACH
DIN ISO 1302 REIHE 2
ZUL. ABWEICHUNG
DIN 2768 - mH
+0,3
-0,3
WERKSTUECKKANTEN
NACH DIN 6784
Gewerbegebiet Larsheck
56271 Kleinmaischeid
Deutschland
A3
0201-00-00
29.04.2016
Abmaße:
Fertigung:
x
x
Gewicht:
1573590.1
ascendo robinie2
Rev.:
Projekt:
BESTELL-NR:
ZG-NR:
BENENNUNG:
OHNE SCHRIFTLICHE ZUSTIMMUNG DER CONRADI + KAISER GMBH DARF DIESE TECHNISCHE UNTERLAGE WEDER VERVIELFÄLTIGT
NOCH DRITTEN MITGETEILT ODER ZUGÄNGLICH GEMACHT WERDEN NOCH IN SONSTIGER WEISE MISSBRÄEUCHLICH VERWENDET
WERDEN. ZUWIDERHANDLUNGEN WERDEN URHEBERRECHTLICH VERFOLGT.
FREIG:
GEPR:
GEZ:
DATUM: NAME:
WERKSTOFF

MAßSTAB:
OBERFLAECHEN NACH
DIN ISO 1302 REIHE 2
ZUL. ABWEICHUNG
DIN 2768 - mH
+0,3
-0,3
WERKSTUECKKANTEN
NACH DIN 6784
Gewerbegebiet Larsheck
56271 Kleinmaischeid
Deutschland
A3
0201-00-00
29.04.2016
Abmaße:
Fertigung:
x
x
Gewicht:
1573587.9
ascendo robinie2
B
B (1 : 10)
D
D (1 : 10)
OHNE SCHRIFTLICHE ZUSTIMMUNG DER CONRADI+KAISER GMBH DARF DIESE
TECHNISCHE UNTERLAGE WEDER VERVIELFÄLTIGT, NOCH DRITTEN MITGETEILT ODER
ZUGÄNGLICH GEMACHT WERDEN, NOCH IN SONSTIGER WEISE MISSBRÄEUCHLICH VER-
WENDET WERDEN. ZUWIDERHANDLUNGEN WERDEN URHEBERRECHTLICH VERFOLGT.
Oberflächen nach
DIN ISO 1302
Reihe 2
Zul. Abweichung
DIN 2768 - mH
1
ascendo 2A
Benennung
Gepr.
Werkstoff
Blatt
Datum
Projekt
Gez.
Zuschnitt
Zeichnungsnummer
Rev Änderung Datum
1:100
A3
Gewicht
Name
Name
Explosion
1028-00-00
1068.7 Maßstab
Simonis 05.10.18
Gewerbegebiet Larsheck
56271 Kleinmaischeid
Deutschland
B
B (1 : 10)
OHNE SCHRIFTLICHE ZUSTIMMUNG DER CONRADI+KAISER GMBH DARF DIESE
WENDET WERDEN. ZUWIDERHANDLUNGEN WERDEN URHEBERRECHTLICH VERFOLGT.
Oberflächen nach
DIN ISO 1302
Reihe 2
Zul. Abweichung
DIN 2768 - mH
1
ascendo 2A
Benennung
Gepr.
Werkstoff
Blatt
Datum
Projekt
Gez.
Zuschnitt
Zeichnungsnummer
Rev Änderung Datum
1:100
A3
Gewicht
Name
Name
Explosion
1028-00-00
1206.7 Maßstab
Simonis 05.10.18
Gewerbegebiet Larsheck
56271 Kleinmaischeid
Deutschland

© stilum GmbH, 56271 Kleinmaischeid • Tel. [phone] • Alle Rechte und Produktmodikationen vorbehalten State: 28.10.2019 p. 6
Mounting instructions for multiplay equipment „ascendo 2 robinia“
Item-No. 517510601
In order to preserve a good visual appearance of your stilum playground equipment
over a long period one should take care of maintenance of the stainless surface
even despite of their corrosion resistance.
Especially areas, which can not be reached by rainfall should be frequently cleaned
from dirt and deposits due to air pollution and dirt caused by the atmosphere.
Light soiling can easily be romoved by using a high pressure cleaner.
For persistent deposits use a clean cloth moistened with a special liquid cleaner
(e.g. on phosphoric acid) and rinse off with clear water after a short application time.
During cleaning with mild abrasive components, only wipe over stainless steel sur-
face in polishing direction.
For heavily soiled surfaces, polishes can be used (e.g. for cleaning chrome on cars)
or for greasy and oily dirt alcoholic cleaning agents and solvents (e.g. ethyl alcohol,
isopropyl alcohol or acetone).
However, it should be noted that the dissolved soiling is not spread over the surface
again.
Do not use any chlorid or hydrochloric containing cleaning products nor scouring
powder, bleaching - or silver polish cleaner. Cleaning intervals depend on type and
degree of soiling as well as on demands made on optical characteristics. Therefore
cleaning is advisable at intervals of six to twelve months – whereby in the case of
strong soiling it is appropriate to clean the playground equipment at intervals of three
to six months.
WOOD
NOTE: For all play equipment with wooden elements, it cannot be ruled out that dry
cracks may develop. These natural changes of wood are dependent on climate con-
ditions as well as on the age and usage of the play equipment. Longer dry periods
may lead to more dry cracks.
This development, however, does not represent a quality defect. Static properties of
the equipment are not impaired.
See EN 1176 Bbl 1:2019-01 4.2.7.6: Dry cracks in wood elements as a conse-
quence of weather conditions are not to be considered as dangerous openings in
terms of the standard due to the fact that the shape of the cracks (tapering towards
the inside) makes it almost impossible for ngers to get trapped in them.
MAINTENANCE: To ensure a long life of stilum playground equipment, wooden
surfaces should be regularly re-glazed. This provides the wooden surfaces with the
necessary protection and preserves the look. Areas which are not exposed to rain
should be regularly freed from deposits.
The cleaning intervals depend on the degree and type of soiling as well as on the
exigencies on cleanliness. It is recommended to clean and / or glaze at every 6
to 12 months, or to shorten the cleaning interval to 3 to 6 months if the wheather
conditions are bad.
LASUR: Use a soft and at brush or / and a glaze application roll to paint.
The wood should be cleaned a few hours before glazing. That can be done with
mild javel water, which should in any case be rubbed off afterwards. For resistant
dirt use a wood cleaner. Eventually a light abrasion is necessary. If water-based de-
tergents are used for cleaning, please ensure that the wood elements are thorough-
ly dried before the glazing is done.
Always brush in one direction, so that the glaze can spread evenly. Apply very
thinly!
Remove glaze with a soft cotton cloth.
Then let the freshly glazed wood dry for at least one day and prohibit the use of the
equipment for this duration.