stilum Tamino 2 User guide

State: 19.09.2017 p. 1
Mounting instruction climbing equipment „Tamino 2“
Item-No. 51 5560 601
© stilum GmbH, 56271 Kleinmaischeid • Tel. [phone] • All rights and product modications reserved
Diagram 1: Overall view of play equipment with description of individual elements
balance board
double bow
hexacons
slide
climbing net
climbing bow
ladder bow

State: 19.09.2017 p. 2
Mounting instruction climbing equipment „Tamino 2“
Item-No. 51 5560 601
© stilum GmbH, 56271 Kleinmaischeid • Tel. [phone] • All rights and product modications reserved
1. Select the play equipment location in consideration of the required safety
area (see Diagram 3: 6250mm x 10200mm mm).
2. Carry out excavation work for 14 foundations as shown in Diagram 2.
After excavation, compress the foundation oor.
Note: The combination equipment is built in on the play level. Pay attention
to items marked „game level” of play equipment!
3. Setup the main foundation (T-form: LxWxH 1350x1000x300mm), and the
foundation for the climbing bow (LxWxH 600 x 800 x 300mm), the foundation
for the climbing net (1100 x 300 x 300mm), the foundation of the slide (800 x
600 x 300mm) and the 10 other foundations acc. to the dimensions indicated
in diagram 2 the quality class C 20/25 with horizontal reinforcement.
4. After a setting period of 10-14 days, depending on weather conditions and
foundation size - clean the surface of the foundations and start with the instal-
lation of the combination equipment.
Diagram 2: Side view with dimensions „Tamino 2“
Reinforcement plan:
Concrete foundation with reinforcement
Main foundation: BSt 500S
Ever 4 stirrups Ø 8 mm lengthwise and cross
Concrete cover h´= 3 cm
Concrete quality class C 20/25
Foundations for attachment parts are no-reinforced
300
7390
450
239
1469
2421
OHNE SCHRIFTLICHE ZUSTIMMUNG DER CONRADI+KAISER GMBH DARF DIESE
TECHNISCHE UNTERLAGE WEDER VERVIELFÄLTIGT, NOCH DRITTEN MITGETEILT ODER
ZUGÄNGLICH GEMACHT WERDEN, NOCH IN SONSTIGER WEISE MISSBRÄEUCHLICH VER-
WENDET WERDEN. ZUWIDERHANDLUNGEN WERDEN URHEBERRECHTLICH VERFOLGT.
Oberflächen nach
DIN ISO 1302
Reihe 2
Zul. Abweichung
DIN 2768 - mH
1
Tamino 2
Benennung
Gepr.
Werkstoff
Blatt
Datum
Projekt
Gez.
Zuschnitt
Zeichnungsnummer
Rev Änderung Datum
1:30
A3
Gewicht
Name
Name
Fundament
1014-00-00
14962.0 Maßstab
Behnke 18.08.17
Gewerbegebiet Larsheck
56271 Kleinmaischeid
Deutschland
Beton
Concrete
Füllmaterial
Filling
Erde
Ground
Legende

State: 19.09.2017 p. 3
Mounting instruction climbing equipment „Tamino 2“
Item-No. 51 5560 601
© stilum GmbH, 56271 Kleinmaischeid • Tel. [phone] • All rights and product modications reserved
369
369
369
369
27°
27°
41
27°
2131
1646
1376
1121
972
1240
1389
1925
1971
2071
3220
1327
2090
2625
3064
3564
4659
4724
4859
4929
5065
7168
OHNE SCHRIFTLICHE ZUSTIMMUNG DER CONRADI+KAISER GMBH DARF DIESE
TECHNISCHE UNTERLAGE WEDER VERVIELFÄLTIGT, NOCH DRITTEN MITGETEILT ODER
ZUGÄNGLICH GEMACHT WERDEN, NOCH IN SONSTIGER WEISE MISSBRÄEUCHLICH VER-
WENDET WERDEN. ZUWIDERHANDLUNGEN WERDEN URHEBERRECHTLICH VERFOLGT.
Oberflächen nach
DIN ISO 1302
Reihe 2
Zul. Abweichung
DIN 2768 - mH
2
Tamino 2
Benennung
Gepr.
Werkstoff
Blatt
Datum
Projekt
Gez.
Zuschnitt
Zeichnungsnummer
Rev Änderung Datum
1:35
A3
Gewicht
Name
Name
Fundament
1014-00-00
14073.0 Maßstab
Behnke 18.08.17
Gewerbegebiet Larsheck
56271 Kleinmaischeid
Deutschland
Beton
Concrete
Füllmaterial
Filling
Erde
Ground
Legende
600
600
600
600
600
600
600
600
600
600
600
600
600
600
600
600
600
600
600
600
1000
1000
353
500
250
800
600
1100
300
600
600
OHNE SCHRIFTLICHE ZUSTIMMUNG DER CONRADI+KAISER GMBH DARF DIESE
TECHNISCHE UNTERLAGE WEDER VERVIELFÄLTIGT, NOCH DRITTEN MITGETEILT ODER
ZUGÄNGLICH GEMACHT WERDEN, NOCH IN SONSTIGER WEISE MISSBRÄEUCHLICH VER-
WENDET WERDEN. ZUWIDERHANDLUNGEN WERDEN URHEBERRECHTLICH VERFOLGT.
Oberflächen nach
DIN ISO 1302
Reihe 2
Zul. Abweichung
DIN 2768 - mH
3
Tamino 2
Benennung
Gepr.
Werkstoff
Blatt
Datum
Projekt
Gez.
Zuschnitt
Zeichnungsnummer
Rev Änderung Datum
1:25
A3
Gewicht
Name
Name
Fundament
1014-00-00
14073.0 Maßstab
Behnke 18.08.17
Gewerbegebiet Larsheck
56271 Kleinmaischeid
Deutschland
Beton
Concrete
Füllmaterial
Filling
Erde
Ground
Legende
Diagram 2b: Position of the foundations „Tamino 2“
Diagram 2c: Dimensions of the foundation „Tamino 2“

State: 19.09.2017 p. 4
Mounting instruction climbing equipment „Tamino 2“
Item-No. 51 5560 601
© stilum GmbH, 56271 Kleinmaischeid • Tel. [phone] • All rights and product modications reserved
5. Place the head of the catarpillar as described in diagramm 2 and 4
onto the foundation.
Note: Do not screw the base plates onto the foundations yet!
6. Cennect the slide with the palps of the caterpillar and align the
head of the caterpillar pnce more.
7. Place the balance board and the other hexagons according to the
postitions in diagram 3.
8. Add the addition parts (double bow, ladder bow, climbing bow
and climbing net) as shown in diagram 1 and connect it with the
screws included in the delivery.
9. Align the play equipment once more on the foundations.
Note: Avoid sagging of the climbing net.
10. Drill holes into all foundations and screw the play equipment into
the foundations with the included heavy-duty dowels.
11. Fill up and compress the holes between the foundation and the
foundation hole with the excavation.
Diagram 3: Position of the elements
1333
296
535
7358
2873
450
3432
1881
27°
27°
27°
795
307
802
27°
798
303
1384
2175
3034
4331
330
849
307
OHNE SCHRIFTLICHE ZUSTIMMUNG DER CONRADI+KAISER GMBH DARF DIESE
TECHNISCHE UNTERLAGE WEDER VERVIELFÄLTIGT, NOCH DRITTEN MITGETEILT ODER
ZUGÄNGLICH GEMACHT WERDEN, NOCH IN SONSTIGER WEISE MISSBRÄEUCHLICH VER-
WENDET WERDEN. ZUWIDERHANDLUNGEN WERDEN URHEBERRECHTLICH VERFOLGT.
Oberflächen nach
DIN ISO 1302
Reihe 2
Zul. Abweichung
DIN 2768 - mH
2
Tamino 2
Benennung
Gepr.
Werkstoff
Blatt
Datum
Projekt
Gez.
Zuschnitt
Zeichnungsnummer
Rev Änderung Datum
1:30
A3
Gewicht
Name
Name
Übersicht
1014-00-00
1045.7 Maßstab
Schramm 27.06.17
Gewerbegebiet Larsheck
56271 Kleinmaischeid
Deutschland

State: 19.09.2017 p. 5
Mounting instruction climbing equipment „Tamino 2“
Item-No. 51 5560 601
© stilum GmbH, 56271 Kleinmaischeid • Tel. [phone] • All rights and product modications reserved
12. Seal the foundation with the safety cover required for the height of fall
indicated.
Critical drop height: 800 mm.
Recommended surface material: grass, sand, wood chip, gravel,
synth. fall protection.
13. Do not allow children to use the equipment before the installation has
been nished.
14. After 3 months, check the screws at the joints and retighten them if
necessary.
Attention: If the play equipment has been incompletely installed or partly
dismantled when carrying out maintenance and repair work, this may
lead to
particular risks of injury for the user. For this reason, make clearly visible
that the equipment shall not be used in such cases.
NOTE: Play equipment, which contain components made of stainless
steel should not come with „normal“ steel parts in contact. Those steel
parts may rub off and leave small steel particles in combination with
moisture brown rust stains. If such corrosion occur on stainless steel
parts, they are ne to remove with an abrasive (240 grit).
Please take care when transporting and setting up the fact that the com-
ponents are made of stainless steel with no „normal“ steel parts in contact.
With every playground equipment with wooden parts might occur desica-
tion cracks caused by the weather. These desication cracks are admissi-
bly according to the EN 1176 Bbl 1:2009-1, 4.2.7.6.
Diagram 4: Minimum space „Tamino 2“
R
1500
R
1500
6250
1500
3000
10200
OHNE SCHRIFTLICHE ZUSTIMMUNG DER CONRADI+KAISER GMBH DARF DIESE
TECHNISCHE UNTERLAGE WEDER VERVIELFÄLTIGT, NOCH DRITTEN MITGETEILT ODER
ZUGÄNGLICH GEMACHT WERDEN, NOCH IN SONSTIGER WEISE MISSBRÄEUCHLICH VER-
WENDET WERDEN. ZUWIDERHANDLUNGEN WERDEN URHEBERRECHTLICH VERFOLGT.
Oberflächen nach
DIN ISO 1302
Reihe 2
Zul. Abweichung
DIN 2768 - mH
1
Tamino 2
Benennung
Gepr.
Werkstoff
Blatt
Datum
Projekt
Gez.
Zuschnitt
Zeichnungsnummer
Rev Änderung Datum
1:50
A3
Gewicht
Name
Name
Draufsicht
1013-00-00
867.7 Maßstab
Behnke 23.0617
Gewerbegebiet Larsheck
56271 Kleinmaischeid
Deutschland

State: 19.09.2017 p. 6
Mounting instruction climbing equipment „Tamino 2“
Item-No. 51 5560 601
© stilum GmbH, 56271 Kleinmaischeid • Tel. [phone] • All rights and product modications reserved
In order to preserve a good visual appearance of your stilum playground equipment
over a long period one should take care of maintenance of the stainless surface
even despite of their corrosion resistance.
Especially areas, which can not be reached by rainfall should be frequently cleaned
from dirt and deposits due to air pollution and dirt caused by the atmosphere.
Light soiling can easily be romoved by using a high pressure cleaner.
For persistent deposits use a clean cloth moistened with a special liquid cleaner
(e.g. on phosphoric acid) and rinse off with clear water after a short application time.
During cleaning with mild abrasive components, only wipe over stainless steel sur-
face in polishing direction.
For heavily soiled surfaces, polishes can be used (e.g. for cleaning chrome on cars)
or for greasy and oily dirt alcoholic cleaning agents and solvents (e.g. ethyl alcohol,
isopropyl alcohol or acetone).
However, it should be noted that the dissolved soiling is not spread over the surface
again.
Do not use any chlorid or hydrochloric containing cleaning products nor scouring
powder, bleaching - or silver polish cleaner. Cleaning intervals depend on type and
degree of soiling as well as on demands made on optical characteristics. Therefore
cleaning is advisable at intervals of six to twelve months – whereby in the case of
strong soiling it is appropriate to clean the playground equipment at intervals of 3 to
six months.
MAINTENANCE OF WOODEN ELEMENTS
To ensure a long life of stilum playground equipment, wooden surfaces should be
regularly re-glazed. This provides the wooden surfaces with the necessary protec-
tion and preserves the look. Areas which are not exposed to rain should be regular-
ly freed from deposits.
The cleaning intervals depend on the degree and type of soiling as well as on the
exigencies on cleanliness. It is recommended to clean and / or glaze at every 6
to 12 months, or to shorten the cleaning interval to 3 to 6 months if the wheather
conditions are bad.
LASUR APPLICATION
Use a soft and at brush or / and a glaze application roll to paint.
The wood should be cleaned a few hours before glazing. That can be done with
mild javel water, which should in any case be rubbed off afterwards. For resistant
dirt use a wood cleaner. Eventually a light abrasion is necessary. If water-based de-
tergents are used for cleaning, please ensure that the wood elements are thorough-
ly dried before the glazing is done.
Always brush in one direction, so that the glaze can spread evenly. Apply very
thinly!
Remove glaze with a soft cotton cloth.
Then let the freshly glazed wood dry for at least one day and prohibit the use of the
equipment for this duration.