stilum retis 2 User manual

© stilum GmbH, Gewerbegebiet Larsheck, 56271 Kleinmaischeid • Tel. [phone] • Alle Rechte und Produktmodikationen vorbehalten Stand: 20.06.2016 S. 1
Mounting instructions for climbing equipment „retis 2“
Artikel-Nr. 51 5515 401
Diagramm 1: Overall view play equipment

© stilum GmbH, Gewerbegebiet Larsheck, 56271 Kleinmaischeid • Tel. [phone] • Alle Rechte und Produktmodikationen vorbehalten Stand: 20.06.2016 S. 2
Mounting instructions for climbing equipment „retis 2“
Artikel-Nr. 51 5515 401
600
450
400
1230
2849 2609
Spielebene
Play level
Kennzeichnung
Einbautiefe
1200
Rev.:
Projekt:
BESTELL-NR:
ZG-NR:
BENENNUNG:
OHNE SCHRIFTLICHE ZUSTIMMUNG DER CONRADI + KAISER GMBH DARF DIESE TECHNISCHE UNTERLAGE WEDER VERVIELFÄLTIGT
NOCH DRITTEN MITGETEILT ODER ZUGÄNGLICH GEMACHT WERDEN NOCH IN SONSTIGER WEISE MISSBRÄEUCHLICH VERWENDET
WERDEN. ZUWIDERHANDLUNGEN WERDEN URHEBERRECHTLICH VERFOLGT.
FREIG:
GEPR:
GEZ:
DATUM: NAME:
WERKSTOFF

MAßSTAB:
OBERFLAECHEN NACH
DIN ISO 1302 REIHE 2
ZUL. ABWEICHUNG
DIN 2768 - mH
+0,3
-0,3
WERKSTUECKKANTEN
NACH DIN 6784
Gewerbegebiet Larsheck
56271 Kleinmaischeid
Deutschland
A3
09.04.2015
Abmaße:
Fertigung:
M.Boehm
-
Gewicht:
Retis2
Fundamentplan
play level
concrete foundations
1. Select the play equipment location in consideration of the required safety
area (see Diagram 3: 6800mm x 4700mm).
2. Carry out excavation work for the foundation anchor as shown in Diagram 2
and 3. After excavation, compress the foundation oor.
Note: The climbing equipment is built in on the play level. Pay attention to
items marked „game level” of play equipment!
3. Set up the 2 main concrete foundations (LxWxH 600 x 1200 x 400mm) in
the quality class C 20/25 according to the dimensions indicated in diagram
2 and 3.
4. After a setting period of 10-14 days, depending on weather conditions and
foundation size - clean the surface of the foundations and place the equip-
ment as shown in the overview and in the Diagram 2 and 3 on the main
foundation.
695,2
42,4
x3,25
60,3 x3,65
400 420
2200
2250
2640 2880
1060
Kennzeichnung
Einbautiefe
2310
480
480
600
1200
2430
Kugel
160
4700
6800
Mindestraum 27,3m²
Bedarf Fallschutzplatten 32m²
15.11.2012
OHNE SCHRIFTLICHE ZUSTIMMUNG DER CONRADI + KAISER GMBH DARF DIESE TECHNISCHE UNTERLAGE WEDER VERVIELFÄLTIGT
NOCH DRITTEN MITGETEILT ODER ZUGÄNGLICH GEMACHT WERDEN NOCH IN SONSTIGER WEISE MISSBRÄEUCHLICH VERWENDET
WERDEN. ZUWIDERHANDLUNGEN WERDEN URHEBERRECHTLICH VERFOLGT.
Rev.:
KUNDE:
BESTELL-NR:
ZG-NR:
BENENNUNG:
WERKSTOFF / ROHMAß:

MAßSTAB:
ZUL. ABWEICHUNG
DIN 2768 - mH
OBERFLAECHEN NACH
DIN ISO 1302 REIHE 2
+0,3
-0,3
WERKSTUECKKANTEN
NACH DIN 6784
FREIG:
GEPR:
GEZ:
DATUM: NAME:
Gewerbegebiet Larsheck
56271 Kleinmaischeid
Deutschland
A2
Retis2 zusammenbau
Reinforcement plan:
Concrete foundation with reinforcement
Main foundation: BSt 500S
Ever 4 stirrups Ø 8 mm lengthwise and cross
Concrete cover h´= 3 cm
Concrete quality class C 20/25
Foundations for attachment parts are no-reinforced
Diagramm 2: Rear view with dimension details „retis 2“
Diagramm 3: Top view foundationplan

© stilum GmbH, Gewerbegebiet Larsheck, 56271 Kleinmaischeid • Tel. [phone] • Alle Rechte und Produktmodikationen vorbehalten Stand: 20.06.2016 S. 3
Mounting instructions for climbing equipment „retis 2“
Artikel-Nr. 51 5515 401
5. Drill holes into all foundations and screw the play equipment into the founda-
tions with the included heavy-duty dowels.
6. Fill up and compress the holes between the foundation and the foundation
hole with the excavation.
7. Seal the foundation with the safety cover required for the height of fall
indicated.
Critical drop height: 2600 mm.
Recommended surface material: sand, wood chip, gravel,
synth. fall protection.
8. After 3 months, check the screws at the joints and retighten them if
necessary.
9. Do not allow children to use the equipment before the installation has been
nished.
Diagramm 4: Top view dimension details
695,2
42,4
x3,25
60,3 x3,65
2250
400 450
3300
2850
2600
2200
1030
Kennzeichnung
Einbautiefe
2310
480
480
600
1200
2430
Kugel
160
4700
6800
Mindestraum 27,3m²
Bedarf Fallschutzplatten 32m²
24.10.2012
OHNE SCHRIFTLICHE ZUSTIMMUNG DER CONRADI + KAISER GMBH DARF DIESE TECHNISCHE UNTERLAGE WEDER VERVIELFÄLTIGT
NOCH DRITTEN MITGETEILT ODER ZUGÄNGLICH GEMACHT WERDEN NOCH IN SONSTIGER WEISE MISSBRÄEUCHLICH VERWENDET
WERDEN. ZUWIDERHANDLUNGEN WERDEN URHEBERRECHTLICH VERFOLGT.
Rev.:
KUNDE:
BESTELL-NR:
ZG-NR:
BENENNUNG:
WERKSTOFF / ROHMAß:

MAßSTAB:
ZUL. ABWEICHUNG
DIN 2768 - mH
OBERFLAECHEN NACH
DIN ISO 1302 REIHE 2
+0,3
-0,3
WERKSTUECKKANTEN
NACH DIN 6784
FREIG:
GEPR:
GEZ:
DATUM: NAME:
Gewerbegebiet Larsheck
56271 Kleinmaischeid
Deutschland
A2
Retis2 zusammenbau

© stilum GmbH, Gewerbegebiet Larsheck, 56271 Kleinmaischeid • Tel. [phone] • Alle Rechte und Produktmodikationen vorbehalten Stand: 20.06.2016 S. 4
Mounting instructions for climbing equipment „retis 2“
Artikel-Nr. 51 5515 401
Attention: If the play equipment has been incompletely installed or partly dis-
mantled when carrying out maintenance and repair work, this may lead to
particular risks of injury for the user. For this reason, make clearly visible that the
equipment shall not be used in such cases.
NOTE: Play equipment, which contain components made of stainless steel
should not come with „normal“ steel parts in contact. Those steel parts may rub
off and leave small steel particles in combination with moisture brown rust stains.
If such corrosion occur on stainless steel parts, they are ne to remove with an
abrasive (240 grit).
Please take care when transporting and setting up the fact that the components
are made of stainless steel with no „normal“ steel parts in contact.
In order to preserve a good visual appearance of your stilum playground equip-
ment over a long period one should take care of maintenance of the stainless
surface even despite of their corrosion resistance.
Especially areas, which can not be reached by rainfall, should be frequently
cleaned from dirt and deposits due to air pollution and dirt caused by the atmos-
phere. Light soiling can easily be removed by using a high pressure cleaner. For
persistent deposits use a clean cloth moistened with a special liquid cleaner (e.g.
on phosphoric acid) and rinse off with clear water after a short application time.
During cleaning with mild abrasive components, only wipe over stainless steel
surface in polishing direction. For heavily soiled surfaces, polishes can be used
(e.g. for cleaning chrome on cars) or for greasy and oily dirt alcoholic cleaning
agents and solvents (e.g. ethyl alcohol, isopropyl alcohol or acetone).
However, it should be noted that the dissolved soiling is not spread over the
surface again. Do not use any chloride or hydrochloric containing cleaning
products nor scouring powder, bleaching - or silver polish cleaner. Cleaning
intervals depend on type and degree of soiling as well as on demands made on
optical characteristics. Therefore cleaning is advisable at intervals of six to twelve
months – whereby in
the case of strong soiling it is appropriate to clean the playground equipment at
intervals of 3 to 6 months.