stilum gravis1 User manual

© stilum GmbH, 56271 Kleinmaischeid • Tel. [phone] • Alle Rechte und Produktmodikationen vorbehalten
Mounting instructions for multiplay equipment „gravis1“
Stand: 21.04.2015 S. 1
Diagram 1: Overall view of play equipment with description of individual elements
slide
tower
climbing net
Artikel-Nr. 515516401

© stilum GmbH, 56271 Kleinmaischeid • Tel. [phone] • Alle Rechte und Produktmodikationen vorbehalten
Mounting instructions for multiplay equipment „gravis1“
Stand: 21.04.2015 S. 2
Diagram 2a: Rear view with dimension details „gravis1“
Diagram 2b: Top view with dimension details „gravis1“
4573
2962
3903
500
150
OK
Legende
Beton
Concrete
Füllmaterial
Filling
D
E
F
C
1 2 3 4
B
A
3 2 1 5
C
D
4 6 7 8
A
B
Zust.
Änderung
Datum
Datum
Name
Name
Bearb.
Gepr.
Norm
A3
Bl.
Allgemein-
toleranzen
DIN 7168-m
Maßstab 1:30
19.02.2015
Kistinger
Gravis 1
Fundamentzeichnung
0118-00-00
Fertigung
E
1800
1800
2000
1500
R
1000
R
1800
R
1000
1800
1500
8397
R
1800
5869
R
1800
D
E
F
C
1 2 3 4
B
A
3 2 1 5
C
D
4 6 7 8
A
B
Zust.
Änderung
Datum
Datum
Name
Name
Bearb.
Gepr.
Norm
A3
Bl.
Allgemein-
toleranzen
DIN 7168-m
Maßstab 1:100
13.09.2014
M.Boehm
Gravis
0118-00-00-Kletterturm-ds
0118-00-00
Fertigung
E
safety zone

© stilum GmbH, 56271 Kleinmaischeid • Tel. [phone] • Alle Rechte und Produktmodikationen vorbehalten
Mounting instructions for multiplay equipment „gravis1“
Stand: 21.04.2015 S. 3
Foundation
1. Select the play equipment location in consideration of the required safety
area (see Diagram 3: 5900mm x 8400mm).
2. Carry out excavation work for foundation as shown in Diagram 3 5. After
excavation, compress the foundation oor.
Note: Cover the foundation holes with the safety cover required for the height
of fall indicated.The combination equipment is built in on the play level. Pay
attention to items marked „game level” of play equipment!
3. Set up the 3 main concrete foundations (LxWxH 600 x 600 x 500 mm) and
the slide foundation (LxWxH 1200 x 500 x 500 mm) acc. to the dimensions
indicated in diagram 3 in the quality class C 20/25.
4. After a setting period of 10-14 days, depending on weather conditions and
foundation size - clean the surface of the foundations and start with the instal-
lation of the combination equipment.
5. Place the pre-assembled tower as shown in the overview and in the Diagram
2a on the main foundation and do a rough aligning.
Note: Do not screw the base plates onto the foundations yet!
6. Connect the slide at the intended locations acc. to the Diagram 4. Please
fasten the parts using the screws including in the delivery.
Diagram 3: Foundation plan
Reinforcement plan:
Concrete foundation with reinforcement
Main foundation: BSt 500S
Ever 4 stirrups Ø 8 mm lengthwise and cross
Concrete cover h´= 3 cm
Concrete quality class C 20/25
Foundations for attachment parts are no-reinforced
716
1857
1857
1857
1091
251
500
1200
600
600
2082
2082
2082
D
E
F
C
1 2 3 4
B
A
3 2 1 5
C
D
4 6 7 8
A
B
Zust.
Änderung
Datum
Datum
Name
Name
Bearb.
Gepr.
Norm
A3
Bl.
Allgemein-
toleranzen
DIN 7168-m
Maßstab 1:50
19.02.2015
Kistinger
Gravis 1
Fundamentzeichnung
0118-00-00
Fertigung
E

© stilum GmbH, 56271 Kleinmaischeid • Tel. [phone] • Alle Rechte und Produktmodikationen vorbehalten
Mounting instructions for multiplay equipment „gravis1“
Stand: 21.04.2015 S. 4
Delivery contents and addition of the single elements
7. Align the play equipment more on the foundations.
8. Drill holes into all foundations and screw the play equipment into the founda-
tions with the included heavy-duty dowels.
9. Seal the foundation with the safety cover required for the height of fall
indicated.
Critical drop height: 1400 mm.
Recommended surface material: synth. fall protection.
10. After 3 months, check the screws at the joints and retighten them if
necessary.
11. Do not allow children to use the equipment before the installation has been
nished.
Attention: If the play equipment has been incompletely installed or partly dis-
mantled when carrying out maintenance and repair work, this may lead to
particular risks of injury for the user. For this reason, make clearly visible that the
equipment shall not be used in such cases.
Diagram 4: Slide
Rutsche aufgelegt
auf Gravis1 und mit
VA Senkschrauben
M10x20 verschraubt
Rev.:
Projekt:
BESTELL-NR:
ZG-NR:
BENENNUNG:
OHNE SCHRIFTLICHE ZUSTIMMUNG DER CONRADI + KAISER GMBH DARF DIESE TECHNISCHE UNTERLAGE WEDER VERVIELFÄLTIGT
NOCH DRITTEN MITGETEILT ODER ZUGÄNGLICH GEMACHT WERDEN NOCH IN SONSTIGER WEISE MISSBRÄEUCHLICH VERWENDET
WERDEN. ZUWIDERHANDLUNGEN WERDEN URHEBERRECHTLICH VERFOLGT.
FREIG:
GEPR:
GEZ:
DATUM: NAME:
WERKSTOFF

MAßSTAB:
OBERFLAECHEN NACH
DIN ISO 1302 REIHE 2
ZUL. ABWEICHUNG
DIN 2768 - mH
+0,3
-0,3
WERKSTUECKKANTEN
NACH DIN 6784
Gewerbegebiet Larsheck
56271 Kleinmaischeid
Deutschland
A3
24.03.2015
Abmaße:
Fertigung:
x
x
Gewicht:

© stilum GmbH, 56271 Kleinmaischeid • Tel. [phone] • Alle Rechte und Produktmodikationen vorbehalten
Mounting instructions for multiplay equipment „gravis1“
Stand: 21.04.2015 S. 5
NOTE: Play equipment, which contain components made of stainless steel should
not come with „normal“ steel parts in contact. Those steel parts may rub
off and leave small steel particles in combination with moisture brown rust stains. If
such corrosion occur on stainless steel parts, they are ne to remove with an abrasi-
ve (240 grit).
Please take care when transporting and setting up the fact that the components are
made of stainless steel with no „normal“ steel parts in contact.
In order to preserve a good visual appearance of your stilum playground equipment
over a long period one should take care of maintenance of the stainless
surface even despite of their corrosion resistance. Especially areas, which can not
be reached by rainfall, should be frequently cleaned from dirt and deposits due to air
pollution and dirt caused by the atmosphere. Light soiling can easily be removed by
using a high pressure cleaner. For persistent deposits use a clean cloth moistened
with a special liquid cleaner (e.g. on phosphoric acid) and rinse off with clear water
after a short application time. During cleaning with mild abrasive components, only
wipe over stainless steel surface in polishing direction. For heavily soiled surfaces,
polishes can be used (e.g. for cleaning chrome on cars) or for greasy and oily dirt
alcoholic cleaning agents and solvents (e.g. ethyl alcohol, isopropyl alcohol or ace-
tone). However, it should be noted that the dissolved soiling is not spread over the
surface again. Do not use any chloride or hydrochloric containing cleaning products
nor scouring powder, bleaching - or silver polish cleaner. Cleaning intervals depend
on type and degree of soiling as well as on demands made on optical characteris-
tics. Therefore cleaning is advisable at intervals of six to twelve months – whereby in
the case of strong soiling it is appropriate to clean the playground equipment at inter-
vals of 3 to 6 months.