stilum lixus User manual

© stilum GmbH, Gewerbegebiet Larsheck, D-56271 Kleinmaischeid • Tel. [phone] • All rights and product modications reserved
Mounting instructions for slackline „lixus“ triangle
Item No. 51 6510 404
state: 09.06.2020 p. 1
Diagram 1: Overall view of the play equipment

© stilum GmbH, Gewerbegebiet Larsheck, D-56271 Kleinmaischeid • Tel. [phone] • All rights and product modications reserved
Mounting instructions for slackline „lixus“ triangle
Item No. 51 6510 404
state: 09.06.2020 p. 2
1. Select the location of the play equipment taking into account the required
minimum space (see diagram 4).
2. Carry out excavation work for the foundations as shown in diagram 2. After
excavation compress the foundation oor.
Note: The slackline is installed at play level. Pay attention to items marked
„play level“ at play equipment!
3. Set up the concrete foundations according to diagram 2 with central, horizon-
tal reinforcement. Pour the supplied foundation anchors in the foundation so
that the upper angle frame is horizontal and ush with the foundation surface.
4. After a setting period of 10 – 14 days, depending on weather conditions and
foundation size, ll up and compress the holes between the foundation and
the foundation hole with excavation.
5. Clean the foundation surface and place the platforms of the play equipment
on the foundation anchors and screw it down.
6. Fasten the ropes of each slackline on the xed side of the platform and lock it
with the nuts included in the delivery (acc. to diagram 3a).
7. Attach the other end of the ropes at the clamping device acc. to diagram 3b.
Tension the ropes to a distance of 80 mm.
platform
slackline
Diagram 2: Foundation plan
Reinforcement plan: Concrete foundation with reinforcement
Main foundation: BSt 500S
Stirrups Ø 8 mm lengthwise and cross
Concrete cover h´= 3 cm
Concrete quality class C25/30
IMPORTANT: The distance dimensions must be kept exactly!
800
600
800 800
346
1696
5596
450
4200 800 800
5000
3530
1700
5130
5800
4330
800
2500
5000
OHNE SCHRIFTLICHE ZUSTIMMUNG DER CONRADI+KAISER GMBH DARF DIESE
TECHNISCHE UNTERLAGE WEDER VERVIELFÄLTIGT, NOCH DRITTEN MITGETEILT ODER
ZUGÄNGLICH GEMACHT WERDEN, NOCH IN SONSTIGER WEISE MISSBRÄEUCHLICH VER-
WENDET WERDEN. ZUWIDERHANDLUNGEN WERDEN URHEBERRECHTLICH VERFOLGT.
1
Slackline lixus Dreieck
Benennung
Gepr.
Blatt
Datum
Projekt
Gez.
Zeichnungsnummer
1:35
A3
Name
Name
Fundamentplan
0308-00-00
Maßstab
Schramm 08.12.17
Gewerbegebiet Larsheck
56271 Kleinmaischeid
Deutschland
Beton
concrete
gewachsenes Erdreich
natural ground
Legende
stoßdämpfender Boden
shock-absorbing floor
DatumÄnderungRev
beliebiger Boden
optional floor
play level

© stilum GmbH, Gewerbegebiet Larsheck, D-56271 Kleinmaischeid • Tel. [phone] • All rights and product modications reserved
Mounting instructions for slackline „lixus“ triangle
Item No. 51 6510 404
state: 09.06.2020 p. 3
Diagram 3a: connection part xed side
B
C
B (1 : 5)
80mm Vorspannung
C (1 : 5)
OHNE SCHRIFTLICHE ZUSTIMMUNG DER CONRADI+KAISER GMBH DARF DIESE
TECHNISCHE UNTERLAGE WEDER VERVIELFÄLTIGT, NOCH DRITTEN MITGETEILT ODER
ZUGÄNGLICH GEMACHT WERDEN, NOCH IN SONSTIGER WEISE MISSBRÄEUCHLICH VER-
WENDET WERDEN. ZUWIDERHANDLUNGEN WERDEN URHEBERRECHTLICH VERFOLGT.
Oberflächen nach
DIN ISO 1302
Reihe 2
Zul. Abweichung
DIN 2768 - mH
1
Slackline 1A
Benennung
Gepr.
Werkstoff
Blatt
Datum
Projekt
Gez.
Zuschnitt
Zeichnungsnummer
Rev Änderung Datum
1:20
A3
Gewicht
Name
Name
Details
0307-00-00
148137.4 Maßstab
Schramm 24.11.17
Gewerbegebiet Larsheck
56271 Kleinmaischeid
Deutschland
B
C
B (1 : 5)
80mm Vorspannung
C (1 : 5)
OHNE SCHRIFTLICHE ZUSTIMMUNG DER CONRADI+KAISER GMBH DARF DIESE
TECHNISCHE UNTERLAGE WEDER VERVIELFÄLTIGT, NOCH DRITTEN MITGETEILT ODER
ZUGÄNGLICH GEMACHT WERDEN, NOCH IN SONSTIGER WEISE MISSBRÄEUCHLICH VER-
WENDET WERDEN. ZUWIDERHANDLUNGEN WERDEN URHEBERRECHTLICH VERFOLGT.
Oberflächen nach
DIN ISO 1302
Reihe 2
Zul. Abweichung
DIN 2768 - mH
1
Slackline 1A
Benennung
Gepr.
Werkstoff
Blatt
Datum
Projekt
Gez.
Zuschnitt
Zeichnungsnummer
Rev Änderung Datum
1:20
A3
Gewicht
Name
Name
Details
0307-00-00
148137.4 Maßstab
Schramm 24.11.17
Gewerbegebiet Larsheck
56271 Kleinmaischeid
Deutschland
Diagram 3b: connection part clamping device
Exactly 80 mm pretension (corresponds 120 kg under load)
80 mm pretension
Attention: The pre-mounted screws at the sides of the swivel appliance
should not be xed completely. It is necessary that it still can move!
Critical drop height: 350 mm
Recommended surface material: optional
The impact area must be free of any sharp-edged or dangerously protruding
parts.
8. Do not allow children to use the equipment before the installation has been
nished.
9. During the rst days of usage, it is possible that the rope elongates. A few
days after the rst use, check the ropes and if necessary re-stress the rope.
Note: We suggest to elongate the rope during winter with month below free-
zing point to prevent extra burdens to the foundations and the platforms.
Maximum load: 3x60 kg
Attention: If the play equipment has been incompletely installed or partly dis-
mantled when carrying out maintenance and repair work, this may lead to par-
ticular risks of injury for the user. For this reason, make clearly visible that the
equipment shall not be used in such cases.
NOTE: Play equipment, which contain components made of stainless steel
should not come with „normal“ steel parts in contact. Those steel parts may rub
o󰀨 and leave small steel particles in combination with moisture brown rust stains.
If such corrosion occur on stainless steel parts, they are ne with an abrasive
(240 grit) to remove. Please take care when transporting and setting up the fact
that the components are made of stainless steel with no „normal“ steel parts in
contact.

© stilum GmbH, Gewerbegebiet Larsheck, D-56271 Kleinmaischeid • Tel. [phone] • All rights and product modications reserved
Mounting instructions for slackline „lixus“ triangle
Item No. 51 6510 404
state: 09.06.2020 p. 4
In order to preserve a good visual appearance of your stilum playground equip-
ment over a long period one should take care of maintenance of the stainless
surface even despite of their corrosion resistance.
Especially areas, which can not be reached by rainfall should be frequent-
ly cleaned from dirt and deposits due to air pollution and dirt caused by the
atmosphere.
Light soiling can easily be romoved by using a high pressure cleaner.
For persistent deposits use a clean cloth moistened with a special liquid clea-
ner (e.g. on phosphoric acid) and rinse o󰀨 with clear water after a short appli-
cation time. During cleaning with mild abrasive components, only wipe over
stainless steel surface in polishing direction.
For heavily soiled surfaces, polishes can be used (e.g. for cleaning chrome on
cars) or for greasy and oily dirt alcoholic cleaning agents and solvents (e.g.
ethyl alcohol, isopropyl alcohol or acetone).
However, it should be noted that the dissolved soiling is not spread over the
surface again.
Do not use any chlorid or hydrochloric containing cleaning products nor scou-
ring powder, bleaching - or silver polish cleaner. Cleaning intervals depend on
type and degree of soiling as well as on demands made on optical characte-
ristics. Therefore cleaning is advisable at intervals of six to twelve months –
whereby in the case of strong soiling it is appropriate to clean the playground
equipment at intervals of three to six months.
8700
8000
1553
1802
OHNE SCHRIFTLICHE ZUSTIMMUNG DER CONRADI+KAISER GMBH DARF DIESE
TECHNISCHE UNTERLAGE WEDER VERVIELFÄLTIGT, NOCH DRITTEN MITGETEILT ODER
ZUGÄNGLICH GEMACHT WERDEN, NOCH IN SONSTIGER WEISE MISSBRÄEUCHLICH VER-
WENDET WERDEN. ZUWIDERHANDLUNGEN WERDEN URHEBERRECHTLICH VERFOLGT.
1
1x
Slackline lixus Dreieck
Benennung
Gepr.
Blatt
Datum
Projekt
Gez.
Zeichnungsnummer
Rev Änderung Datum
1:60
A3
Name
Name
Draufsicht
0308-00-00
Maßstab
Behnke 22.02.17
A Fallraum vergößert 26.07.18 SI
Gewerbegebiet Larsheck
56271 Kleinmaischeid
Deutschland
Diagram 4: Top view
Area of the mini-
mum space