stilum seta2 Robinie User manual

© stilum GmbH, Gewerbegebiet Larsheck, 56271 Kleinmaischeid • Tel. [phone] • Alle Rechte und Produktmodikationen vorbehalten
Mounting instructions for swing „seta2 Robinie“
Item No. 51 2025 601
State: 25.11.2015 p. 1
crossbeam
Pole
Diagram 1: Overall view of the play equipment

© stilum GmbH, Gewerbegebiet Larsheck, 56271 Kleinmaischeid • Tel. [phone] • Alle Rechte und Produktmodikationen vorbehalten
Mounting instructions for swing „seta2 Robinie“
Item No. 51 2025 601
State: 25.11.2015 p. 2
concrete foundations
Pfosten
crossbeam
swing seat
with chain
1. Select the play equipment location in consideration of the required safety area (see
Diagram 3: Ø 12965 mm).
2. The impact area of a playground equipment with an enforced movement is not allo-
wed to overlap the impact area of other equipment.
Regarding to DIN 1176 - 4.2.8.2.5, impact absorbing surfaces have to be put under
the whole impact area of every equipment with an enforced movement.
3. Carry out excavation work for 3 foundations as shown in Diagram 2. After excavation,
compress the foundation oor.
Note: The swing is built in on the play level. Pay attention to items marked „game
level“ of play equipment!
4. Screw the six swing bars onto the six poles as shown in Diagram 2.
5. Set up the concrete foundations acc. to the dimensions indicated (LxWxH 1400 x 600
x 500 mm) with central, horizontal reinforcement (BST 500 S) in the quality class B
5485
450
400
500
500 2760
2500
2200
600
1400
6600
6015
1075
1075
Beton
Concrete
Füllmaterial
Filling
Erde
Ground
KUNDE:
BESTELL-NR:
Seta
Fundament
ZG-NR:
BENENNUNG:
OHNE SCHRIFTLICHE ZUSTIMMUNG DER CONRADI + KAISER GMBH DARF DIESE TECHNISCHE UNTERLAGE WEDER VERVIELFÄLTIGT
NOCH DRITTEN MITGETEILT ODER ZUGÄNGLICH GEMACHT WERDEN NOCH IN SONSTIGER WEISE MISSBRÄEUCHLICH VERWENDET
WERDEN. ZUWIDERHANDLUNGEN WERDEN URHEBERRECHTLICH VERFOLGT.
06.08.2009
FREIG:
GEPR:
GEZ:
DATUM: NAME:
V. Bishop
WERKSTOFF / ROHMAß:
1:40
MAßSTAB:
OBERFLAECHEN NACH
DIN ISO 1302 REIHE 2
ZUL. ABWEICHUNG
DIN 2768 - mH
+0,3
-0,3
WERKSTUECKKANTEN
NACH DIN 6784
Gewerbegebiet Larsheck
56271 Kleinmaischeid
Deutschland
A3
500
950
450
6034
2651
2663 2473 2307
1841
424
OHNE SCHRIFTLICHE ZUSTIMMUNG DER CONRADI + KAISER GMBH DARF DIESE TECHNISCHE UNTERLAGE WEDER VERVIELFÄLTIGT
NOCH DRITTEN MITGETEILT ODER ZUGÄNGLICH GEMACHT WERDEN NOCH IN SONSTIGER WEISE MISSBRÄEUCHLICH VERWENDET
WERDEN. ZUWIDERHANDLUNGEN WERDEN URHEBERRECHTLICH VERFOLGT.

WERKSTOFF / ROHMAß:
MAßSTAB:
OBERFLAECHEN NACH
DIN ISO 1302 REIHE 2
ZUL. ABWEICHUNG
DIN 2768 - mH
WERKSTUECKKANTEN
NACH DIN 6784
+0,3
-0,3
FREIG:
GEPR:
GEZ:
DATUM: NAME:
Gewerbegebiet Larsheck
56271 Kleinmaischeid
Deutschland
BENENNUNG:
BESTELL-NR:
ZG-NR:
12.11.2012
Rev.:
KUNDE:
A4
Seta2 Fundament
Diagram 2: Side view with dimension details „seta2 Robinie“
5485
450
400
500
500 2760
2500
2200
600
1400
6600
6015
1075
1075
Beton
Concrete
Füllmaterial
Filling
Erde
Ground
KUNDE:
BESTELL-NR:
Seta
Fundament
ZG-NR:
BENENNUNG:
OHNE SCHRIFTLICHE ZUSTIMMUNG DER CONRADI + KAISER GMBH DARF DIESE TECHNISCHE UNTERLAGE WEDER VERVIELFÄLTIGT
NOCH DRITTEN MITGETEILT ODER ZUGÄNGLICH GEMACHT WERDEN NOCH IN SONSTIGER WEISE MISSBRÄEUCHLICH VERWENDET
WERDEN. ZUWIDERHANDLUNGEN WERDEN URHEBERRECHTLICH VERFOLGT.
06.08.2009
FREIG:
GEPR:
GEZ:
DATUM: NAME:
V. Bishop
WERKSTOFF / ROHMAß:
1:40
MAßSTAB:
OBERFLAECHEN NACH
DIN ISO 1302 REIHE 2
ZUL. ABWEICHUNG
DIN 2768 - mH
+0,3
-0,3
WERKSTUECKKANTEN
NACH DIN 6784
Gewerbegebiet Larsheck
56271 Kleinmaischeid
Deutschland
A3

© stilum GmbH, Gewerbegebiet Larsheck, 56271 Kleinmaischeid • Tel. [phone] • Alle Rechte und Produktmodikationen vorbehalten
Mounting instructions for swing „seta2 Robinie“
Item No. 51 2025 601
State: 25.11.2015 p. 3
20/25. Place the mounted swing into the foundations acc. to the dimensions indicated
in Diagram 2. Compress concrete!
6. Align swing in vertical and horizontal direction and keep it supported until the foun-
dations have bound off. Note: Make sure that the supported swing is not used for
playing.
7. After a setting period of 10-14 days, depending on weather conditions and foundation
size, seal the foundation with the safety cover required for the height of fall indica-
ted. Set up impact-absorbing playground surfacing according to EN 1177 HIC 1000.
Critical drop height: approx. 1400 mm
Recommended surface material: sand, bark mulch, gravel, synth. fall protection.
8. Screw the chains with the swing seats onto the swing suspension. Readjust the
screws on the swing bars. The jump protection has to show to the inside of the swing!
9. Do not allow children to use the equipment before the installation has been nished.
Attention: If the play equipment has been incompletely installed or partly dismantled
when carrying out maintenance and repair work, this may lead to particular risks of injury
for the user. For this reason, make clearly visible that the equipment shall not be used in
such cases.
NOTE: Play equipment, which contain components made of stainless steel should not
come with „normal“ steel parts in contact. Those steel parts may rub off and leave small
steel particles in combination with moisture brown rust stains.If such corrosion occur on
stainless steel parts, they are ne with an abrasive (240 grit) to remove.
Please take care when transporting and setting up the fact that the components are made
of stainless steel with no „normal“ steel parts in contact.
600
1400
1750
3895 3395
12965
OHNE SCHRIFTLICHE ZUSTIMMUNG DER CONRADI + KAISER GMBH DARF DIESE TECHNISCHE UNTERLAGE WEDER VERVIELFÄLTIGT
NOCH DRITTEN MITGETEILT ODER ZUGÄNGLICH GEMACHT WERDEN NOCH IN SONSTIGER WEISE MISSBRÄEUCHLICH VERWENDET
WERDEN. ZUWIDERHANDLUNGEN WERDEN URHEBERRECHTLICH VERFOLGT.
Seta2 Fundament
MAßSTAB:
Rev.:
KUNDE:
BESTELL-NR:
ZG-NR:
BENENNUNG:
FREIG:
GEPR:
GEZ:
NAME:
DATUM:
WERKSTOFF / ROHMAß:

ZUL. ABWEICHUNG
DIN 2768 - mH
OBERFLAECHEN NACH
DIN ISO 1302 REIHE 2
WERKSTUECKKANTEN
NACH DIN 6784
-0,3
+0,3
12.11.2012
Gewerbegebiet Larsheck
56271 Kleinmaischeid
Deutschland
A4
Diagram 3: Top view „seta2 Robinie“
Reinforcement plan: Concrete foundation with rein-
forcement
Main foundation: BSt 500S
Ever 4 stirrups Ø 8 mm lengthwise and cross
Concrete cover h´= 3 cm
Concrete quality class C 20/25

© stilum GmbH, Gewerbegebiet Larsheck, 56271 Kleinmaischeid • Tel. [phone] • Alle Rechte und Produktmodikationen vorbehalten
Mounting instructions for swing „seta2 Robinie“
Item No. 51 2025 601
State: 25.11.2015 p. 4
In order to preserve a good visual appearance of your stilum playground equip-
ment over a long period one should take care of maintenance of the stainless
surface even despite of their corrosion resistance.
Especially areas, which can not be reached by rainfall should be frequently clea-
ned from dirt and deposits due to air pollution and dirt caused by the atmosphere.
Light soiling can easily be romoved by using a high pressure cleaner.
For persistent deposits use a clean cloth moistened with a special liquid cleaner
(e.g. on phosphoric acid) and rinse off with clear water after a short application
time. During cleaning with mild abrasive components, only wipe over stainless
steel surface in polishing direction.
For heavily soiled surfaces, polishes can be used (e.g. for cleaning chrome on
cars) or for greasy and oily dirt alcoholic cleaning agents and solvents (e.g. ethyl
alcohol, isopropyl alcohol or acetone).
However, it should be noted that the dissolved soiling is not spread over the sur-
face again.
Do not use any chlorid or hydrochloric containing cleaning products nor scouring
powder, bleaching - or silver polish cleaner. Cleaning intervals depend on type
and degree of soiling as well as on demands made on optical characteristics.
Therefore cleaning is advisable at intervals of six to twelve months – whereby in
the case of strong soiling it is appropriate to clean the playground equipment at
intervals of 3 to six months.