
5
AUS
AFTER SALES SUPPORT
MODEL: TC936 PRODUCT CODE: 708322 3/2022
1300 112 534
tempo.org/support
General Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS
READ CAREFULLY AND KEEP FOR FUTURE REFERENCE
Read this manual thoroughly before first use, even if you are familiar with this
type of product. The safety precautions enclosed herein reduce the risk of fire,
electric shock and injury when correctly adhered to. Keep the manual in a safe
place for future reference, along with the completed warranty card, purchase
receipt and packaging carton. If applicable, pass these instructions on to the
next owner of the appliance.
Always follow basic safety precautions and accident prevention measures
when using an electrical appliance, including the following:
Electrical safety and cord handling
• Correct voltage: Make sure your local outlet voltage and circuit frequency
correspond to the voltage indicated on the appliance rating label. If it does not
match, do not use the appliance and contact our after sales support centre.
• Do not immerse: To protect against electric shock, do not immerse the cord,
plug or the whole appliance in water or other liquid. Only clean these parts
with a damp cloth; never wash the outer housing in or under running water.
If the appliance is accidentally immersed, or liquid is spilled into the controls,
immediately unplug the appliance, dry it and have it checked by qualified
service personnel.
• Moisture: Ensure your hands are dry before handling the plug or switching on.
• Protect the power cord: Unwind the power cord fully before use. Do not kink,
bend, strain or damage the cord and protect it from sharp edges and heat. Do
not let the cord hang over the edge of a table or benchtop; do not let it touch
hot surfaces. Do not place anything on top of the cord. Do not wrap it around
the appliance, and never pull the cord to lift up, carry or unplug the appliance.
• No extension cord: Do not use this appliance with an extension cord.
• Damaged power cord: Check the power supply cord regularly for visible
damage. A damaged cord must be replaced by the manufacturer, its authorised
service centres or similarly qualified personnel in order to avoid any hazards.
• Do not use when damaged: Do not pick up or operate an appliance with
a damaged cord or plug, or after the appliance malfunctions or has been
dropped or damaged in any manner. In case of damage, contact our after
sales support centre for advice.
• Connection: Before connection, ensure all controls are set to OFF and the
appliance is properly assembled. Then insert the electrical plug into the wall
outlet and switch on the power at the outlet.