Stirling STR-FL90 User manual

Installing the machine
Let’s get your new front load
washing machine ready to use!
Quick Start Guide
Model: STR-FL90
Preparation
Washing
1
1
6
2
2
7
3
3
8
4
4
Temp. Spi n
Speed +Rinse
Delay
Star t
5
5
7
B
C
Plug in the machine.
Open your water tap.
Load your washing into the machine
- page 23 in the instruction manual has
useful hints to help you with this.
Close the door.
Add detergent to the drawer – nd all the
details on page 19 in the instruction manual.
Select a program – all program details are
provided on page 20 in the instruction manual.
Press an option button if you want to adjust
the water temperature, spin speed, number of
rinses, or set a delay start.
Press the Start/Pause button to start up.
CAUTION! This washing machine is extremely heavy – transport it with care! A team lift or
mechanical aid is required when moving it.
WARNING! Before installing the washing machine, you must remove the transport bolts from the
back of the housing and cover the holes with the transport hole plugs provided. The four bolts
hold the drum in place during transport but they must be removed before use so the drum can
move during the wash and spin cycles.
This washing machine must be installed by a competent person. Installation involves removing the
transport bolts, levelling the machine, connecting it to your cold water supply and installing the
drain hose. Please refer to pages 10-15 in the instruction manual for comprehensive instructions.
A
Nearly done! Just a bit more on the other
side of this page ...
6
8

Give us a call
What? You mean this Quick Start Guide didn’t have ALL the answers? The manual has more
comprehensive instructions, or speak to us. Call our After Sales Support on 1300 886 649.
Well done, you made it! Now sit back and relax ... your new front load washing
machine is automatically covered by a 3 year warranty. V1.0
10
11
12
9
The washing machine is equipped with 15 programs, 1400rpm spin speed, LED display, delay start and an add-
a-garment function.
Wash programs
E
When the buzzer sounds you can open the door and
take your washing out of the machine. The machine
will automatically turn to stand-by.
Unplug the power plug.
Close the water tap.
We recommend you leave the door slightly ajar so
the drum can dry properly and to prevent mould
and odour development.
Afterwards D
10
Program dial: Turn the program dial to switch on the
machine and select your desired wash program.
Stand-by position: The machine switches to stand-by
automatically at the end of the program.
LED display: Shows the settings, estimated time
remaining, options, codes, etc.
Temp. button: Press to adjust a program’s default
temperature (if available). Press and hold this button to
set the child lock function.
Spin Speed button: Press to adjust a program’s
default spin speed (if available). Press and hold
this button for at least 3 seconds to mute the
buzzer.
+Rinse button: Press to add an additional
rinse (if available).
Delay Start button: Press to set the delay
function (up to a maximum of 24 hours).
Start/Pause button: Press to start the
program or to pause it.
9
11 12