Stirling SFLW75 User manual

Issue Date: 07/2020IM Version No.: V1.0
MODEL NUMBER SFLW75
INSTRUCTION MANUAL
7.5KG FRONT LOAD
WASHING MACHINE

32 MODEL: SFLW75 | PRODUCT CODE: 701331 | 07/2020MODEL: SFLW75 | PRODUCT CODE: 701331 | 07/2020
Congratulations on choosing to buy a STIRLING® product.
All products brought to you by STIRLING® are manufactured to the highest standards
of performance and safety and, as part of our philosophy of customer service and
satisfaction, are backed by our comprehensive 3 Year In Home Warranty. We hope you
will enjoy using your purchase for many years to come.
Welcome Contents
02 Welcome
05 Warranty Details
06 Safety Instructions
10 Product Overview
11 Quick Start Guide
12 Operating the Appliance
16 Cleaning and Maintenance
18 Troubleshooting
20 Other Useful Information
21 Repair and Refurbished Goods or Parts Notice

54 MODEL: SFLW75 | PRODUCT CODE: 701331 | 07/2020MODEL: SFLW75 | PRODUCT CODE: 701331 | 07/2020
This page
is intentionally
left blank
The product is guaranteed to be free from defects in workmanship and parts for a period
of 36 months from the date of purchase. Defects that occur within this warranty period,
under normal use and care, will be repaired, replaced or refunded at our discretion. The
benets conferred by this warranty are in addition to all rights and remedies in respect of
the product that the consumer has under the Competition and Consumer Act 2010 and
similar state and territory laws.
Our goods come with guarantees that cannot be excluded under the Australian Consumer
Law. You are entitled to a replacement or refund for a major failure and for compensation
for any other reasonably foreseeable loss or damage. You are also entitled to have the
goods repaired or replaced if the goods fail to be of acceptable quality and the failure does
not amount to a major failure.
7.5kg Front Load Washing Machine
Congratulations!
REGISTER YOUR PURCHASE AT www.aldi.com.au/en/about-aldi/product-registration/ TO KEEP UP-TO-DATE WITH IMPORTANT PRODUCT INFORMATION
You have made an excellent choice of this quality product. Our commitment to quality also includes our service. Should you, contrary to
expectations, experience defects due to manufacturing faults, ALDI will provide you with a warranty against defects as follows:
Warranty
The product is guaranteed to be free from defects in workmanship and parts for a period of 36 months from the date of purchase. Defects that occur within this
warranty period, under normal use and care, will be repaired, replaced or refunded at our discretion. The benefits conferred by this warranty are in addition to
all rights and remedies in respect of the product that the consumer has under the Competition and Consumer Act 2010 and similar state and territory laws.
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure
and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of
acceptable quality and the failure does not amount to a major failure.
Proof of Purchase
This warranty is valid for the original purchase and is not transferable. Please keep your purchase docket, tax invoice or receipt as the best proof of purchase, and
as proof of date on which the purchase was made.
Extent of Warranty
This warranty is limited to defects in workmanship or parts. All defective products or parts will be repaired or replaced.
Normal Wear and Tear
This warranty does not cover normal wear and tear to the products or parts.
118 Campbell Street, Collingwood, VIC 3066
Exclusions
This warranty does not cover:
• Any defects caused by an accident, misuse, abuse, improper installation or operation, lack of reasonable care, unauthorised modification, loss of parts,
tampering or attempted repair by a person not authorised by the distributor.
• Any product that has not been installed, operated or maintained in accordance with the manufacturer’s operating instructions provided with the product.
• Any product that has been used for purposes other than domestic use.
• Any damage caused by improper power input or improper cable connection.
To Make a Claim
This warranty against defects is provided by ALDI Stores, Locked Bag 56, St Marys Delivery Centre, NSW 2760, Phone [phone]. If a defect in the goods
appears within 36 months, you are entitled to claim a warranty, please contact or send all warranty claims to:
When making a return, please ensure the product is properly packaged so as to ensure that no damage occurs to the product during transit.
Please provide the original or a copy of the proof of purchase. Also please make sure you have included an explanation of the problem.
Please note that the costs of making a warranty claim, including any return postage, will be covered by the supplier identified above.
Please note upon receiving your warranty claim, the supplier will send, via the post or email, a repair and refurbished goods
or parts notice.
Please provide your email address and advise the supplier, if you wish to obtain a repair and refurbished goods or
parts notice via email.
AFTER SALES SUPPORT:
1300 11 4357
AUS
3
Hotline number: 1300 11 4357
Residentia Group Pty Ltd
Email: [email protected]
[email protected]
MODEL: SUC54EEW PRODUCT CODE: 62878 11/2018
IN HOME

76 MODEL: SFLW75 | PRODUCT CODE: 701331 | 07/2020MODEL: SFLW75 | PRODUCT CODE: 701331 | 07/2020
Safety Instructions Safety Instructions (Cont.)
GENERAL WARNINGS
Before the installation and use of the appliance, carefully
read the supplied instructions.
The manufacturer is not responsible if an incorrect
installation and use causes injuries and damages.
Always keep the instructions with your appliance for
future reference.
WARNING!
To prevent any loss of life, injury or damage to property,
follow the safety notes.
WARNING!
Caution, risk of re!
This appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person
responsible for their safety.
Children should be supervised to ensure that they do not
play with the appliance.
Before the installation and use of the appliance, carefully
read the supplied instructions.
The manufacturer is not responsible if an incorrect
installation and use causes injuries and damages.
Always keep the instructions with your appliance for
future reference.
CONDITIONS OF USE
This appliance is intended to be used in household and
similar applications such as farm houses or by clients
in serviced apartments, holiday apartments and other
residential type environments.
UNPACKING
During transportation, protective packaging was used
to protect the appliance against any damage. After
unpacking, please dispose of all elements of packaging
in a way that will not cause damage to the environment.
All materials used for packaging the appliance are
environmentally friendly; they are 100% recyclable and
are marked with the appropriate symbol.
CAUTION!
During unpacking, the packaging materials (polythene
bags, polystyrene pieces, etc.) should be kept out of
reach of children.
DISPOSAL OF THE APPLIANCE
Old appliances should not simply be disposed of with
normal household waste, but should be delivered
to a collection and recycling centre for electric and
electronic equipment. A symbol shown on the product,
the instruction manual or the packaging shows that it is
suitable for recycling.
Materials used inside the appliance are recyclable
and are labelled with information concerning this. By
recycling materials or other parts from used devices you
are making a signicant contribution to the protection of
our environment.
Information on appropriate disposal centres for used
devices can be provided by your local authority.
• Disconnect the appliance from the mains supply.
• Cut o the mains cable and discard it.
• Remove the door catch to prevent children and pets
to get closed in the appliance.
INSTALLATION
• Remove all the packaging and transport bolts before
using the appliance otherwise you risk damaging
the appliance.
• This washing machine is for indoor use only
• Do not install or use a damaged appliance.
• Make sure that the oor where you install the
appliance is at, stable, heat resistant and clean.
• Always remove the plug and turn o the water
supply to the appliance after every use.
• Sharp and rigid items such as coins, nails and
screws may cause serious damage to this
appliance- always ensure pockets of clothing are
empty.
• Always ensure that the drum has drained all water
before opening the appliance door. If water is visible,
do not open the appliance door.
• Do not install the appliance behind a lockable door,
a sliding door or a door with a hinge on the
opposite side, where the appliance door cannot be
fully opened.
• Always be careful when you move the appliance
because it is heavy. Always wear safety gloves.
• Always move the appliance vertically.
• The rear surface of the appliance must be put
against the wall.
• This appliance should not be installed in a bathroom
or similar wet rooms, as well as rooms with explosive
or caustic gases.
• Washing machines with a single water inlet and
should only be connected to the cold water supply
outlet. Models featuring two inlet valves can be
connected to both the hot and cold water outlets.
• The appliance is not intended for built in use.
• Plug must be accessible after installation.
• When the appliance is put in its permanent position,
check if it is fully level with the aid of a spirit level. If
it is not, adjust the feet until it is.
APPLIANCE USE
WARNING!
Risk of re, explosion, electric shock or damage to
the appliance.
• Use this appliance in a household only.
• Before operating this appliance, ensure that all
packaging and transport bolts have been removed.
Otherwise, serious damage can occur to the
appliance.
• Before washing any clothes for the rst time, the
washing machine should be operated for one whole
cycle without any clothes inside.
• Do not climb up or sit on top of the appliance.
• Do not change the specication of this appliance.
• If you use fabric softener or similar products, obey
the instructions on the packaging.
• Do not sit or stand on the open door.
• Obey the maximum load volume of 7.5 kg
(refer to the “Program chart” chapter).
• Ensure all objects are removed from clothing
pockets such as lighters and matches.
• Please only use front load washing machine
detergents. Flammable and explosive or toxic
solvents are forbidden for use with this appliance.
Gasoline and alcohol should not be used as a
detergent.
• Never wash carpets or rugs within the appliance.
• Be careful to avoid burns when the machine drains
hot washing water.
• After a wash program completes, please wait two
minutes before opening the door.
• If a tumble dryer is installed on top of the washing
machine, use the suitable stacking kit. The stacking
kit, available from your authorized vendor, can
be used only with the appliance specied in the
instructions, supplied with the accessory. Read it
carefully before installation (Refer to the Installation
leaet).
• Never lean against the machine door.
• Please do not close the machine door with
excessive force and if you nd it dicult to close the
door, ensure that the clothing load isn’t excessive.
TRANSPORT
• Always move the appliance cautiously.
Do not use the machine door or the handle of the
detergent dispenser, to lift the appliance.
• Transportation bolts should be reinstalled within
the machine by a specialised person, prior to
transporting the appliance.
• Ensure that all accumulated water is drained from
the appliance before moving.
ELECTRICAL CONNECTION
WARNING!
Caution, risk of re and electrical shock!
• The appliance must be earthed.
• Make sure that the electrical information on the
rating plate agrees with the power supply. If not,
contact an electrician.
• Always use a correctly installed shockproof socket.
• Do not use multi-plug adapters and extension cables.
• Make sure not to cause damage to the mains plug
and to the mains cable. Should the appliance power
supply cable need to be replaced, this must be
carried out by our Service Centre.
• Connect the mains plug to the mains socket only at
the end of the installation. Make sure that there is
access to the mains plug after the installation.
Do not connect the appliance plug with a power
connection board.
• Do not pull the mains cable to disconnect the
appliance. Always pull the mains plug.
• Do not touch the mains cable or the mains plug with
wet hands.
• This appliance complies with the E.E.C. Directives.
CARE & CLEANING
WARNING!
Caution, risk of injury or damage to the appliance.
• Before maintenance, deactivate the appliance and
disconnect the mains plug.
• Do not use water spray and steam to clean the
appliance.
• Clean the appliance with a moist soft cloth. Only use
neutral detergents. Do not use abrasive products,
abrasive cleaning pads, solvents or metal objects.
INSTALLATION POSITIONING
Ensure that your appliance is installed on solid and at
ground, in a level position.
Please do not place the appliance on a slope, soft
carpet or wooden oor.
The appliance is not intended for built in use.
Do not install the appliance outdoors.
Installation
Before installing the machine, the location characterized
follows shall be selected:
1.Rigid, dry, and level surface
2.Avoid direct sunlight
3.Sufficient ventilation
4.Room temperature is above 0℃
5.Keep far away from the heat resources such as coal or gas.
as
Unpacking the washing machine
1. Remove the cardboard box and styrofoam packing.
2. Lift the washing machine and remove the base packing.
3. Remove the tape securing the power supply cord and drain hose.
4. Remove the inlet hose from the drum.
Make sure the small triangle
foam is removed with the bottom one together. If not, lay the unit down with side
surface, then remove the small foam from the unit bottom manually.
Please take the following steps to remove the bolts:
1.Loosen 4 bolts with spanner and then remove them.
2.Stop the holes with transport hole plugs.
3.Keep the transport bolts properly for future use.
Remove transport bolts
•
•
Stability is important to prevent the product from
wandering!
Make sure that the product should not stand on
the power cord.
Warning!
！！
•
•
Packaging material (e.g. Films, Styrofoam) can be
dangerous for children.
There is a risk of suffocation ! Keep all packaging
well away from children.
Warning!
！！
•
• product
you
You must remove the transport bolts from the backside before using the product.
You’ll need the transport bolts again if you move the , so make sure
keep them in a safe place.
Warning!
！！
8
INSTALLATION
w
w
W> 20mm
Installation area
Installation
Before installing the machine, the location characterized
follows shall be selected:
1.Rigid, dry, and level surface
2.Avoid direct sunlight
3.Sufficient ventilation
4.Room temperature is above 0℃
5.Keep far away from the heat resources such as coal or gas.
as
Unpacking the washing machine
1. Remove the cardboard box and styrofoam packing.
2. Lift the washing machine and remove the base packing.
3. Remove the tape securing the power supply cord and drain hose.
4. Remove the inlet hose from the drum.
Make sure the small triangle
foam is removed with the bottom one together. If not, lay the unit down with side
surface, then remove the small foam from the unit bottom manually.
Please take the following steps to remove the bolts:
1.Loosen 4 bolts with spanner and then remove them.
2.Stop the holes with transport hole plugs.
3.Keep the transport bolts properly for future use.
Remove transport bolts
•
•
Stability is important to prevent the product from
wandering!
Make sure that the product should not stand on
the power cord.
Warning!
！！
•
•
Packaging material (e.g. Films, Styrofoam) can be
dangerous for children.
There is a risk of suffocation ! Keep all packaging
well away from children.
Warning!
！！
•
• product
you
You must remove the transport bolts from the backside before using the product.
You’ll need the transport bolts again if you move the , so make sure
keep them in a safe place.
Warning!
！！
8
INSTALLATION
w
w
W> 20mm
Installation area

98 MODEL: SFLW75 | PRODUCT CODE: 701331 | 07/2020MODEL: SFLW75 | PRODUCT CODE: 701331 | 07/2020
Safety Instructions (Cont.) Safety Instructions (Cont.)
REMOVING THE TRANSPORTATION BOLTS
Before using this washing machine, transport bolts
must be removed from the backside of this machine.
Please take the following steps to remove the bolts:
• Loosen all bolts with a spanner and then
remove them.
• Use the plugs (supplied) to plug the holes.
• Keep the transport bolts for future use.
LEVEL ADJUSTING
• If the oor is obviously uneven, your appliance feet
need to be adjusted. If your appliance isn’t level, it
will cause your appliance to vibrate, and potentially
move from its position.
• Once you’ve positioned your washing machine,
press down from the top in all four corners to
ensure that it’s completely stable (i.e. not rocking in
any direction). Also use a spirit level to ensure that it
is completely level in all directions.
• Should you need to make adjustments, use a
spanner to turn the appliance legs until it makes
contact with the oor. Turn the leg using one hand
and then fasten the nut up against the appliance
cabinet, to lock the leg in place.
• After making any adjustments to the appliance legs,
re-check to ensure it is level and no rocking
occurring.
CONNECTING WATER SUPPLY HOSE
• Do not kink, crush, modify or sever the water inlet
hose
• For the model with hot valve, connect it to hot
water tap with hot water supply hose. Energy
consumption will decrease automatically for some
programs.
Connect the inlet pipe as indicated, There are two ways
to connect the inlet pipe.
1. Connection between ordinary tap and inlet hose.
2. Connection
between
screw tap
and inlet
hose.
Connect the inlet pipe to the inlet valve at the backside
of the product and fasten the pipe tightly clockwise.
THE DRAIN HOSE
Before using this washing machine, transport bolts must be removed from the backside of this machine.
Please take the following steps to remove the bolts:
• Loosen all bolts with a spanner and then
remove them.
• Use the plugs (supplied) to plug the holes.
• Keep the transport bolts for future use.
OPERATION IN CASE OF EMERGENCY
In the event of an emergency you should:
• Switch o washing machine power
• Switch the machine o at the isolation switch or at the fuse box.
• Call the After Sales Support Team on: 1300 11 HELP (4357)
Some minor faults can be xed by referring to the instructions given in the Troubleshooting section
of this manual.
1.Check if the legs are closely attached to the cabinet. If not, please turn them to
their original positions tighten the nuts.
2.Loosen the lock nut turn the feet until it closely contacts with the floor.
3.Adjust the legs and lock them with a spanner, make sure the machine is steady.
Levelling the washing machine
• The lock nuts on all four feet must be screwed tightly against the housing.
Connect Water Supply Hose
Connect the inlet pipe as indicated, There are two ways to connect the inlet pipe.
1.Connection between ordinary tap and inlet hose.
• To prevent leakage or water damage, follow the instructions in this chapter
Do not kink, crush, modify or sever .
!
• water inlet hose
• For the model equips hot valve,connect it to hot water tap with hot water supply
hose. Energy consumption will decrease automatically for some program.
234 1
Raise
Lower
Lock nut
foot
Warning!
！！
Warning!
！！
9
9
INSTALLATION
Loosen clamp nut and
four bolts
Tighten clamp nut Press slide bushing,
insert inlet hose into
connecting base
slide bushing
2341
Connection finished
clamp nut
Tap with threads and inlet hose Special tap for washing machine
2.Connection between screw tap and inlet hose.
slide bushing
1.Check if the legs are closely attached to the cabinet. If not, please turn them to
their original positions tighten the nuts.
2.Loosen the lock nut turn the feet until it closely contacts with the floor.
3.Adjust the legs and lock them with a spanner, make sure the machine is steady.
Levelling the washing machine
• The lock nuts on all four feet must be screwed tightly against the housing.
Connect Water Supply Hose
Connect the inlet pipe as indicated, There are two ways to connect the inlet pipe.
1.Connection between ordinary tap and inlet hose.
• To prevent leakage or water damage, follow the instructions in this chapter
Do not kink, crush, modify or sever .
!
• water inlet hose
• For the model equips hot valve,connect it to hot water tap with hot water supply
hose. Energy consumption will decrease automatically for some program.
234 1
Raise Lower
Lock nut
foot
Warning!
！！
Warning!
！！
9
9
INSTALLATION
Loosen clamp nut and
four bolts
Tighten clamp nut Press slide bushing,
insert inlet hose into
connecting base
slide bushing
2341
Connection finished
clamp nut
Tap with threads and inlet hose Special tap for washing machine
2.Connection between screw tap and inlet hose.
slide bushing
1.Check if the legs are closely attached to the cabinet. If not, please turn them to
their original positions tighten the nuts.
2.Loosen the lock nut turn the feet until it closely contacts with the floor.
3.Adjust the legs and lock them with a spanner, make sure the machine is steady.
Levelling the washing machine
• The lock nuts on all four feet must be screwed tightly against the housing.
Connect Water Supply Hose
Connect the inlet pipe as indicated, There are two ways to connect the inlet pipe.
1.Connection between ordinary tap and inlet hose.
• To prevent leakage or water damage, follow the instructions in this chapter
Do not kink, crush, modify or sever .
!
• water inlet hose
• For the model equips hot valve,connect it to hot water tap with hot water supply
hose. Energy consumption will decrease automatically for some program.
234 1
Raise Lower
Lock nut
foot
Warning!
！！
Warning!
！！
9
9
INSTALLATION
Loosen clamp nut and
four bolts
Tighten clamp nut Press slide bushing,
insert inlet hose into
connecting base
slide bushing
2341
Connection finished
clamp nut
Tap with threads and inlet hose Special tap for washing machine
2.Connection between screw tap and inlet hose.
slide bushing
1.Check if the legs are closely attached to the cabinet. If not, please turn them to
their original positions tighten the nuts.
2.Loosen the lock nut turn the feet until it closely contacts with the floor.
3.Adjust the legs and lock them with a spanner, make sure the machine is steady.
Levelling the washing machine
• The lock nuts on all four feet must be screwed tightly against the housing.
Connect Water Supply Hose
Connect the inlet pipe as indicated, There are two ways to connect the inlet pipe.
1.Connection between ordinary tap and inlet hose.
• To prevent leakage or water damage, follow the instructions in this chapter
Do not kink, crush, modify or sever .
!
• water inlet hose
• For the model equips hot valve,connect it to hot water tap with hot water supply
hose. Energy consumption will decrease automatically for some program.
234 1
Raise Lower
Lock nut
foot
Warning!
！！
Warning!
！！
9
9
INSTALLATION
Loosen clamp nut and
four bolts
Tighten clamp nut Press slide bushing,
insert inlet hose into
connecting base
slide bushing
2341
Connection finished
clamp nut
Tap with threads and inlet hose
Special tap for washing machine
2.Connection between screw tap and inlet hose.
slide bushing
1.Check if the legs are closely attached to the cabinet. If not, please turn them to
their original positions tighten the nuts.
2.Loosen the lock nut turn the feet until it closely contacts with the floor.
3.Adjust the legs and lock them with a spanner, make sure the machine is steady.
Levelling the washing machine
• The lock nuts on all four feet must be screwed tightly against the housing.
Connect Water Supply Hose
Connect the inlet pipe as indicated, There are two ways to connect the inlet pipe.
1.Connection between ordinary tap and inlet hose.
• To prevent leakage or water damage, follow the instructions in this chapter
Do not kink, crush, modify or sever .
!
• water inlet hose
• For the model equips hot valve,connect it to hot water tap with hot water supply
hose. Energy consumption will decrease automatically for some program.
234 1
Raise Lower
Lock nut
foot
Warning!
！！
Warning!
！！
9
9
INSTALLATION
Loosen clamp nut and
four bolts
Tighten clamp nut Press slide bushing,
insert inlet hose into
connecting base
slide bushing
2341
Connection finished
clamp nut
Tap with threads and inlet hose Special tap for washing machine
2.Connection between screw tap and inlet hose.
slide bushing
1.Check if the legs are closely attached to the cabinet. If not, please turn them to
their original positions tighten the nuts.
2.Loosen the lock nut turn the feet until it closely contacts with the floor.
3.Adjust the legs and lock them with a spanner, make sure the machine is steady.
Levelling the washing machine
• The lock nuts on all four feet must be screwed tightly against the housing.
Connect Water Supply Hose
Connect the inlet pipe as indicated, There are two ways to connect the inlet pipe.
1.Connection between ordinary tap and inlet hose.
• To prevent leakage or water damage, follow the instructions in this chapter
Do not kink, crush, modify or sever .
!
• water inlet hose
• For the model equips hot valve,connect it to hot water tap with hot water supply
hose. Energy consumption will decrease automatically for some program.
234 1
Raise
Lower
Lock nut
foot
Warning!
！！
Warning!
！！
9
9
INSTALLATION
Loosen clamp nut and
four bolts
Tighten clamp nut Press slide bushing,
insert inlet hose into
connecting base
slide bushing
2341
Connection finished
clamp nut
Tap with threads and inlet hose Special tap for washing machine
2.Connection between screw tap and inlet hose.
slide bushing
Installation
Before installing the machine, the location characterized
follows shall be selected:
1.Rigid, dry, and level surface
2.Avoid direct sunlight
3.Sufficient ventilation
4.Room temperature is above 0℃
5.Keep far away from the heat resources such as coal or gas.
as
Unpacking the washing machine
1. Remove the cardboard box and styrofoam packing.
2. Lift the washing machine and remove the base packing.
3. Remove the tape securing the power supply cord and drain hose.
4. Remove the inlet hose from the drum.
Make sure the small triangle
foam is removed with the bottom one together. If not, lay the unit down with side
surface, then remove the small foam from the unit bottom manually.
Please take the following steps to remove the bolts:
1.Loosen 4 bolts with spanner and then remove them.
2.Stop the holes with transport hole plugs.
3.Keep the transport bolts properly for future use.
Remove transport bolts
•
•
Stability is important to prevent the product from
wandering!
Make sure that the product should not stand on
the power cord.
Warning!
！！
•
•
Packaging material (e.g. Films, Styrofoam) can be
dangerous for children.
There is a risk of suffocation ! Keep all packaging
well away from children.
Warning!
！！
•
• product
you
You must remove the transport bolts from the backside before using the product.
You’ll need the transport bolts again if you move the , so make sure
keep them in a safe place.
Warning!
！！
8
INSTALLATION
w
w
W> 20mm
Installation area
Warning!
！！
10
Drain Hose
There are two ways to place the end of drain hose:
1.Put it into the water trough. 2.Connect it to the branch drain pipe of
the trough.
•
• If drain hose is too long, do not force it into washing machine as it will cause
abnormal noises.
When installing drain hose, fix it properly with a rope.
•
• Position drain hose properly ,otherwise damage might result of water leakage.
Do not kink or protract the drain hose.
Water
trough
Min.60cm
100cm
Max.
Trough
Hose Retainer
Bind
Max.100cm
Min.60cm
Min.60cm
Max.100cm
If the machine has • drain hose support, please install it like the following .
Warning!
！！Warning! ！！
Note!
10
INSTALLATION
water supply hose
water Inlet valve
Connect the other end of inlet pipe to the inlet valve at the backside of product
and fasten the pipe tightly clockwise.
Warning!
！
！
10
Drain Hose
There are two ways to place the end of drain hose:
1.Put it into the water trough. 2.Connect it to the branch drain pipe of
the trough.
•
• If drain hose is too long, do not force it into washing machine as it will cause
abnormal noises.
When installing drain hose, fix it properly with a rope.
•
• Position drain hose properly ,otherwise damage might result of water leakage.
Do not kink or protract the drain hose.
Water
trough
Min.60cm
100cm
Max.
Trough
Hose Retainer
Bind
Max.100cm
Min.60cm
Min.60cm
Max.100cm
If the machine has • drain hose support, please install it like the following .
Warning!
！
！
Warning!
！
！
Note!
10
INSTALLATION
water supply hose
water Inlet valve
Connect the other end of inlet pipe to the inlet valve at the backside of product
and fasten the pipe tightly clockwise.

1110 MODEL: SFLW75 | PRODUCT CODE: 701331 | 07/2020MODEL: SFLW75 | PRODUCT CODE: 701331 | 07/2020
Quick Start GuideProduct Overview
THE APPLIANCE
Means must ○ Means optional
• As for the agglomerated or ropy detergent or additive, before they are poured
the detergent box, it is suggested to use some water for dilution to prevent inlet
of detergent box from being blocked and overflowing while filling water.
•
into
the
Please choose suitable type of detergent for the various washing temperature to get
the best washing performance with less water and energy consumption.
Note!
10
14
OPERATIONS
Programme
Cotton Eco 40 °C
Cotton Eco 60 °C
Cotton
Cotton 20 °C
Cotton 30 °C
Cotton 40 °C
Cotton 60 °C
Cotton 90 °C
Synthetic
Synthetic 40 °C
Synthetic 60 °C
Drum Clean
Programme
Spin Only
Drain Only
Rinse&Spin
Delicate 30 °C
Delicate
Mix 60 °C
Mix 40 °C
Mix
Daily Wash 45'
Daily Wash 30'
Daily Wash 15'
Model:MFE60-S1208/A07E-AU(25)/MFE75-S1208/A07E-AU(25)
Water supply hose
Detergent Drawer
Door
Power supply cord
Top cover
Control panel
Drum
Drain hose
Service lter
O Start / Pause
Program Selection
Delay
Extra Rinse
Child Lock
Spin Speed
Product is switched o Press the button to start
or pause the wash cycle
Turn the dial to select
your desired wash cycle
Required Optional
Means must ○ Means optional
Detergent Dispenser
Pre wash detergent
Main wash detergent
Softener
II
I
Pull out the dispenser
Liquid detergent Powder detergent
Caution!
• Detergent only need to be added in "case I “after selecting pre-washing
for machines with this function.
10
13
OPERATIONS
Dam-board Dam-board
Programme
Cotton Eco 40 °C
Cotton Eco 60 °C
Cotton
Cotton 20 °C
Cotton 30 °C
Cotton 40 °C
Cotton 60 °C
Cotton 90 °C
Synthetic
Synthetic 40 °C
Synthetic 60 °C
Drum Clean
Programme
Spin Only
Drain Only
Rinse&Spin
Delicate 30 °C
Delicate
Ends in 9H
Ends in 6H
Ends in 3H
Daily Wash 45'
Daily Wash 30'
Daily Wash 15'
Model:MFE50-S1202/A07-AU(2) MFE60-S1202/A07-AU(25) MFE75-S1202/A07-AU(25)
QUICK START
CAUTION!
• Before washing, please make sure it’s installed
properly.
• Before washing at rst time, the washing machine
must run through one whole cycle without clothes.
Before washing
• Plug in the power supply
• Open the tap
• Load your washing
• Close the door
• Add detergent according to your load type
and volume.
Washing
• Power on
• Select Program
• Select additional functions if desired
• Please the Start / Pause button to begin your cycle.

1312 MODEL: SFLW75 | PRODUCT CODE: 701331 | 07/2020MODEL: SFLW75 | PRODUCT CODE: 701331 | 07/2020
Operating the Appliance
PREPARATION BEFORE WASHING YOUR CLOTHES
Please follow these steps carefully to avoid trouble with
your washing machine and damaging your clothing.
Washing Considerations
• New clothes in particular, can leach colour onto
other clothing items, particularly whites.
Consider washing these and bright colours
separately.
• Stained clothing should be treated with a stain
remover, prior to washing.
• Temperature sensitive clothes should be washed
in accordance with their care direction label.
Otherwise distortion and/or changes in colour could
occur.
• Never allow washing to sit in the machine for a long
period of time- particularly when wet. Clothes can
become mouldy and develop an odour.
• Certain clothing cannot be washed in a washing
machine and their care directions may state dry
cleaning or hand washing required.
• Wrinkle style clothes, embossed clothes, resin
clothes, etc may become distorted when immersed
in water.
• Avoid washing clothes without care direction labels
within the appliance, to be safe.
• Always remove all items from clothing pockets, as
hard items can cause damage to the appliance.
• Try to wash clothing colours and sizes in like loads,
as this will improve the eectiveness of the washing
and results.
• Close all clothing zips and ensure all buttons are
fastened securely.
• Delicate items such as bras, handkerchiefs and ties
should be washed within a special washing bag, to
prevent damage to themselves and other clothes.
• When washing a large single item that could
become heavy (i.e. a towel or jacket), it can cause
the appliance to become unbalance during its spin
cycle. Therefore it’s recommended to add one
or two more clothing items to help the machine
balance.
• Try to remove any pet hair, dust and stains from
clothing prior to washing.
• Baby clothing should be washed separately.
• Clothing that gets easily “fuzzed” or loses bers
easily, should be washed separately.
• Black clothing items should be washed separately.
• Do not wash waterproof materials within the
washing machine.
PAY ATTENTION TO DETERGENTS
WARNING!
Always keep detergents and additives out of reach
from children.
• Only use suitable front load washing machine
detergents with this appliance. Powders and liquid
detergents only.
• Only ever use the recommended quantity of
detergent, as per the manufacturer’s guidelines, as
an excessive quantity can cause excessive bubbles
and overow to occur.
• It can also result in detergent residue remaining on
the clothing after completion of the wash cycle.
CLOTHING CLASSIFICATIONS
The symbol types on care labels are typically classied
into the following textiles: Cotton, Blended Fiber,
Synthetic Fiber, Silk, Wool and Articial Fiber.
Conrm the Washing Capacity
Never load the machine with excessive weights, as it
will aect your washing results.
Fiber type Maximum Load Capacity
Cotton 6.0kg
Synthetics 3.0kg
Wool 2.0kg
Delicates 2.5kg
FIRST TIME USE
Before washing any clothes, please perform one cycle
without clothes inside as follows:
• Connect the power source and water.
• Insert a small amount of detergent into
Compartment II of the detergent drawer and
close it.
• Select the desired program.
• Press the “Start/Pause” button on the appliance.
Allow the program to complete and your washing
machine is now ready for use.
SELECTING A PROCEDURE
You should select you washing program based on
the type of clothing, quantity and dirtiness level, in
combination with the following temperature table.
Temperature
Mode Application
90°C
Seriously soiled clothing, pure
white cotton
(i.e. bed linen, towels, table
cloths, etc)
60°C
Moderately soiled clothing,
cotton and synthetic articles
with certain decolourising
degree
(i.e. shirts, pyjamas, etc)
40°C, 30°C,
20°C, Cold Water
Lightly soiled clothing,
synthetics and wool
TO SELECT A PROGRAM
First turn the Program Selection Dial to the
corresponding wash program, according to the type
of textiles being washed.
Secondly, select the desired temperature based on
the level of dirtiness.
Note: Generally the higher the temperature,
the more power that’s consumed.
Finally, select your desired spin speed. The higher the
spin speed, the drier the textiles will be at completion,
however more delicate textiles will be more wrinkled.
Delicate textiles should be set with a lower spin speed.
Operating the Appliance (Cont.)

1514 MODEL: SFLW75 | PRODUCT CODE: 701331 | 07/2020MODEL: SFLW75 | PRODUCT CODE: 701331 | 07/2020
Operating the Appliance (Cont.)Operating the Appliance (Cont.)
Selecting the main washing program depend on the
types of clothing to be washed, as follows:
Daily Wash (15’ 30’ 45’)
This procedure is suitable for washing a small quantity
of clothes without heavy soiling.
Mix
You can select this procedure wash the tough clothes,
that need much more time and strength. It is used for
the daily clothes for cotton, such as sheets, chained,
pillowcases, bathrobe and underwear.
Delicate
You can select this procedure to wash your delicate
clothes. Its washing intensity is gentler and spin speed
is low compared with the “Synthetic” procedure. It is
recommended for washing any articles requiring a soft
wash.
Cotton Eco
This procedure saves energy and limits the washing
temperature to 40°C or 60°C. Use with a small quantity
of clothes which are only lightly dirty.
Cotton
To increase the washing results, the main washing time
is increased. It is recommended for washing clothes for
babies or worn by the persons with skin allergies. It is
recommended for washing durable cotton articles, for
example: bed sheets, quilt covers, pillowcases, gowns,
underwear, etc.
Synthetic
The procedure is shorter compared with that for
cottons and the washing intensity is relatively gentle.
It is recommended for washing synthetic articles, for
example: shirts, coats, etc.
Rinse & Spin
This procedure provides a short rinse cycle followed by
a spin cycle.
Drain Only
This procedure provides a drain only option.
Spin Only
This procedure provides a spin only option. Residual
soapy water shall be drained out before spinning.
Drum Clean
This procedure provides a 90°C high temperature
sterilisation to clean the drum. When this procedure is
performed, clothes or other items should not be added.
You may use this program regularly according to your
needs.
Child Lock
To avoid the washing procedure being altered by
children, you can activate the child lock function. All
buttons and dials won’t alter the machines settings,
however the
On/O button will still function.
Note: If the machine is switched o when Child Lock is
active, it will remain in Child Lock mode when switched
back on.
To activate or deactivate the Child Lock:
Press and hold the “Extra Rinse” and “Spin Speed”
buttons together at the same time for 3 seconds, whilst
the machine is operating.
The machine will make an audible tone to let you know
that the Child Lock is activated or deactivated.
Note: At the completion of a wash program, the child
lock will become deactivated automatically.
Mute
You can mute the washing machine alert by holding the
Delay button for 3 seconds. The setting will remain on
until the next reset.
Extra Rinse
The laundry will undergo an extra rinse cycle if selected.
Delay
Delay function can be set with this button, the delaying
time is 0-24H.
Spin Speed
The spin speed can be set by pressing the button until
the desired speed is set.
Muting the machine
To activate muting the machine, press and hold the
Delay button for 3 seconds. Repeat this process to
unmute the machine.
WASHING PROGRAMS TABLE
This procedure is suitable for washing a small quantity of clothes without heavy soiling.
Program 7.5kg Load Temp. (°C) Default Time Spin Speed (rpm)
Cotton Eco 40°C 7.5 40 2:43 1200
Cotton Eco 60°C 7.5 60 5:17 1200
Cotton 7.5 Cold 1:35 1200
Cotton 20°C 7.5 20 1:19 1200
Cotton 30°C 7.5 30 1:20 1200
Cotton 40°C 7.5 40 1:40 1200
Cotton 60°C 7.5 60 1:45 1200
Cotton 90°C 7.5 90 2:40 1200
Synthetic 3.75 Cold 1:18 1000
Synthetic 40°C 3.75 40 1:33 1000
Synthetic 60°C 3.75 60 1:43 1000
Drum Clean -90 1:21 400
Spin Only 7.5 -0:12 1200
Drain Only - - 0:01 -
Rinse & Spin 7.5 -0:31 1200
Delicate 30°C 2.5 30 1:00 600
Delicate 2.5 Cold 0:55 600
Mix 60°C 7.5 60 1:23 1000
Mix 40°C 7.5 40 1:02 1000
Mix 7.5 Cold 1:13 1000
Daily Wash 45' 2.0 30 0:45 800
Daily Wash 30' 2.0 20 0:30 800
Daily Wash 15' 2.0 Cold 0:15 800
Note:
1. Energy labelling program: Cotton at 60°C and maximum spin speed is the program used for the
AS/NZS 2040.2 MEPS energy rating.
2. The programs on the left are only recommendations and users can choose the appropriate program according
to their personal requirements and habits.
3. The speed is:
800: 0-400-600-800 1000: 0-400-600-800-1000 1200: 0-400-600-800-1000-1200

1716 MODEL: SFLW75 | PRODUCT CODE: 701331 | 07/2020MODEL: SFLW75 | PRODUCT CODE: 701331 | 07/2020
Cleaning and Maintenance
CLEANING PROCEDURES
WARNING!
Before beginning any cleaning or maintenance, always
ensure the appliance is switched o, the power plug is
removed from the power outlet and the water supply
has been closed.
CLEANING THE WASHING MACHINE
Proper maintenance of your washing machine will keep
it looking as new and extend its working life.
• The exterior surface can be cleaned with household
cleaners and a soft damp cleaning cloth.
• If there is any residual water at the completion of a
washing program, please use a cloth to wipe it o
immediately.
Note: Never use solvents or harsh cleaning chemicals
on your washing machine’s exterior.
CLEANING THE INTERNAL DRUM
Should any rust form on the inside drum (i.e. water was
left to sit for an extended period of time), please remove
immediately using a chlorine free detergent. Never use
steel wool or a harsh abrasive.
FROZEN WASHING MACHINE
Should the temperature drop below zero and your
washing machine becomes frozen, you should:
• Disconnect the power supply for the washing
machine.
• Wash the tap connection with warm water, to help
you to disconnect the inlet pipe.
• Remove the inlet pipe and immerse in warm water
(i.e. within a bathtub).
• Pour some warm water into the washing machine
drum and wait for approximately 10 minutes.
• Reconnect the inlet pipe to the tap and washing
machine and open the water supply.
• Wait until the room’s ambient temperature returns
to above 0°C before trying to operate the washing
machine.
CLEANING THE DOOR SEAL AND GLASS
Wipe the glass and seal after each wash to remove lint
and stains. If lint builds up it can cause leaks.
Remove any coins, buttons and other objects from the
seal after each wash.
CLEANING THE DETERGENT DRAWER
You should periodically follow these steps to ensure the
detergent drawer remains clean:
• Do not use alcohol, solvents or chemical products
to clean the machine.
• Press down on the arrow, located on the cover for
the fabric softener compartment of the detergent
drawer.
• Lift the clip up and remove the fabric softener
compartment cover.
• Wash all grooves with warm water.
• Re-install the fabric softener compartment cover
into the detergent drawer, and push the drawer back
into position.
CLEANING THE INLET FILTER
You should clean the inlet lter periodically, or if you nd
that insucient water is being supplied to your washing
machine when the supply tap is open.
Washing the lter in the tap
• Close the water supply tap.
• Remove the water supply hose from the tap.
• Clean the lter
• Reconnect the water supply hose.
To clean the washing machine lter:
• Screw o the inlet pipe from the rear of the
washing machine.
• Pull out the lter with long nose pliers, wash it
thoroughly with water and re-install the lter.
• Reconnect the inlet pipe to the rear of the
washing machine.
• Open the water supply at the tap and ensure there
is no water leakage.
• Once nished, close the water supply tap.
Note: If the brush is not clean, you can pull out the lter
washed separately; Reconnect, turn on the tap.
CLEANING THE DRAIN PUMP FILTER
Removing foreign objects
WARNING!
To avoid the risk of an electric shock, always remove
the power plug from the power outlet before cleaning
the Drain Pump lter.
Periodically you should clean the drain pump lter to
ensure normal operation of your washing machine.
The type of washing, frequency and soil level of your
washing cycles will alter how often this procedure
needs to be undertaken, however you should inspect
the lter regularly.
Should your washing machine not empty and/or spin, or
your machine makes unusual noises during operation,
your Drain Pump lter could be blocked. Follow this
procedure to check or remove any foreign objects.
• After disconnecting the power, open the lter cover
at the front base of your washing machine.
• Unscrew the lter in an anti-clockwise direction and
remove any foreign objects.
• Re-install the lter and close the service panel.
WARNING!
Never remove the pump cover when the washing
machine is in operation, always wait until the appliance
has nished and the is empty. There can be hot water
within the pump, so be careful to avoid burns, should
it have operated recently. When replacing the cover, be
careful to ensure it is closed securely.
Washing the filter in the tap
1.Close the tap.
2.Remove the water supply hose from the tap.
3.clean the filter.
4.Reconnect the .water supply hose
Cleaning The Inlet Filter
• Inlet filter must be cleaned if there is less water.
• If the brush is not clean, you can pull out the filter washed separately;
• Reconnect, turn on the tap.
Washing the filter in washing machine:
1.Screw off the inlet pipe from the backside
of the machine.
2.Pull out the filter with long nose pliers
and reinstall it back after being washed.
3.Use to clean the filter.
4.Reconnect the inlet pipe.
the brush
Clean The Detergent Dispenser
Do not use alcohol,solvents or chemical products to clean the machine.•
A
Pull out the dispenser
drawer with press the A
Clean the dispenser
drawer under water
Clean inside the recess
with an old toothbrush
Insert the dispenser
drawer
12
34
Note!
Note!
Note!
23
1.Press down the arrow location on softener cover inside the dispenser drawer.
2.Lift the clip up and take out softener cover and wash all grooves with water.
3.Restore the softener cover and push the drawer into position.
MAINTENANCES
Washing the filter in the tap
1.Close the tap.
2.Remove the water supply hose from the tap.
3.clean the filter.
4.Reconnect the .water supply hose
Cleaning The Inlet Filter
• Inlet filter must be cleaned if there is less water.
• If the brush is not clean, you can pull out the filter washed separately;
• Reconnect, turn on the tap.
Washing the filter in washing machine:
1.Screw off the inlet pipe from the backside
of the machine.
2.Pull out the filter with long nose pliers
and reinstall it back after being washed.
3.Use to clean the filter.
4.Reconnect the inlet pipe.
the brush
Clean The Detergent Dispenser
Do not use alcohol,solvents or chemical products to clean the machine.•
A
Pull out the dispenser
drawer with press the A
Clean the dispenser
drawer under water
Clean inside the recess
with an old toothbrush
Insert the dispenser
drawer
12
34
Note!
Note!
Note!
23
1.Press down the arrow location on softener cover inside the dispenser drawer.
2.Lift the clip up and take out softener cover and wash all grooves with water.
3.Restore the softener cover and push the drawer into position.
MAINTENANCES
Cleaning and Maintenance (Cont.)
Washing the filter in the tap
1.Close the tap.
2.Remove the water supply hose from the tap.
3.clean the filter.
4.Reconnect the .water supply hose
Cleaning The Inlet Filter
• Inlet filter must be cleaned if there is less water.
• If the brush is not clean, you can pull out the filter washed separately;
• Reconnect, turn on the tap.
Washing the filter in washing machine:
1.Screw off the inlet pipe from the backside
of the machine.
2.Pull out the filter with long nose pliers
and reinstall it back after being washed.
3.Use to clean the filter.
4.Reconnect the inlet pipe.
the brush
Clean The Detergent Dispenser
Do not use alcohol,solvents or chemical products to clean the machine.•
A
Pull out the dispenser
drawer with press the A
Clean the dispenser
drawer under water
Clean inside the recess
with an old toothbrush
Insert the dispenser
drawer
1234
Note!
Note!
Note!
23
1.Press down the arrow location on softener cover inside the dispenser drawer.
2.Lift the clip up and take out softener cover and wash all grooves with water.
3.Restore the softener cover and push the drawer into position.
MAINTENANCES
• Before your maintenance starts, please unplug the machine and close the tap.
Cleaning The Cabinet
Cleaning The Drum
Formic acid and its diluted solvents or equivalent are forbidden, such as
solvents or chemical products,etc.
•
alcohol,
• Don’t put laundry in the washing machine during the drum cleaning.
Cleaning The Door Seal And Glass
Warning!
！！
Note!
Note!
10
22
Cleaning And Care
The rusts left inside the drum by the metal articles shall be removed immediately
with chlorine-free detergents.
Never use steel wool.
Proper maintenance on the washing machine can extend its
working life. The surface can be cleaned with diluted
non-abrasive neutral detergents when necessary. If there is
any water overflow, use the wet cloth to wipe it off immediately.
No sharp items are allowed.
Wipe the glass and seal after each wash
to remove lint and stains. If lint builds up it
can cause leaks.
Remove any coins, buttons and other objects
from the seal after each wash.
MAINTENANCES
• Make sure that valve cap and emergency drain hose are reinstalled properly, cap
plates should be inserted aligning to hole plates otherwise water may leak;
• Some machines don’t have emergency drain hose, Rotate lower cover cap directly
to make water run into basin.
• When the appliance is in use and depending on the programme selected there can
be hot water in the pump. Never remove the pump cover during a wash cycle, always
wait until the appliance has finished the cycle, and is empty. When replacing the
cover, ensure it is securely re-tightened.
Cleaning The Drain Pump Filter
Be careful of the hot water!
Allow detergent solution to cool down.
•
•
• Unplug the machine to avoid electrical shock before washing.
• Drain pump filter can filter the yarns and small foreign matters from the
washing.
• Clean the filter periodically to ensure the normal operation of washing
machine.
Warning!
！！
10
24
Caution!
MAINTENANCES
Open the Service filter Open the filter by turning
to the counter clockwise
Remove extraneous
matter
1
Close the lower cover cap
3
。
24
• Make sure that valve cap and emergency drain hose are reinstalled properly, cap
plates should be inserted aligning to hole plates otherwise water may leak;
• Some machines don’t have emergency drain hose, Rotate lower cover cap directly
to make water run into basin.
• When the appliance is in use and depending on the programme selected there can
be hot water in the pump. Never remove the pump cover during a wash cycle, always
wait until the appliance has finished the cycle, and is empty. When replacing the
cover, ensure it is securely re-tightened.
Cleaning The Drain Pump Filter
Be careful of the hot water!
Allow detergent solution to cool down.
•
•
• Unplug the machine to avoid electrical shock before washing.
• Drain pump filter can filter the yarns and small foreign matters from the
washing.
• Clean the filter periodically to ensure the normal operation of washing
machine.
Warning!
！！
10
24
Caution!
MAINTENANCES
Open the Service filter Open the filter by turning
to the counter clockwise
Remove extraneous
matter
1
Close the lower cover cap
3
。
24

1918 MODEL: SFLW75 | PRODUCT CODE: 701331 | 07/2020MODEL: SFLW75 | PRODUCT CODE: 701331 | 07/2020
Troubleshooting
WARNING!
Only authorised technicians can carry out repairs.
Before contacting our customer service team, please refer to the table below to see if your fault can be xed by
yourself. Should a service technician visit be arranged and its found there are no faults with the appliance, a call out
charge will apply. If the below table does not resolve your fault please turn o the washing machine and remove it
from the power outlet.
FAULT SOLUTION
Washing Machine
won’t start-up
Check that the mains plug is inserted and switched on at the power point.
Check that the door is closed securely.
Check that the relevant fuse hasn’t blown.
Check that the water supply tap has been opened.
Door won't open The machine’s safety protection is working. Disconnect the power and reconnect the power.
Water is leaking The drainage waste pipe may be blocked.
Check and fasten all water connection pipes.
Inlet or Outlet hoses may be damaged. Please check.
Display isn’t lighting up Check that the power isn’t disconnected.
PC board may have issues. Please contact our customer service team.
Detergent residues remain in
the detergent drawer
Ensure you are using a correct amount of detergent.
Follow the cleaning steps to remove any damp residual detergent from the drawer.
Washing results aren’t
to expectations
Ensure you are using a sucient amount of detergent.
Ensure the correct quantity of clothes are being used depending on the wash program selected.
Ensure you are using the correct wash program to suit the clothing and level of dirtiness.
Try using an alternative detergent.
Washing machine is making an
abnormal noise or vibrating
Ensure the washing machine is level.
Ensure that all transportation bolts have been removed.
Ensure the appliance has been installed on a solid and level oor.
Ensure that all legs are making contact with the oor and adjust as required.
Follow the Drain Pump cleaning procedure and ensure there are no foreign objects.
INDICATION LIGHTS SOLUTION
Flashing Pause/Start light
and Lock light ( )
or E30 displayed
Door is not closed properly
Restart after the door is closed
Check if there are clothes or washing articles stuck
Flashing No Spin light
or E10 displayed
Water injecting problem
while washing
Check if the water pressure is too low
Straighten the water pipe
Check if the inlet valve lter is blocked
Flashing No Spin and
Pause/Start light
or E21 displayed
Overtime water draining
Check if the drain hose is blocked
Flashing Extra Rinse light
and on Lock light ( )
or E12 displayed
Water overow
Restart the washer
Note:
If the above steps don’t resolve your issue or you cannot resolve the fault by yourself:
• Press the “On/O” button.
• Switch o the appliance at the power outlet and remove the plug.
• Call our customer service team on 1300 11 4357.
Troubleshooting (Cont.)

2120 MODEL: SFLW75 | PRODUCT CODE: 701331 | 07/2020MODEL: SFLW75 | PRODUCT CODE: 701331 | 07/2020
25
AFTER SALES SUPPORT
1300 886 649
[e-mail]
AUS MODEL: MDR70-VR031 PRODUCT CODE: 61494 06/2018
Other Useful Information (Cont.)
Responsible disposal
At the end of its working life, do not throw this appliance out with your household
rubbish. Electrical and electronic products contain substances that can have a
detrimental effect on the environment and human health if disposed of inappropriately.
Observe any local regulations regarding the disposal of electrical consumer goods and
dispose of it appropriately for recycling. Contact your local authorities for advice on
recycling facilities in your area.
Technical specifications
Product STIRLING 7kg Clothes Dryer
Model Number MDR70-VR031
Rated capacity 7kg
Voltage & Frequency 220-240V~ 50Hz
Rated Power 2000W
Motor Input Power 200W
Heating Power 1800W
Ingress Protection IPX4
Ambient temperature +5°C to +35°C
Dimensions 595 (W) x 555 (D) x 840 (H) mm
Net Weight approx. 35kg
Compliance
This product has been fully tested and meets all requirements as set out by standards
AS/NZS 60335.1 and AS/NZS 60335.2.11.
The RCM Mark (Regulatory Compliance Mark) indicates that the product
complies with the relevant guidelines of the ACMA as well as corresponding
government requirements for the safety of electrical devices.
E209
1
www.xxxxxxx.com
0000 000 000
60cm/90cm Canopy Rangehood
Unfortunately, from time to time, faulty products are manufactured which need to be
returned to the Supplier for repair.
Please be aware that if your product is capable of retaining user-generated data (such as files
stored on a computer hard drive, telephone numbers stored on a mobile telephone, songs
stored on a portable media player, games saved on a games console or files stored on a USB
memory stick) during the process of repair, some or all of your stored data may be lost.
We recommend you save this data elsewhere prior to sending the product for repair.
You should also be aware that rather than repairing goods, we may replace them with
refurbished goods of the same type or use refurbished parts in the repair process.
Please be assured though, refurbished parts or replacements are only used where they
meet ALDI’s stringent quality specifications.
If at any time you feel your repair is being handled unsatisfactorily, you may escalate your
complaint. Please telephone us on 1300 11 43 57 or write to us at:
Residentia Group
1/32 Wangaratta St
Richmond VIC 3121
Australia
Email: [email protected]
Repair and Refurbished
Goods or Parts Notice
7.5kg Front Load Washing Machine
165 Barkly Avenue,
Burnley VIC 3121
Australia
Email: [e-mail]
Helpline hours of operation:
Mon–Fri
9:00 AM - 5:00 PM
25
AFTER SALES SUPPORT
1300 886 649
[e-mail]
AUS MODEL: MDR70-VR031 PRODUCT CODE: 61494 06/2018
Other Useful Information (Cont.)
Responsible disposal
At the end of its working life, do not throw this appliance out with your household
rubbish. Electrical and electronic products contain substances that can have a
detrimental effect on the environment and human health if disposed of inappropriately.
Observe any local regulations regarding the disposal of electrical consumer goods and
dispose of it appropriately for recycling. Contact your local authorities for advice on
recycling facilities in your area.
Technical specifications
Product STIRLING 7kg Clothes Dryer
Model Number MDR70-VR031
Rated capacity 7kg
Voltage & Frequency 220-240V~ 50Hz
Rated Power 2000W
Motor Input Power 200W
Heating Power 1800W
Ingress Protection IPX4
Ambient temperature +5°C to +35°C
Dimensions 595 (W) x 555 (D) x 840 (H) mm
Net Weight approx. 35kg
Compliance
This product has been fully tested and meets all requirements as set out by standards
AS/NZS 60335.1 and AS/NZS 60335.2.11.
The RCM Mark (Regulatory Compliance Mark) indicates that the product
complies with the relevant guidelines of the ACMA as well as corresponding
government requirements for the safety of electrical devices.
E209
SFLW75
7.5kg
595 (W) × 565 (D) × 850 (H) mm
68kg
0.05MPa~1.0MPa
220-240V, ~50Hz, 10Amp
Standard Water Pressure
Note:
This product is subject to continuous improvement, specication are subject to change
without prior notice.
This product was tested in accordance with AS/NZS 2040.2 and AS/NZS6400 using
program: “Cotton Eco 60”, which is the program recommended for a normally soiled
cotton load at rated capacity.
Power Supply
STIRLING 7.5kg Front Load Washing Machine
27
AFTER SALES SUPPORT
1300 886 649
[e-mail]
AUS MODEL: MDR70-VR031 PRODUCT CODE: 61494 06/2018
Repair and Refurbished
Goods or Parts Notice
Unfortunately, from time to time, faulty products are manufactured which need to
be returned to the supplier for repair.
Please be aware that if your product is capable of retaining user-generated data
(such as files stored on a computer hard drive, telephone numbers stored on
a mobile telephone, songs stored on a portable media player, games saved on
a games console or files stored on a USB memory stick) during the process of
repair, some or all of your stored data may be lost. We recommend you save this
data elsewhere prior to sending the product for repair.
You should also be aware that rather than repairing goods, we may replace them with
refurbished goods of the same type or use refurbished parts in the repair process.
Please be assured though, refurbished parts or replacements are only used
wheretheymeetALDI’sstringentqualityspecications.
If at any time you feel your repair is being handled unsatisfactorily, you may
escalate your complaint. Please telephone us on 1300 886 649 or write to us at:
Tempo (Aust) Pty Ltd ABN 70 106 100 252
PO BOX 6056 Frenchs Forest, Sydney, Australia NSW 2086
Telephone: [phone] (Aust) - Fax: [phone]
Tempo Help Desk: 1300 886 649 (Aust)
(Operating Hours: Mon-Fri 08:30am to 06:00pm EST)
Email: [email protected]g
7kg Clothes Dryer
YEAR IN HOME
WARRANTY
3
Other Useful Information

2322 MODEL: SFLW75 | PRODUCT CODE: 701331 | 07/2020MODEL: SFLW75 | PRODUCT CODE: 701331 | 07/2020
This page
is intentionally
left blank
This page
is intentionally
left blank

24 MODEL: SFLW75 | PRODUCT CODE: 701331 | 07/2020