Stone STAD080WT-15 Technical Document
Android industrial control LCD display
Model
STAD080WT-15
Equipment Manual
All rights reserved by STONE
Technologies
STAD080WT-15 Equipment Manual www.stoneitech.com
Release 01/2019 2
Contents
1 Android LCD Specification Introduction................................................................3
1.1 Introduction........................................................................................................ 3
1.2 Technical Parameters...................................................................................... 3
2 Interface Description................................................................................................6
2.1 Serial Ports.........................................................................................................6
2.2 USB-HOST Interface........................................................................................7
2.3 USB-DEVICE Interface.................................................................................... 7
2.4 GPIO Interface...................................................................................................7
2.5 Network Interface..............................................................................................7
2.6 Button..................................................................................................................8
2.7 TF Card Holder..................................................................................................8
2.8 Audio Interface.................................................................................................. 8
2.9 WIFI and Bluetooth Module.............................................................................8
2.10 4G Module....................................................................................................... 8
2.11 GPS Module.................................................................................................... 9
3 Accessories............................................................................................................ 10
3.1 Antenna Selection...........................................................................................10
3.2 Speaker............................................................................................................ 10
4 Physical Dimensions............................................................................................. 11
5 International Certification......................................................................................12
6 Naming Rule...........................................................................................................13
All rights reserved by STONE
Technologies
STAD080WT-15 Equipment Manual www.stoneitech.com
Release 01/2019 3
1Android LCD Specification Introduction
1.1 Introduction
STAD080WT-15 Android LCD is a new model Android LCD by STONE Tech.
It is equipped with 1.1GHz Quad-core Coretex A7. Recommended power
supply is DC 9-30V, the PCB board integrates a variety of peripheral
interfaces.
All rights reserved by STONE
Technologies
STAD080WT-15 Equipment Manual www.stoneitech.com
Release 01/2019 4
1.2 Technical Parameters
Main Parameters
Parameter
Description
CPU
Quad-core 1.1Ghz
ARM Cortex™-A7
System
Android 7.1
Rooted
RAM
1GB
eMMC
8GB
EMMC
Display Parameters
Parameter
Description
Interface
MIPI
Resolution
800x1280
16:9 Ratio
Touch Type
Capacitive
5 points touch
Luminance
300 cd/m2
Viewing Angles
Full viewing angles
IPS
Peripheral Interfaces
Interface
Quantities
Description
Power
1
HX39601-2BH
Serial port
2 RS-232, 1 RS-485
1 RS-485 multiplex with RS-232,
232 port is HX25037-4BH
connecto, 485 port is
HX25037-3BH connector
USB
3 HOST, 1 DEVICE
External 3 USB HOST
Audio
1 HPO
J15 is a headphone jack.
built-in mono 8R/1.5W power
amplifier speaker and
microphone with sensitivity
-48dB to -39dB
TF Slot
1
TF Card slot
SIM Slot
1
Micro SIM slot
Ethernet
1
10/100Mbps self-adaptive
network interface
GPIO
6(Optional)
2 output,4 input 5V IO,
connector HX25037-8BH
4G
1 (Optional)
7 Mode full Netcom
WIFI
1 (Optional)
Support Wi-Fi 802.11a/b/g/n
wireless transmission
All rights reserved by STONE
Technologies
STAD080WT-15 Equipment Manual www.stoneitech.com
Release 01/2019 5
Support Bluetooth 4.2
Bluetooth
1 (Optional)
GPS
1 (Optional)
GPS Global positioning
Buttons
3
1 Power, 1 Back, 1Flash
Power Supply
Parameter
Min
Typical
Max
Unit
Operating Voltage
9
12
30
V
Operating Current
300
mA
Reliability Test
Min
Typical
Max
Unit
Operating Temperature
-10
25
60
℃
Storage Temperature
-20
70
℃
Operating Humidity
5
95
RH%
Structure
Size
Description
External Dimensions
209.0mm*143.0mm*28.0mm
All rights reserved by STONE
Technologies
STAD080WT-15 Equipment Manual www.stoneitech.com
Release 01/2019 6
2Interface Description
2.1 Serial Ports
STAD080WT-15 is integrated with 4 serial ports. UART0, UART1, UART2,
UART3 are RS-232 level converted.
In addition, UART2 is RS232 and RS485 hardware multiplexing (UART2
is either used for RS232 or RS485, and the two cannot be used at the
same time).This is influenced by working environment and wires.
Notice：UART2 serial port is the debug port. There will be printing information appear
while start-on. It can be used as the normal serial port after start-on.
Serial port definition as table below:
232 Interface:
Screen printed
Interface
Pin
Device Node
Level
G
UART1
(J6)
1
ttyHSL1
RS232
T1
2
R1
3
5V
4
G
UART2
(J7)
1
TtyHSL0
RS232
T2
2
R2
3
5V
4
485 Interface:
Screen printed
Interface
Pin
Device Node
Level
G
UART2
1
TtyHSL0
RS485
B
2
A
3
All rights reserved by STONE
Technologies
STAD080WT-15 Equipment Manual www.stoneitech.com
Release 01/2019 7
2.2 USB-HOST Interface
The STAD080WT-15 has integrated 3 USB-HOST. These 3 USB
interfaces can be connected to a variety of USB peripherals, such as USB
keyboard and mouse, U disk, USB interface camera (support UVC
protocol) and other commonly used peripherals.
Current：USB output 5V, single USB port max current 500mA, total max
current 1.5A
2.3 USB-DEVICE Interface
DEV interface is USB-DEVICE interface. This interface can only be used
for system programming and ADB debugging.
2.4 GPIO Interface
GPIO interface, only support 5V signal pin. Voltage 5V, I1, I2, I3, I4 are
unidirectional input. IO, O5, O6 are unidirectional output IO;
GPIO default pull-up, as output 5V 4mA, as input the voltage must below
5V, otherwise circuit may be damaged.
PIN
Definition
1
5V
2
GND
3
I1(GPIO_0)
4
I2(GPIO_95)
5
I3(GPIO_69)
6
I4(GPIO_36)
7
O5(GPIO_58)
8
O6(GPIO_28)
2.5 Network Interface
STAD080WT-15 is a 100M adaptive Ethernet interface that is brought out
via RJ45. If you want to use Android's Ethernet function, you need to plug
the network cable into the ETH interface and then turn on the Ethernet
All rights reserved by STONE
Technologies
STAD080WT-15 Equipment Manual www.stoneitech.com
Release 01/2019 8
function by setting. The default Ethernet is DHCP-assigned IP. If you want
to manually configure the IP address, you can configure it in the advanced
settings.
2.6 Button
There are 3 buttons on the circuit board, The button functions are as
follows:
1.
POWER；
2.
BACK；
3.
FLASH;
Please refer to the user manual on how to use flash button to upload
the .img image file.
2.7 TF Card Holder
The onboard leads 4-bit data cable to the TF card holder, supports
large-capacity storage. It is designed for hot-swap detection, supports
eMMC protocol 4.3 and SD Memory Card protocol v2.0.
2.8 Audio Interface
The external audio interface is a headphone port (J15),
In addition, it is equipped with a built-in microphone interface and speaker
interface. The microphone sensitivity is -48dB to -39dB.The SPK interface
is an 8R/1.5W amplifier circuit.
2.9 WIFI and Bluetooth Module
STAD080WT-15 is equipped with Bluetooth WIFI 2-in-1 module. Can
support Bluetooth 4.2 protocol 2.4G WIFI, after pairing, it supports the
function of transferring files with mobile phones and other devices.
2.10 4G Module(Optional)
The mother board supports the 4G module of the MINI-PCIE interface. If
you need to use the 4G function, you only need to insert the module into
the mother board, then put the SIM card into the card slot to use the 4G
function.
All rights reserved by STONE
Technologies
STAD080WT-15 Equipment Manual www.stoneitech.com
Release 01/2019 9
The mother board card slot supports only the Micro SIM card.
The 4G module supports
TD-LTE/FDD-LTE/TD-SCDMA/WCDMA/EVDO/CDMA1X/GSM mode,
please refer to chart below and confirm with your network operator first.
Note: The SIM card is slanted to the outside.
Supported Band
Frequency
TD-LTE
B34/B38/B39/B40/B41
FDD-LTE
B1/B3/B5/B8
TD-SCDMA
B34/B39
WCDMA
B1/B8
CDMA1X
BC0
GSM
900/1800MHz
2.11 GPS Module(Optional)
The STAD080WT-15 is equipped with a GPS-enabled 4G module to
support fast and accurate positioning. If you need this function, you need
to put the GPS antenna in the open space. When you turn on the
Android positioning function, you can get the latitude and longitude
coordinates of the device at this time.
2.12 LED Interface
The STAD080WT-15 has two LED lights. The POWER light is the power
indicator. When the Android screen is normally powered, the POWER
light stays on. USR blinks when the system is running normally, and
always on when abnormal.
All rights reserved by STONE
Technologies
STAD080WT-15 Equipment Manual www.stoneitech.com
Release 01/2019 11
4Physical Dimensions
Speaker 8R5W 100*45
Stereo Speaker PH2.0-4P
Cable length 80 cm
External,Optional
Speaker 8R5W 100*45
Stereo Speaker PH2.0-2P
Cable length 80 cm
External,Optional
Speaker 4R3W
TS7033BOX-01-L350
PH1.25-2P/ Speaker 2040
4R2W Rectangle Full-band
Mono Speaker
Cable length 20 cm
External/Internal,Optional
All rights reserved by STONE
Technologies
STAD080WT-15 Equipment Manual www.stoneitech.com
Release 01/2019 14
Code
Explain
ST
Company Code
AD
Android
070
TFT Panel Dimension: 7 inch
W
W=Wide Voltage
C
C=With Capacitive Touch Screen
T=Tempered GlassTouch Screen
R=Infrared Touch Screen
0
0= Standard Configuration 1= High Configuration
1
1=Without Case 5=Metal Case
Intelligent Customer Online Services
Intelligent Customer Support offers comprehensive additional information of
Intelligent Products through its Online services as follows:
- Official website: https://www.stoneitech.com/
http://www.stone-hmi.com/
- Alibaba platform: http://shuangying-ocean.en.alibaba.com/
http://stonetech.en.alibaba.com/
- Telephone: 0086-10-84351669
- E-mail: info@stone-hmi.com
Other support
In need of technical queries, please contact STONE representatives in the subsidiaries
and branches responsible for your area.
Table of contents
Other Stone Monitor manuals
