Stratco QUICKSCREEN HB-4589 User manual

See code list below for
order codes
HB-4589 (1800x1200 kit - black)
HB-4590 (1800x1200 kit - primrose)
HB-4591 (1800x1200 kit - w/grey)
HB-4592 (1800x1200 kit - white)
HB-4593 (2400x1800 kit - black)
HB-4594 (2400x1800 kit - primrose)
HB-4595 (2400x1800 kit - w/grey)
HB-4596 (2400x1800 kit - white)
Suits standard full posts
See code list below for
order codes
See code list below
for order codes
See code list below
for order codes
Must be special ordered by
customer
See code list below for
order codes
Full Post
1800mm or 2400mm
Includes free top cap
Base Plate Set
4x screws included
Dress Ring
Fits over full post
Side Frame
With snap-on cover
Includes: 2x side frames with snap-on cover, 16x 65mm
slats, 2x top caps, spacer blocks & screws
Includes: 2x side frames with snap-on cover, 24x 65mm
slats, 1x mid rail, 2x top caps, spacer blocks & screws
1800mm W x 1200mm H
Complete Kit
COLOURS:
Australian Interpon Powder Coat
ORDER CODES:
QUICKSCREEN KITS: QUICKSCREEN POSTS ACCESSORIES
QUICKSCREEN RANGE:
Black
GN150A
Woodland
grey
GL205A
White
GA078A
Primrose
GD037A
2100mm long
2400mm W x 1800mm H
Complete Kit
QUICK
SCREEN
COMPLETE KIT READY TO GO
• Height and width adjustable
Cut to desired size
• Slat spacing easily adjusted
Spacer blocks included
• Clean nish
Screw xings hidden by snap on cover
• Complete kit includes:
65mm aluminium slats, side
frames, snap covers, caps, spacer
blocks & screws
• Easy, quick assembly!
HB-4624 (1800 post - black)
HB-4625 (1800 post - primrose)
HB-4626 (1800 post - W/grey)
HB-4627 (1800 post - white)
HB-4628 (2400 post - black)
HB-4629 (2400 post - primrose)
HB-4630 (2400 post - W/grey)
HB-4631 (2400 post - white)
HB-4641 (BP set - black)
HB-4642 (BP set - primrose)
HB-4643 (BP set- W/grey)
HB-4644 (BP set - white)
HB-4649 (Side frame - black)
HB-4650 (Side frame - primrose)
HB-4651 (Side frame- W/grey)
HB-4652 (Side frame - white)
See code list below for
order codes
Top Cap
For side frame - Nylon
Trade tip!
Use side
frames to
create more
screens
with offcuts
or unused
slats from
Quickscreen
packs
SLAT SCREENING

SC-10332 (Black)
SC-10338 (Woodland grey)
SC-10376 (Primrose)
SC-10377 (White)
SLAT SCREENING
Includes: 2x louvre brackets & 2x screws
Louvre bracket Kit
LOUVRE BRACKETS

SLAT SCREENING
QUICKSCREEN
ADVANTAGES
For example, post on a 45 degree
angle. This is easily achieved by
cutting the tips of the blades on
an angle so they t into the frame
for xing.
INSTALL SCREENS OFF ANGLED POSTS 10 YEAR POWDERCOAT WARRANTY
Quickscreen uses the highest
quality Interpon Australian powder
coat, providing the end user with
a 10 year warranty on the nish.
(maintenance conditions apply)
CUSTOM MADE GATES
Gates go hand in hand with
horizontal slat screens. Stratco can
supply pedestrian gates to size
and at pack.
NO ADDITIONAL FIXINGS
Unlike other systems, Quickscreen
does not require additional U
channels or angles for installation or
to handle out of square situations.
ADJUSTABLE SLAT SPACING
Spacer blocks are included to
give a 9mm, 15mm or 20mm slat
spacing, however, any spacing is
achievable. This adjustability can
come in handy when trying to
meet specic spacings designated
by local councils or to match with
existing spacing.
CHEAPER THAN COMPETITORS
Quickscreen’s advantage in
the market is its amazing trade
pricing. This real saving has been
achieved without compromising
the quality or integrity of the
product.
ADJUSTABLE
ADJUSTABLE

SLAT SCREENING
QUICKSCREEN INSTALL GUIDE
Step 1
Take measurement between wall or post at 3 points:
top, middle and bottom. Take note of the smallest
measurement.
Step 2
Cut side frames 3mm less than desired height (the 3mm
allows for the top cap).
Afx side frames to wall or post with appropriate xings (not
included).
Step 3
Cut aluminium slats 12mm less than total width of opening.
Refer to measurement in step 1.
The 12mm deduction takes into account thickness of side
frame on both sides of the screen and head of xings.
Ensure xings holding side frame do not obstruct slats when
dropping in. If so, you may need to trim slats further.
Step 5
Screw off each slat as it is dropped in ensuring level. If
spacer blocks used, remove after each level is installed.
Step 6
Cut snap on cover to appropriate height.
Snap on xing cover to hide screws.
Tip: If screen is wider than 1800mm wide, it is recommended
to attach the midrail bar vertically at the centre of the
screen. Cut midrail to appropriate height of screen and
screw off to each slat at back side of screen
Step 4
Drop in aluminium slats.
Tip: Ensure bottom slat is level & screw off at both sides.
Optional spacer blocks provided in kit which can be
rotated to achieve a 9, 15 or 20mm slat gap. Any gap can
be achieved by leaving a desired space.
Consider using timber block spacers to achieve other gaps.
-12mm total deduction, cut off one side only
2
3
1