2.Press the button shortly,the driver will be installed
automatically generally,you will find new hardware on computer.
Find the PC camera icon and use it.
3.Remove camera from computer.
Charging
1.Connect the Camera to your PC / Laptop or USB Charger by
USB cable provided.
2.Once connected ,the right indicator on Camera will turn red
and flash, the unit is now charging.
3.After approximately two hours, the Red LED may stop flashing
and remain on – keep charging one hour more to ensure the
battery is completely re-charged.
4.Remove it from your PC / Laptop or charger.
Set Date/Time
1.Create a new “.txt” file, name it as “time.txt” .
2.Put the correct date and time into the file according below
format. l.e.
2014-01-02 04:05:00 Y (or N)
TIPS:
2014 is the year, 01 is the month, 02 is the day
04 is the hour, 05 is the minute, 00 is the second
Y = with Date/Time watermark
N = without Date/Time watermark
3. Save file, and copy it into micro SD card.
4. Remove camera from computer, restart then record, the date
and time are set up successfully.
7
