Style selections TPGAZ2307 User manual

ITEM #2593021/ #2808041/ #2808042
GABLED SOFT-TOP
GAZEBO
MODEL #TPGAZ2307/ #TPGAZ2307A/ #TPGAZ2307B
1
VR20276
Español p. 22
Serial Number ____________________________ Purchase Date _________________________
Questions, problems, missing parts? Before returning to your retailer, call our
customer service department at 1-877-888-8225, 8 a.m. - 8 p.m., EST, Monday - Sunday.
STYLE SELECTIONS and logo design are trademarks
or registered trademarks of LF, LLC.
All Rights Reserved.

P4
P1 P1
P1
P
P1
S
L
R1
P2
P2
P2
P2
2
PACKAGE CONTENTS
LHook 1
SSmall Canopy 1
S1 Small Netting 1
1
Decorative Ball
P4
DESCRIPTION
1
Connection Tube
Connection Frame
2
PART
PCenter Device
Q
Small Top Frame
P1 Long Small Top Bracing
P3
R
1
Small Canopy Tube
R1
4
Short Small Top Bracing
P2
QUANTITY
2
2
4
DESCRIPTION
PART QUANTITY
P3
Q
Q
RR
Q
P3
S1

T
MW
J1
H1 H1
H1
H1
J
J
J
J
H4
H4
H4
H4
H2
H2
H2
H2
3
PACKAGE CONTENTS
G1 Left Bracing 4
TBig Canopy 1
4
Long Top Bar
J
PART DESCRIPTION
4
Roof Tube
Middle Vertical Beam
4
PART
H1 Middle Beam
J1
Connector
QUANTITY
G2 Right Bracing
H2
M
DESCRIPTION QUANTITY
4
4
4
H3 Middle left Bracing 44
Triangle Netting
W
H4 Middle Right Bracing 4
H3
G1
G1
G1
G1
G2
G2
G2
G2
H3
H3
H3

4
PACKAGE CONTENTS
APost 4
O1 Base 4
8
Beam Connector
I
PART DESCRIPTION
4
Decorative Cover
Left Beam
4
PART
B2 Right Support Bar
K
Top Bar Connector
QUANTITY
B1 Left Support Bar
C1
N
DESCRIPTION QUANTITY
4
4
4
C2 Right Beam 44
Base Cover
O2
16
Curtain
Netting Tube Connector
4
ENetting Tube
U
Mosquito Net
DProtection Corner
F
V
4
4
4
4′
4′
1′
1′
3′
3′
2′
2′
4′
4′
1′
1′
3′
3′
2′
2′
A
O2
O2
O2
O2
O1
D
D
D
D
N
N
N
N
I
I
I
I
K
K
K
K
VU
C1 C1
C1
C1
C2
C2
C2
C2
O1
O1
O1
B1
B1
B1
B1
B2
B2
B2
B2
A
A
A
E
E
E
E
E
E
F
F
F
FE
E

5
tloBmm51×6M
Qty.
tloBmm51×6M
Qty. 8 + 1 Extra
212 + 6 Extra
AA
tloBmm30×6M
Qty.
8 + 1 Extra
KK
HARDWARE CONTENTS (shown actual size)
M6 × 70 mm Bolt
Qty. 8 + 1 Extra
BB CC DD
Handle Screw
Qty.8 + 1
Extra
Handle Screw
Qty.
4 + 1 Extra
M6 × 55 mm Bolt
Qty. 8 + 1 Extra
EE
Flat Washer
Qty. 252 + 10 Extra
FF
Bolt Cover
Qty. 236 + 9 Extra
GG HH II JJ
Nut
Qty.16
+ 2 Extra
Qty. 16 + 2 Extra
Cap Plastic Gasket
Qty.
16 + 2 Extra
Ring
Qty. 80 + 4 Extra
Wrench
Allen Wrench
Qty. 2
(NOT TO SCALE)
(NOT TO SCALE)
NN OOMMLL
Stake
Qty. 16
(NOT TO SCALE)
(NOT TO SCALE)
PP
Qty. 1
(NOT TO SCALE)

A
A
6
SAFETY INFORMATION
PREPARATION
Please read and understand this entire manual before attempting to assemble, operate or install
the product.
WARNING
• Maximum load for the roof hook: 26 lbs.
• WARNING: KEEP ALL FLAME AND HEAT SOURCES AWAY FROM THIS TENT FABRIC.
This tent meets the CPAI-84 flammability requirements. The fabric may burn if left in continuous
contact with any flame source. The application of any foreign substance to the tent fabric may
render the flame-resistant properties ineffective.
CAUTION
Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list and hardware contents list. If any part is missing or damaged, do not attempt to
assemble the product.
Estimated Assembly Time: 2 hours
Tools Required for Assembly (not included): Safety goggles, Gloves, Hardhat, Stepladder.
SET UP YOUR GAZEBO PROPERLY
• 4 people are recommended for safe assembly.
• Keep all children, pets and other obstructions away from assembly area.
• If any part is missing or damaged, do not attempt to assemble the product.
• In order to avoid damage to the gazebo and its components please use appropriate tools.
• Do not use the structure as support.
• Check all bolts on a regular basis to maintain the solidity of the structure.
• Keep instructions for future use.
• Do not climb on top of the gazebo. Falling off the gazebo can result in serious injury,
possibly even death.
EXAMINE YOUR GAZEBO
• Examine occasionally to ensure there are no loose parts.
If loose parts are found, they should be retightened immediately.
• If high winds, heavy rains or snow occurs, remove roof,
Mosquito Net and Curtain,
and check for damage before continued use.
Safety goggles
Gloves Stepladder
Hardhat

AA
FF
GG
NN
AA
FF
GG
NN
1
7
ASSEMBLY INSTRUCTIONS
GG
GG
AA
FF FF
O2
AA
A
A
O2
O1
Wrench
Hardware Used
1. Slide the Base Cover (O2) over the
bottom of the Post (A) and connect
the Base (O1) to the Post (A) with
Bolt (AA) plus Flat Washer (FF).
Add Bolt Cover (GG). Repeat for all
four posts.
2. Insert the Beam Connector (I) into
the Right Beam (C2) and add the
Decorative Cover (K). Then connect
the Left Beam (C1), attach with Bolt
(AA) plus Flat Washer (FF). Add Bolt
Cover (GG). Repeat for all four sides.
NOTE: Pls do not install the screws
under the Decorative Cover (K) in
this step.
Bolt Cover
X24
X24
X24
X1
Flat Washer
X8
X8
X8
X1
M6 x 15 mm Bolt
Wrench
Bolt Cover
Flat Washer
M6 x 15 mm Bolt
Hardware Used
2
C2
C2 K
I
I
I
C2 C1
KI
I
GG
FF
C1
C2 K
AA
GG
FF
AA
C2
GG
AA
FF
FF
AA
GG I
C1
K
I
C1
C2
C2 C1
C2 C1
C1
C2

AA
FF
GG
NN
8
ASSEMBLY INSTRUCTIONS
Bolt Cover
Flat Washer
X8
X8
X8
X1
M6 x 15 mm Bolt
3. Connect the Netting Tube Connector
(F) to the beam with Bolt (AA), Flat
Washer (FF) and Bolt Cover (GG).
Hardware Used
Wrench
3
K
K
F
F
C2
C2
C1
C1
AA
GG
FF
C2 C1
K
E
E
F

ASSEMBLY INSTRUCTIONS
AA
FF
GG
NN
9
X32
X32
X32
X1
Wrench
Bolt Cover
Flat Washer
M6 x 15 mm Bolt
Hardware Used
4. Connect the assembled Beam
(C1/C2) to the Post (A), attach with
Bolt (AA), Flat Washer (FF) and Bolt
Cover (GG).
Stand the assembled structure of
posts (A) and beams (C1/C2) up with
two people. Repeat for opposite side
and add two side beams to complete
four sided structure.
4
C2
C2
C2
C1
C1
A
A
GG
FF
AA
C1
C1
C2
A
A
A
A
C1
C2
A
A
A
C2
C2
C2 C2
K
A
A
A
FF
AA
GG
C2
C1
C1

6. Insert one end of the Netting Tube (E)
into the Netting Tube Connector (F), fix
the other end onto the beam with Bolt
(BB), Flat Washer (FF) and Plastic
Gasket (JJ). Repeat for all four sides.
AA
FF
GG
NN
X32
X32
X32
X1
Wrench
Bolt Cover
Flat Washer
M6 x 15 mm Bolt
Hardware Used
ASSEMBLY INSTRUCTIONS
5. Connect the Beam (B1/B2) to the
Post (A) and the Beam (C1/C2)
respectively by Bolts (AA), Flat Washer
(FF) and Bolt Cover (GG).
10
5
6
A
C2
C2
C2
C2 B2
B2
B2
B2
C1
C1 C1
C1
A
A
A
B1 B1
B1 B1
JJ
F
JJ
FF FF
BB
GG
A
C2
C2
C2
C2 B2
B2
B2
B2
C1
C1 C1
C1
A
A
A
B1 B1
B1 B1
B1 B2
C2
C1
GG
GG
FF FF
FF
A
AA
AA AA
AA
F
JJ
JJ
BB
FF
GG
JJ
NN
Bolt Cover
Flat Washer
X8
X8
X8
X16
X1
M6 x 70 mm Bolt
Hardware Used
Wrench
Plastic Gasket

AA
FF
GG
NN
8
X4
X4
X4
X1
Wrench
Bolt Cover
Flat Washer
M6 x 15 mm Bolt
Hardware Used
ASSEMBLY INSTRUCTIONS
8. Connect the Connection Tube (Q)
with the Small Top Frame (R) by
Bolt (AA), Flat Washer (FF) and
Bolt Cover (GG).
11
FF
FF AA
GG
Q
R
R
AA
FF
GG
NN
X20
X20
X20
X1
Wrench
Bolt Cover
Flat Washer
M6 x 15 mm Bolt
Hardware Used
7.1. Connect the Top Bar Connector
(N) to the post (A) by Bolt (AA), Flat
Washer (FF) and Bolt Cover (GG).
7.2. Put the Protection Corner (D)
over the corner of the Left Beam (C1)
and the Right Beam (C2), and tighten
it by Bolt (AA), Flat Washer (FF) and
Bolt Cover (GG).
7
C2
C2
C2
C2
C1
C1
C1
N
GG
FF
AA
D
C2
C1
GG
FF
AA
C2
C1
N
N
N
N
C1

12
AA
KK
FF
GG
HH
II
NN
9
X8
X4
X16
X12
X4
X4
X2
M6 x 15 mm Bolt
ASSEMBLY INSTRUCTIONS
9.1. Assemble the two Small Top
Frame (R), connect all the Small Top
Connecting Frame (P3) to the Small
Top Frame (R) respectively, then
tighten them by Bolt (AA), Flat Washer
(FF) and Bolt Cover (GG).
9.2. Attach the Connection Frame (P3)
to the Connection Tube(Q) by Bolt
(AA), Flat Washer (FF) and Bolt Cover
(GG).
9.3. Put the Hook (L) onto the Small
Canopy Tube (R1).
9.4. Attach the Small Canopy Tube
(R1) to the Small Top Connecting
Frame (P3) by Bolt (KK) and Nut
(HH), Cap (II) and Bolt Cover (GG).
P3
R
RR
R1
L
GG
FF AA
GG
FF
GG
FF
R1
HH
FF
II
KK
KK
GG
Q
FF
AA
P3
P3
Hardware Used
Cap
Nut
Bolt Cover
M6 x 30 mm Bolt
Wrench
Flat Washer
R1
R
QP3
Q
P3
L

AA
EE
FF
GG
HH
II
NN
10
X4
X8
X20
X12
X8
X8
X2
ASSEMBLY INSTRUCTIONS
10. Insert the Long Top Bar (J) into the
Small Top Frame (R), and attach with
Bolt (AA), Flat Washer (FF) and Bolt
Cover (GG), place the other end of
the Long Top Bar (J) through the Top
Bar Connect (N) and attach with
Bolt (EE), Flat Washer (FF), Nut (HH),
Bolt Cover (GG) and Cap (II).
Install the other Long Top Bars (J)
the same way.
J
R
P3
FF
GG
FF
FF
HH
II EE
GG
AA
J
J
JJ
M6 x 15 mm Bolt
Hardware Used
Cap
Nut
Bolt Cover
M6 x 55 mm Bolt
Wrench
Flat Washer
J
J
J
Q
R
P3
13

AA
FF
GG
NN
11
14
ASSEMBLY INSTRUCTIONS
X28
X28
X28
X1
Wrench
Bolt Cover
Flat Washer
M6 x 15 mm Bolt
Hardware Used
11.1. Connect one end of the Middle
Vertical Beam (H2) to the Decorative
Cover (K) by Bolt (AA), Flat Washer
(FF) and Bolt Cover (GG), connect the
other end to the Connect (M) by Bolt
(AA), Flat Washer (FF) and Bolt Cover
(GG).
11.2. Connect one end of the Middle
Beam (H1) to the Connection Frame
(P3) by Bolt (AA), Flat Washer (FF)
and Bolt Cover (GG), and connect the
other end to the Connector (M) by Bolt
(AA), Flat Washer (FF) and Bolt Cover
(GG).
H2
FF
GG
H1
AA
GG
FF
P3
J
J
J
J
H2
H2
H2
H2
M
FF
AA
GG
H1
H1
H1
H1
H1
H2
C2
KC1
AA

AA
DD
FF
GG
NN
PP
AA
FF
GG
NN
12
13
X24
X24
X24
X1
Wrench
Bolt Cover
Flat Washer
M6 x 15 mm Bolt
Hardware Used
M
FF
DD DD
AA
GG
A
J
C2 C1
G1
G1
G2
G2
H1
H2
H1
H1
H1
H1 G1
G1
G1
G1
G2
G2
G2
G2
H3
H2
H4
AA
FF
GG
AA
FF
GG
G2
G1
H3
H3 H4
H3
H4
H4
H4
H3
H4
Hardware Used
ASSEMBLY INSTRUCTIONS
12. Connect one end of the Left
Bracing (G1) and Right Bracing (G2)
to the Beam (C1/C2), by Bolts (DD),
connect the other end of (G1/G2）
to the Connector (M) by Bolts (AA),
Flat Washer (FF) and Bolt Cover (GG).
13. Connect one end of the Middle left
Bracing (H3) and the Middle Right
Bracing (H4) to the Decorative Cover
(K), then connect the other end of
(H3/H4) to the Left Bracing (G1) and
the Right Bracing (G2) respectively,
tighten them by Bolts (AA), Flat
Washer (FF) and Bolt Cover (GG).
X16
X8
X16
X16
X1
X1
15
M6 x 15 mm Bolt
Allen Wrench
Wrench
Bolt Cover
M6 x 15 mm Bolt
Flat Washer

14
15
P1
P1
P
S
P4
P4
P1 P1
P1
S
S
15. Connect the Small Top Bracing
(P1/P2) to the Central Device (P),
cover the Small Canopy (S) onto the
small top, and the Decorative Ball
(P4) over the Central Device (P).
ASSEMBLY INSTRUCTIONS
14. Place the Big Canopy (T) over the
assembled frame.
NOTE: No need to tension the
canopy at this step.
P2
P2
P2
P2
P2
P1
T
P2
P2
P2
P2
P1
P1
P2
P1
P1
P
16

AA
KK
FF
GG
HH
II
NN
CC
LL
16
17
T
LL
CC
S
J1
J1
T
S
P3
P3
P1
Q
X4
X4
X12
X8
X4
X4
X2
M6 x 15 mm Bolt
Hardware Used
Cap
Nut
Bolt Cover
M6 x 30 mm Bolt
Wrench
Flat Washer
X4
Handle Screw
X8
Handle Screw
Hardware Used
GG
FF AA
ASSEMBLY INSTRUCTIONS
16.1. Insert the assembled small top
bracing (P1) into the top of the
connection tube, attach them by Bolt
(AA), Flat Washer (FF) and Bolt Cover
(GG).
16.2. Connect the small top bracing
(P2) to the connection frame by Bolt
(KK) and Nut (HH), Cap (II) and Bolt
Cover (GG).
17.1. Pull the Big Canopy (T) tight
and attach at top of gable with
Handle Screw (CC).
17.2. Insert one end of the Long Top
Bar (J1) into the Connection Tube (Q),
tighten the other end by Handle
Screw (LL).
Q
17
P3
P2
GG
KK
FF
FFHH
II
T
J1
J1
J1
J1

18
19
S1
S1
P3
W
W
G1 G2
W
J
18. Install the Small Netting (S1) onto
the outside of the Connection Frame
(P3) by felts, connect the two Small
Netting (S1) by felts.
Note: The small netting should be
installed outside of the connection
frame.
ASSEMBLY INSTRUCTIONS
19. Fix the Triangle Netting (W) onto
the velcro tapes which are pasted
on the inside of the shelf.
T
S
18

MM
OO
20
21
Ring
U
O2
A
OO
O1
EMM
MM
E
V
X80
Hardware Used
Stake
X16
Hardware Used
ASSEMBLY INSTRUCTIONS
20. Hang the Curtain (U) to the inside
of the netting tube by using the
hanger (MM) and the Mosquito Net
(V) to the outside of the netting tube
.
21. Insert the Stake (OO) into the
ground through the Base (O1).
19

20
CARE AND MAINTENANCE
WARRANTY
1 YEAR WARRANTY FOR FRAME AND FABRIC.
•WHAT IS COVERED
We provide warranty to the original purchase for 1 year for frame and fabric from the date of purchase,
and the fabric and frame will be replaced at no charge due to manufacturing defects.
•WHAT IS NOT COVERED
We do not reimburse for transportation costs. This warranty does not cover the damage caused by commercial
use, acts of nature, fire, freezing, and abusive use. Discoloration or fading of the finish or fabrics as a result
of chemicals or spills is not covered.
Contact the Customer Service Team at 1-877-888-8225.
•For cleaning, use a mild detergent solution, rinse with water, and allow to air dry.
Do not use acetone, abrasive, or other special detergents as they would be harmful to the product’s finish.
•Due to the nature of steel, surface oxidation (rusting) will occur if this protective coating is scratched.
This is a natural process. To minimize this condition, it is recommended that care be taken when assembling
and handling the product in order to prevent the paint from being scratched.