Bulletin Number: 18-167-12; Date: 03/08/13 Page 1
INTRODUCTION
The purpose of this bulletin is to provide a description of current changes to Service Manuals
available via the Subaru Technical Information System (STIS) web site. The tables contained within
this bulletin are to be used as guides for becoming aware of the latest changes. We advise you to
always refer to the STIS web site when looking for the latest Service information. Printed pages will
not be made available to update printed Service Manuals.
Paper manuals may have different page numbering then what is reected below, based on
multiple new and revised pages. Please refer to the information contained on the STIS web site
for all future, update service manual information.
NUMBER: 18-167-13
DATE: 03/08/13
APPLICABILITY: 2007-2013MY Legacy/Outback
SUBJECT: Service Manual Corrections
YEAR MODEL SECTION PAGE(S) DESCRIPTION OF CHANGE
2013 Legacy/
Outback
Engine 1 FU(H4DO)-58,59 Camshaft Position Sensor testing with
Oscilloscope steps changed.
EN(H4DO)(diag)-43 Freeze Frame data display information added.
EN(H4DO)(diag)-298 Diagnostic steps for DTC P2101 changed.
Engine 2 EN(H6DO)(diag)-364 Diagnostic steps for DTC P2101 changed.
Transmission CVT-232 Cautions/note added for Reverse Brake Servicing.
CVT-266 Cautions/note added for Drive Pinion Servicing.
Chassis WT-9,10 TPMS location description updated.
PB-17 Parking Brake Shoe clearance steps changed.
PB(Diag)-23 Inspection Mode Procedure changed.
Body AC-14,80,109 New instructions and images.
GW-40,42,47 Instructions added for Windshield replacement
on EyeSight Vehicles.
GW-21,39 Power Window Motor Inspection steps changed.
PSM(Diag)-1-20 New section introduced at this update.
Please review on STIS.
CC-4 New Image.
LAN(diag)-12,14 Wiring diagrams changed.
BC(diag)-8 I/O chart updated.
BC(diag)-35 Diagnostic chart for DTC B1500 has changed.
2012 Legacy/
Outback
Transmission CVT-110 Changes made to Secondary Pressure Sensor inspections.
Chassis PB(Diag)-24 Inspection Mode Procedure changed.
Body GW-21,39 Power Window Motor Inspection steps changed.
Continued...
SERVICE BULLETIN
ATTENTION:
GENERAL MANAGER q
PARTS MANAGER q
CLAIMS PERSONNEL q
SERVICE MANAGER q
IMPORTANT - All
Service Personnel
Should Read and
Initial in the boxes
provided, right.
