Sugon I620-G20 User manual

Sugon I620-G20
User's Manual
DAWNING INFORMATION INDUSTRY CO., LTD.

ii
Statement
This manual is intended to help users to use the server product of Sugon correctly (hereinafter referred to as "This
Product"). Please read all accompanying materials carefully before you install and use this product for the first
time, especially for the considerations mentioned in this manual. This will help you to better use this product safely.
Please keep this manual properly for the future reference.
The description in this manual does not represent any description of the specification and software/hardware
configuration for this product. For the actual specification and configuration of this product, please refer to relevant
agreements, packing lists and description files of product specification and configuration, or consult with
distributor of this product.
If you fail to install, use or keep this product correctly and in accordance with the instructions and requirements of
this manual, or enable the technical personnel without the authorization of Sugon to repair and change this
product, Sugon will not be liable for any damage resulting therefrom.
The photos, graphs, charts and illustrations in this manual are provided for the purpose of interpretation and
illustration only, which may be slightly different from the actual product. Furthermore, the specification and
configuration of this product may vary according to demands. Hence, it may be different from the content of this
manual. The actual product shall prevail.
The non-Sugon website information mentioned in this manual is provided for the convenience. Such website
information is not a part of product materials of Sugon or a part of services provided by Sugon. Hence, Sugon will
not guarantee the accuracy and availability of such website information. Users shall assume the risk of using such
website by themselves.
This manual is not used to indicate that Sugon guarantees its products and services expressly or implicitly,
including (but not limited to) the guarantee of the applicability, safety, merchantability and fitness for particular
purposes for the product recommended in this manual. The guarantee and warranty commitment for this product
and related services shall be performed in accordance with applicable agreements or the terms and conditions of
the standard warranty service for this product. Sugon shall not be liable for any damage caused by your use of or
failure to use this product to the fullest extent permitted by laws and regulations (including, but not limited to, the
direct or indirect personal injury, loss of business profits, service interruption, loss of business information or any
other losses).
Sugon shall not guarantee the reliability of using the accompanying software for other products, using the
non-accompanying software or other software not the proprietary software certificated and recommended by
Sugon for this product.
Sugon has collated and checked this manual carefully, but it will not guarantee no errors and omissions are
contained in this manual. In order to provide better services, Sugon may improve or change the product software
and hardware described in this manual and the content of this manual without prior notice. If you find any
discrepancy between this product and this manual when you use this product, or you want to obtain the latest
information or have any question and idea, welcome to call 400-810-0466 or access the service website of Sugon
www.sugon.com for the consultation.

iii
Trademark and Copyright
"SUGON" and its icon are the trademark or registered trademark of DAWNING INFORMATION INDUSTRY CO.,
LTD.
"SUGON" and its icon are the trademark or registered trademark of DAWNING INFORMATION INDUSTRY CO.,
LTD. "DAWNING INFORMATION INDUSTRY CO., LTD" is hereinafter referred to as "Sugon".
"Intel" and "Xeon" icons are the registered trademarks of Intel.
“Microsoft”, “Windows”, “Windows Server” and “Windows Server System” are the trademarks or registered
trademarks of Microsoft.
Other products, logos and trademarks which are mentioned in this manual but not listed above may also be
trademarks or registered trademarks of other companies, and are owned by their respective companies, other
organizations or individuals.
The accompanying software described in this user's manual is provided according to the terms and conditions of
the end user license agreement, and can only be used and reproduced in accordance with the provisions of the
end user license agreement.
Copyright © 2013 DAWNING INFORMATION INDUSTRY CO., LTD. All rights reserved.
This manual is protected by the copyright laws and regulations, and all or any part of this manual shall not be
reproduced, copied, deleted or compiled into the machine-readable format in any way without the prior written
authorization of Sugon, or stored in the retrieval system in any form, or transmitted over the wired or wireless
network, or translated into any text in any way.

iv
Operating Instruction for Power Supply
Switch on power supply for servers
To switch on the power supply for servers, please press the "ON/OFF" button.
Switch off power supply for servers
1. Backup the server data.
2. Shut down the operating system in accordance with the instruction of the operating system document.
(If the operating system puts the server in standby mode automatically, skip the next step.)
3. Press the "ON/OFF" button to put the server in the standby mode. When the server activates the Wait for
Power mode, the system power LED indicator will change to red.
4. Unplug all power cords. At present, the system is in the Power-off status.
Requirement for Power Supply
This equipment shall be installed in accordance with the local or regional electrical regulations on the installation
of information technology equipment, and the installation procedure shall be completed by the recognized
electrical engineer. The equipment is designed elaborately and can operate in the installation environment that
complies with the national power supply specification. For the power supply rating of relevant options, please refer
to the product rating label or the accompanying user document of the option.
When more than one server are installed, other power distribution equipment may be needed to supply the power
for all equipment safely. Please observe the following guidelines:
Balance the server power supply load between the available AC power supply branch circuits.
The total AC current load of the system is not allowed to exceed 80 percent of the AC current rating for the
branch circuit.
Do not use the ordinary power wiring board to connect with this equipment.
The server is powered by the separate circuit.
Requirements for Electrical Grounding
The server shall be grounded properly to make it operates normally and ensure safety. This equipment shall be
installed in accordance with the following requirements: Any regional or national/local electrical connection
procedure, such as part 1 - 7 of IEC rules 364. Furthermore, it is necessary for you to ensure that all power
distribution equipment used during the installation (such as the branch connection and socket) is of the listed or
certificated ground type equipment.
For several servers connecting to the same power supply are needed to lead a large amount of electric current
into underground, Sugon suggests the used PDU is connected to the branch circuit of buildings fixedly or
equipped with one non-detachable wire which is connected with the industrial plug. All plugs which comply with
the IEC 60309 standard shall be considered as applicable plugs. It is not suggested to use the ordinary power
wiring board to connect with this server.

v
Electrostatic Discharge
Electrostatic Discharge Prevention
In order to prevent from damaging the system, it is necessary to take necessary precautions when you install the
system or take out/put in the component. The static electricity discharged by fingers or other conductors may
damage the main board or other electrostatic sensitive equipment. The electrostatic damage will shorten the
expected service life of above-mentioned equipment. To prevent the electrostatic damage, attention shall be paid
to the following aspects:
The product shall be packed in the anti-static package to prevent from touching the product by hands directly
during the transportation and storage.
Before the electrostatic sensitive components are transported to the work place which is not affected by static
electricity, put them in their respective package for storage.
Take out the equipment from their package, and do not put it down, but install it into the server directly. If you
want to put down the equipment, put it back in the anti-static package. Do not put the equipment on the outer
cover or metal surface of the server.
When the equipment is still in the anti-static package, the equipment shall contact the unpainted outer metal
surface of the server for 2 seconds at least. In this way, it can implement the electrostatic discharge of the
anti-static package and your body.
Minimize the movement. The movement will lead to the accumulation of static electricity around your body.
Hold the edge or frame of the equipment, and operate the equipment carefully.
Do not touch the welding point, pin or exposed circuit.
Do not put the equipment in the place where other people can touch and damage it.
When you touch the electrostatic sensitive components or devices, it is necessary to take appropriate grounding
measures.
You should take particular care when operating the equipment in cold weather. The heating system will reduce
indoor humidity and increase static electricity.
Grounding Method for Electrostatic Discharge Prevention
There are several grounding methods. You can use one or more of the following methods when you take out/put in
or install the electrostatic sensitive components:
You can use the wrist strap, which is connected with the grounding work area or computer chassis by grounding
wire. The wrist strap shall be scalable flexibly, and the resistance of the grounding wire shall be 10 percent of 1
Mega ohms at least. To achieve the grounding purpose, the wrist strap shall be close to the skin tightly when you
put on it.
Use the heel strap, toe strap or boot strap in the vertical work area. Tie the belt on your feet when you stand on
the conductive floor or dissipative static floor mat.
Use the conductive field maintenance tool.

vi
Combine with the use of dissipative static folding tool pad and portable field maintenance kit.
Dangerous Warning Statement
[Warning]
This product is of the grade A product. The product may cause the radio interference in the living environment. In
this case, it may require users take practical measures to prevent the interference.
The current in the power supply, telephone and communication cable is dangerous. In order to eliminate the risk
of electric shock:
Do not connect or disconnect any cable, or install, maintain, or reconfigure this product during the lightning.
Connect all power cords to the power supply socket with the correct wiring and proper grounding.
Connect all equipment which needs to be connected to this product to the socket with the correct wiring.
Connect or disconnect the signal cable by one hand as far as possible.
Do not turn on any equipment when there is signs of fire, flood or house collapse.
Unless otherwise stated during the installation and configuration, disconnect the connected power cord, remote
communication system, network and modem before you open the outer cover of the equipment.
Statement 1:
[Note]
The power control button on the equipment and the power switch the power supply will not disconnect the current
of the supply equipment. The equipment may be also provided with more than one power cord. To enable the
equipment to be powered off completely, ensure all power cords are disconnected with the power supply.
Statement 2:
[Note]
Do not remove the outer cover of power supply or the outer cover of any component with the following label. There
is dangerous voltage, current and energy level in any component with this label. There is not any maintainable
component in these components. If you suspect some component with any problem, please contact technical
service personnel.
Statement 3:
[Danger]
In some cases, the high branch circuit load may cause the fire and electrical shock hazard. In order to prevent
such risks, ensure that the electrical requirements of the system does not exceed the protection requirements of
the branch circuit. Refer to the accompanying information of the equipment to understand the electrical
specification.

vii
Operate in the interior of power-on server.
[Warning]
When the server is powered on, the static electricity discharged into the internal components of the server may
cause the server to abort abnormally, which may cause data loss. To prevent this potential problem, please always
use the ESD wrist strap or other grounding systems when you operate inside the power-on server. The server
(some models) supports the hot plug equipment and is designed to operate safely when the server is powered on
and the outer cover is removed. Please observe the following guidelines below when you operate inside the
power-on server.
Prevent from putting on clothes with loose cuffs. Clamp the button on the cuffs of long sleeve shirt before you
operate it in the server internally. Do not wear any cuff links when you operate inside the server.
Do not let tie or scarf down into the server.
Take off all jewelries, such as bracelet, necklace, ring and loose wrist watch.
Take out items in shirt pocket (such as pen and pencil) which may fall into the server when you bend over the
server.
Prevent any metal items (such as paper clip, hair clip and screw) from falling into the server.
Statement 4:
In order to reduce the risk of personal injury, fire or equipment damage, the AC power supply branch circuit
powered for the rack shall not be overloaded. Please consult with the electrical agency who formulates the
equipment wiring and installation requirements.
Statement 5:
Use the adjustable UPS to prevent the server from being affected by the power fluctuation and temporary power
outage. This equipment can prevent the hardware from being damaged by the impact of surge and peak voltage,
and maintain the system in normal operation state during power failure.
Statement 6:
When you use the cable management arm component, each cable shall be kept loose to prevent from damaging
the cable when taking out server from the rack.
Statement 7:
To reduce the risk of electric shock or equipment damage, attention shall be paid to the following aspects:
Make sure to use the grounding plug of the power cord. The grounding plug can perform important safety
protection function.
Always plug the power cord into the nearby accessible grounding power socket.
Unplug the power cord to disconnect the power supply of the equipment.
Do not put power cord in a place where it is easy to be stepped on or squeezed by the object beside it. Special

viii
attention shall be paid to the plug, power socket and the connection point between power line and server.

ix
Statement .............................................................................................................................ii
Trademark and Copyright....................................................................................................iii
Operating Instruction for Power Supply...............................................................................iv
Dangerous Warning Statement ...........................................................................................vi
List of Figures.....................................................................................................................xii
List of Tables................................................................................................................... xviii
1System Overview ............................................................................................................ 1
1.1I620-G20 ........................................................................................................ 1
1.2 Product Features............................................................................................ 1
1.3 Product Specification...................................................................................... 3
1.3.1 Technical Specification..............................................................................................................3
1.3.2 Application Environment of Products.......................................................................................4
Table 1-3 Operation environment of products..................................................................... 4
2Architecture and Installation ............................................................................................ 4
2.1 Product components ...................................................................................... 4
2.1.1 Front panel component..............................................................................................................5
2.1.2 Rear panel component...............................................................................................................8
2.2 Disassembly of product chassis and main components................................. 9
2.2.1 Preparation prior to power on...................................................................................................9
2.2.2 Steps for uncovering server....................................................................................................10
2.2.3 Removing CPU .........................................................................................................................11
2.2.4 Removal steps of CPU heat radiators...................................................................................14
2.2.5 Memory disassembly steps.....................................................................................................15
2.2.6 Hard disk disassembly steps ..................................................................................................17
2.2.7 Power disassembly steps........................................................................................................18

x
2.2.8 Disassembly steps of expansion cards.................................................................................19
2.2.9 Disassembly steps of fan.........................................................................................................20
2.2.10 Installation instruction of guide components.........................................................................21
3Product configuration .................................................................................................... 27
3.1 LCD module ................................................................................................. 27
3.1.1 Typical application....................................................................................................................27
3.1.2 Function description.................................................................................................................27
3.1.3 Inquiry and operation of system-related information...........................................................28
3.2 Eliminate CMOS jumper setting ................................................................... 32
3.3 BIOS setup................................................................................................... 33
3.3.1 System BIOS setup method....................................................................................................33
3.3.2 Main menu.................................................................................................................................34
3.3.3 Advanced menu........................................................................................................................35
3.3.4 Chipset menu............................................................................................................................44
3.3.5 Server Mgmt menu...................................................................................................................61
3.3.6 Security menu ...........................................................................................................................69
3.3.7 Boot menu..................................................................................................................................70
3.3.8 Save & Exit menu.....................................................................................................................71
3.4 BMC configuration........................................................................................ 71
3.4.1 Dashboard.................................................................................................................................73
3.4.2 FRU & DMI.................................................................................................................................75
3.4.3 Server Health.............................................................................................................................78
3.4.4 Component Information...........................................................................................................82
3.4.5 Configuration.............................................................................................................................88
3.4.6 Remote Control.......................................................................................................................107
3.4.7 Auto Video Recording............................................................................................................115
3.4.8 Maintenance............................................................................................................................116
3.4.9 Firmware Update ....................................................................................................................118
4OS installation guide ................................................................................................... 120

xi
4.1 Windows 2008 Enterprise Server R2 SP1 64bit......................................... 120
4.2 Red Hat Enterprise Linux AS 6 Update 2 X86_64...................................... 120
5FAQ of products .......................................................................................................... 122
Appendix I Abbreviations.............................................................................................. 122
Appendix II POST code check point of LCD.................................................................... 124
Appendix III RAID configuration description of onboard hard disk controller................... 131

xii
List of Figures
Figure 2-1 Schematic diagram of front panel..................................................................................11
Figure 2-2 Schematic diagram of reset key................................................................................... 12
Figure 2-3 Schematic diagram of hard disk indicator .................................................................... 12
Figure 2-4 Rear view of product..................................................................................................... 14
Figure 2-5 Uncover chassis............................................................................................................ 16
Figure 2-6 Take air director and line shielding cover ..................................................................... 16
Figure 2-7 CPU Socket schematic diagram................................................................................... 17
Figure 2-8 Schematic diagram for opening CPU locking rod ........................................................ 17
Figure 2-9 Schematic diagram for opening CPU protective cover ................................................ 17
Figure 2-10 CPU installation .......................................................................................................... 18
Figure 2-11 CPU locking ................................................................................................................ 18
Figure 2-12 Install CPU heat radiator............................................................................................. 19
Figure 2-13 Schematic diagram of memory installation................................................................. 21
Figure 2-14 Lock hard disk box fastener........................................................................................ 21
Figure 2-15 Pull out hard disk box ................................................................................................. 21
Figure 2-16 Fix hard disk................................................................................................................ 22
Figure 2-17 Press locking buckle................................................................................................... 22
Figure 2-18 Plug out the power module......................................................................................... 22
Figure 2-19 Installation of expansion card..................................................................................... 23
Figure 2-20 Fan pull-out schematic diagram ................................................................................. 24
Figure 2-21 Guide components...................................................................................................... 24
Figure 2-22 Fixing position of front support of sliding rail.............................................................. 25
Figure 2-23 Pull out internal guide................................................................................................. 25
Figure 2-24 Installation method of internal rail............................................................................... 26
Figure 2-25 Install external guide to cabinet upright post.............................................................. 26
Figure 2-26 Upright post position diagram..................................................................................... 27
Figure 2-27 Install machine onto external rail................................................................................ 27
Figure 2-28 Lock external guide..................................................................................................... 28
Figure 2-29 Install the chassis in place and lock it ........................................................................ 28
Figure 2-30 Unlock chassis............................................................................................................ 29
Figure 3-1 LCD display module layout diagram............................................................................. 29
Figure 3-2 LCD principle flowchart................................................................................................. 31
Figure 3-3 Initial interface............................................................................................................... 31
Figure 3-4 Display mode of fan status........................................................................................... 32
Figure 3-5 Display mode of CPU temperature status.................................................................... 32

xiii
Figure 3-6 BMC IP address format ................................................................................................ 33
Figure 3-7 System status ............................................................................................................... 33
Figure 3-8 Main menu interface..................................................................................................... 36
Figure 3-9 Advanced menu interface............................................................................................. 37
Figure 3-10 Benchmark Recommendation Setting menu interface............................................... 38
Figure 3-11 ACPI Settings interface............................................................................................... 38
Figure 3-12 Wakeup Event Setup interface................................................................................... 39
Figure 3-13 Serial Port Console Redirection interface .................................................................. 40
Figure 3-14 (COM0) Console Redirection Settings interface ........................................................ 40
Figure 3-15 (EMS) Console Redirection Settings configuration interface..................................... 41
Figure 3-16 PCI Subsystem Settings configuration interface........................................................ 42
Figure 3-17 Network Stack Configuration interface....................................................................... 43
Figure 3-18 CSM Configuration interface ...................................................................................... 43
Figure 3-19 H/W Monitor menu interface....................................................................................... 45
Figure 3-20 Chipset menu interface............................................................................................... 46
Figure 3-21 Processor Configuration menu interface.................................................................... 47
Figure 3-22 Advanced Power Management Configuration menu interface................................... 49
Figure 3-23 CPU P State Control menu interface.......................................................................... 50
Figure 3-24 CPU C State Control menu interface ......................................................................... 50
Figure 3-25 Common RefCode Configuration menu interface...................................................... 51
Figure 3-26 QPI Configuration menu interface.............................................................................. 52
Figure 3-27 QPI General Configuration menu interface................................................................ 52
Figure 3-28 QPI Status menu interface ........................................................................................ 53
Figure 3-29 Memory Configuration menu interface....................................................................... 53
Figure 3-30 Memory Map menu interface...................................................................................... 54
Figure 3-31 Memory RAS Configuration menu interface............................................................... 54
Figure 3-32 IIO Configuration menu interface................................................................................ 55
Figure 3-33 IOAT Configuration menu interface............................................................................ 55
Figure 3-34 Intel VT for Directed I/O (VT-d) menu interface.......................................................... 56
Figure 3-35 PCH Configuration menu interface............................................................................. 57
Figure 3-36 PCH Devices menu interface ..................................................................................... 57
Figure 3-37 PCH sSATA Configuration menu interface................................................................. 58
Figure 3-38 PCH SATA Configuration menu interface................................................................... 59
Figure 3-39 USB Configuration menu interface............................................................................. 59
Figure 3-40 Server Mgmt menu interface...................................................................................... 60
Figure 3-41 System Event Log menu interface.............................................................................. 62
Figure 3-42 BMC self-test log menu interface ............................................................................... 62

xiv
Figure 3-43 BMC Network Configuration menu interface.............................................................. 63
Figure 3-44 View System Event Log menu interface..................................................................... 64
Figure 3-45 BMC User Settings menu interface............................................................................ 64
Figure 3-46 Add User menu interface............................................................................................ 65
Figure 3-47 Delete Users menu interface...................................................................................... 65
Figure 3-48 Change User Settings menu interface ....................................................................... 66
Figure 3-49 Security menu interface.............................................................................................. 67
Figure 3-50 Boot menu interface.................................................................................................... 67
Figure 3-51 Save & Exit menu interface........................................................................................ 68
Figure 3-52 login interface.............................................................................................................. 69
Figure 3-53 User entry interface .................................................................................................... 69
Figure 3-54 Management platform items....................................................................................... 69
Figure 3-55 Device information module......................................................................................... 70
Figure 3-56 Network information module....................................................................................... 71
Figure 3-57 Remote console module............................................................................................. 71
Figure 3-58 Sensor information module (part)............................................................................... 72
Figure 3-59 Event log module........................................................................................................ 72
Figure 3-60 FRU&DMI sub-menu .................................................................................................. 73
Figure 3-61 FRU information interface........................................................................................... 73
Figure 3-62 DMI information interface............................................................................................ 74
Figure 3-63 Server Health submenu.............................................................................................. 75
Figure 3-64 Sensor reading main interface.................................................................................... 75
Figure 3-65 Sensor list area (part)................................................................................................. 76
Figure 3-66 Detailed sensor information area................................................................................ 76
Figure 3-67 Threshold setup interface........................................................................................... 77
Figure 3-68 Sensor event statistics diagram.................................................................................. 77
Figure 3-69 Time log interface ....................................................................................................... 77
Figure 3-70 System Log interface.................................................................................................. 78
Figure 3-71 Audit Log interface...................................................................................................... 78
Figure 3-72 BSOD Screen interface .............................................................................................. 79
Figure 3-73 CPU information display............................................................................................. 79
Figure 3-74 Memory information interface..................................................................................... 80
Figure 3-75 Onboard Hard Disk information interface................................................................... 80
Figure 3-76 Hard Disk information interface.................................................................................. 81
Figure 3-77 PCIe Device information interface.............................................................................. 81
Figure 3-78 PSU information interface........................................................................................... 82
Figure 3-79 FAN information interface........................................................................................... 82

xv
Figure 3-80 Onboard NIC information interface............................................................................. 83
Figure 3-81 Expander NIC information interface ........................................................................... 83
Figure 3-82 Configuration submenu interface................................................................................ 84
Figure 3-83 Active directory interface............................................................................................. 84
Figure 3-84Advanced active directory setup interface.................................................................. 84
Figure 3-85 Role group addition interface...................................................................................... 85
Figure 3-86 Advanced Audit Log interface..................................................................................... 86
Figure 3-87 DNS interface.............................................................................................................. 87
Figure 3-88 LDAP/E-Directory interface ........................................................................................ 88
Figure 3-89 Advanced LDAP setup interface................................................................................. 88
FIgure 3-90 Mouse mode interface................................................................................................ 89
FIgure 3-91 Management network setup interface........................................................................ 90
FIgure 3-92 Network bonding setup interface................................................................................ 90
Figure 3-93 NTP setup interface.................................................................................................... 91
Figure 3-94 PEF management interface........................................................................................ 91
Figure 3-95 Event Filter addition interface -1................................................................................. 92
Figure 3-96 Event Filter addition interface -2................................................................................. 92
Figure 3-97 Figure 3-97Event Filter addition interface -3.............................................................. 93
Figure 3-98 Figure 3-98 Event Filter addition interface -4............................................................. 93
Figure 3-99 Alert Policy addition item interface.............................................................................. 94
Figure 3-100 LAN Destination addition item interface................................................................... 94
Figure 3-101 RADIUS interface ..................................................................................................... 95
Figure 3-102 Remote conference interface ................................................................................... 95
FIgure 3-103 SMTP interface......................................................................................................... 96
Figure 3-104 SSL authentication configuration interface............................................................... 97
Figure 3-105 Generate SSL item interface.................................................................................... 98
FIgure 3-106 View SSL item interface ........................................................................................... 98
Figure 3-107 System and audit log setup interface....................................................................... 98
FIgure 3-108 System firewall setup interface................................................................................. 99
Figure 3-109 IP address policy addition interface.......................................................................... 99
Figure 3-110 Port policy addition interface................................................................................... 100
Figure 3-111 Advanced setup interface........................................................................................ 100
Figure 3-112 Users interface........................................................................................................ 100
Fihure 3-113 User addition interface............................................................................................ 101
Figure 3-114 Virtual Media interface............................................................................................ 102
Figure 3-115 User lock setup interface ........................................................................................ 102
Figure 3-116 Remote control submenu........................................................................................ 102

xvi
Figure 3-117 Console Redirection interface................................................................................. 102
Figure 3-118 Redirection interface............................................................................................... 103
Figure 3-119 Virtual media mounting interface............................................................................ 103
Figure 3-120 Video submenu....................................................................................................... 104
Figure 3-121 Keyboard submenu................................................................................................. 105
Figure 3-122 Keyboard Layout submenu..................................................................................... 105
Figure 3-123 Video Record submenu.......................................................................................... 105
Figure 3-124 Video recording setup interface.............................................................................. 106
Figure 3-125 Power submenu...................................................................................................... 106
Figure 3-126 Power Control and Status....................................................................................... 107
Figure 3-127 Java SOL interface ................................................................................................. 107
Figure 3-128 Serial port redirection setup interface..................................................................... 108
Figure 3-129 Session submenu................................................................................................... 108
Figure 3-130 ID control interface.................................................................................................. 108
Figure 3-131 Power button setup interface.................................................................................. 109
Figure 3-132 Fan policy setup interface....................................................................................... 109
Figure 3-133 BIOS first start item selection interface.................................................................. 109
Figure 3-134Automated video recording submenu......................................................................110
Figure 3-135 Trigger condition setup interface.............................................................................110
Figure 3-136 Recorded video list interface...................................................................................110
Figure 3-137 Maintenance submenu ............................................................................................111
Figure 3-138 Setup interface for keeping existing configuration ..................................................111
Figure 3-139 Factory setting recovery setup interface .................................................................111
Figure 3-140 Firmware Update submenu.....................................................................................112
Figure 3-141 BMC firmware upgrade interface.............................................................................112
Figure 3-142 Selection interface of BMC firmware upgrade and refreshing module ...................112
Figure 3-143 BIOS firmware refreshing interface.........................................................................113
Figure 3-144 BIOS firmware refreshing alert interface.................................................................113
FIgure 0-1 POST prompt interface............................................................................................... 125
Figure 0-2 RAID management interface...................................................................................... 125
Figure 0-3 Controller menu interface ........................................................................................... 126
Figure 0-4 RAID creation interface............................................................................................... 126
Figure 0-5 Hard disk selection ..................................................................................................... 127
Figure 0-6 Advanced setup interface ........................................................................................... 127
Figure 0-7 Delete Virtual Drive..................................................................................................... 128
Figure 0-8 Delete Drive Group..................................................................................................... 128
Figure 0-9 Clear RAID configuration information.................................................................................... 129

xvii

xviii
List of Tables
Table 1-1 I620-G20 parameter table (for four device types)............................................................ 7
Table 1-2 Model parameter table of different disks.......................................................................... 8
Table 1-3 Operation environment of products.................................................................................. 9
Table 2-1 Description of key functions............................................................................................11
Table 2-2 Description of front panel LED indicator function............................................................11
Table 2-3 Description of hard disk rear board indicator................................................................. 13
Table 2-4 Interface description of rear panel.................................................................................. 14
Table 2-5 Memory installation rule table①..................................................................................... 19
Table 3-1 Interface description....................................................................................................... 29
Table 3-2 Failure information report............................................................................................... 34
Table 3-3 CMOS jumper clearing description ................................................................................ 34
Table 3-4 Description of control key............................................................................................... 35
Table 3-5 Description of Main interface parameters...................................................................... 36
Table 3-6 Description of Advanced interface parameters.............................................................. 37
Table 3-7 Description of Benchmark Recommendation Setting interface parameter.................... 38
Table 3-8 Description of ACPI Settings interface parameters........................................................ 39
Table 3-9 Description of Wakeup Event Setup interface parameters............................................ 39
Table 3-10 Description of Serial Port Console Redirection interface............................................. 40
Table 3-11 Description of (COM0) Console Redirection Settings.................................................. 40
Table 3-12 Description of (EMS) Console Redirection Settings configuration interface ............... 41
Table 3-13 Description of PCI Subsystem Settings configuration interface.................................. 42
Table 3-14 Description of network Stack Configuration interface.................................................. 43
Table 3-15 Description of CSM Configuration interface................................................................. 43
Table 3-16 Description of H/W Monitor interface parameter.......................................................... 45
Table 3-17 Description of Chipset interface parameter.................................................................. 46
Table 3-18 Description of Processor Configuration interface parameters..................................... 47
Table 3-19 Description of Advanced Power Management Configuration interface parameters.... 49
Table 3-20 Description of CPU P State Control interface parameter............................................. 50
Table 3-21 Description of CPU C State Control interface parameter ............................................ 50
Table 3-22 Description of Common RefCode Configuration interface parameter......................... 51
Table 3-23 Description of QPI Configuration interface parameter................................................. 52
Table 3-24 Description of QPI General Configuration interface parameter................................... 52
Table 3-25 Description of Memory Configuration interface parameter.......................................... 53
Table 3-26 Description of Memory Map interface parameter......................................................... 54

xix
Table 3-27 Description of memory RAS Configuration interface parameter.................................. 54
Table 3-28 Description of IIO Configuration interface parameter .................................................. 55
Table 3-29 Description of IOAT Configuration interface parameter............................................... 55
Table 3-30 Description of Intel VT for Directed I/O (VT-d) interface parameter............................. 56
Table 3-31 Description of PCH Configuration interface parameter................................................ 57
Table 3-32 Description of PCH Devices interface parameter........................................................ 57
Table 3-33 Description of PCH sSATAConfiguration interface parameter.................................... 58
Table 3-34 Description of PCH SATA Configuration interface parameter...................................... 59
Table 3-35 Description of Server Mgmt interface parameter......................................................... 60
Table 3-36 Interface parameter description of Server Mgmt ......................................................... 60
Table 3-37 Description of system Event Log interface parameter................................................. 62
Table 3-38 Description of BMC self-test log interface parameter.................................................. 62
Table 3-39 Description of BMC Network Configuration interface parameter................................. 63
Table 3-40 Description of BMC User Settings interface parameter............................................... 64
Table 3-41 Description of BMC User Settings interface parameter............................................... 65
Table 3-42 Description of Delete User interface parameter........................................................... 65
Table 3-43 Description of Change User Settings interface parameter.......................................... 66
Table 3-44 Description of security interface parameter ................................................................. 67
Table 3-45 Description of Boot interface parameter ...................................................................... 67
Table 3-46 Description of Save & Exit interface parameter ......................................................... 68
Table 3-47 Description of management platform........................................................................... 69
Table 3-48 Description of basic information................................................................................... 73
Table 3-49 Description of Chassis Information .............................................................................. 73
Table 3-50 Description of Board Information.................................................................................. 73
Table 3-51 Description of Product Information............................................................................... 74
Table 3-52 Description of BIOS Information................................................................................... 74
Table 3-53 Description of System Information............................................................................... 74
Table 3-54 Description of Board Information.................................................................................. 74
Table 3-55 Description of temperature sensor threshold............................................................... 76
Table 3-56 Description of CPU information.................................................................................... 79
Table 3-57 Description of Memory information .............................................................................. 80
Table 3-58 Description of Onboard Hard Disk information............................................................ 80
Table 3-59 Description of Hard Disk information............................................................................ 81
Table 3-60 Description of PCIe Device information....................................................................... 81
Table 3-61 Description of PSU information.................................................................................... 82
Table 3-62 Description of FAN information .................................................................................... 82
Table 3-63 Description of Onboard NIC information...................................................................... 83

xx
Table 3-64 Description of Expander NIC information..................................................................... 83
Table 3-65 Description of BIOS Information................................................................................... 84
Table 3-66 Description of role group addition interface ................................................................. 85
Table 3-67 Description of Advanced auditing log setup interface.................................................. 86
Table 3-68 Description of DNS setup interface.............................................................................. 87
Table 3-69 Description of advanced LDAP setup interface ........................................................... 88
Table 3-70 Network setup interface information ............................................................................ 90
Table 3-71 Information description of Event Filter item information............................................... 92
Table 3-72 Information description ofAlert Policy item information............................................... 92
Table 3-73 Information description of LAN Destination item information....................................... 91
Table 3-74 Description of Event Filter adding items ...................................................................... 93
Table 3-75 Description of Alert Policy adding items....................................................................... 94
Table 3-76 Description of LAN Destination adding items............................................................... 94
Table 3-77 Description of RADIUS interface information............................................................... 95
Table 3-78 Description of Remote Session interface information.................................................. 96
Table 3-79 Description of SMTP interface information .................................................................. 96
Table 3-80 Description of Generate SSL interface information...................................................... 98
Table 3-81 Description of system and audit log setup interface information................................. 99
Table 3-82 Description of user information item addition............................................................. 101
Table 3-83 Description of Power option....................................................................................... 107
Table 3-84 Description of serial port redirection setup interface.................................................. 108
Table 3-85 Description of trigger condition....................................................................................110