BOB SLEDGE SULOV
Instructions for use
A single-seat bob sledge is designed for an individual downhill ride or for towing on a level
surface with the help of a second person (not by a motor vehicle). In both cases, the ride
must be carried out on a continuous snow cover without dust or chemical scattering
in the temperature range of -20 ° C to + 20 ° C.
Safety recommendations
WARNING: The toy should be used with caution, as skills are required to prevent falls
and collisions that could cause injury to the user or other persons. Pay attention to your
choice of terrain.
We recommend using a ski helmet when driving bob sledge.
While driving downhill, please ensure that the tow strap is always inside the bob sledge
and it does not slip under the body of the bob sledge or out to the sides, which could
cause a fall or a collision if the strap is caught.
Choosing location and terrain for driving
Select the location and terrain for a ride to be able to safely control the bob sledge
and avoid crash into solid obstacles or collisions with other people. When driving, avoid
crossing over stones or curbs that can irreparably damage the product.
The ride should take place at a sufficient / safe distance from the road for motor vehicles.
Age and weight limitation
WARNING: Not suitable for children under 3 years of age.
The product is designed for the individual ride of children over 5 years of age. Younger
children should only use the bob sledge under the supervision of an adult because their
motor skills, stability and body strength may not yet be sufficient to safely control the bob
sledge, and thus risk a fall or collision.
The maximum load capacity of the product is 50 kg.
Driving Technique
While riding, sit inside the bob sledge, put your legs on the front of the bob sledge body
and hold both brake levers with both hands. Adjust the driving direction by lifting
the right or left brake lever. You can slow down or fully stop the ride by lifting both brake
levers at once.
Maintenance and storage
Any product modifications are prohibited.
We recommend using only water, soap and a soft cloth to clean the product.
The surface of the product must not come into contact with other chemical cleaners,
solvents, paints or adhesives.
The product should not be exposed to direct sunlight and high temperatures.
We recommend to store it in a dry and dark place.
Assembling
The bob sledge includes 2 brake levers and a tow strap. Brake levers and tow strap need
to be assembled by the user himself.
The brake levers need to be inserted into the holes on the sides of the bob sledge body
so that both lateral protrusions in the hole fit in the double-sided groove on the brake
lever, then recline the upper part of the brake lever downwards.
Pass the strap through the two holes in the front of the bob sledge and fasten it
from the underside by the knot at both ends of the strap.
The product conforms to: Certification made by:
EN 71-1:2015 Strojírenský zkušební ústav, s.p.
EN 71-3+A1:2015 Certificate number: E-30-20271-17
Import and Distribution for EU: RULYT s.r.o., 5. kvetna 435, 440 01 Dobromerice (CZ)
Made in China.
