Summerset SSVH-36 User manual

VENT HOOD MANUAL

INSTALLATION INSTRUCTIONS & OWNER’S MANUAL
VENTHOOD 36”
SSVH36
NAME:
PART #:
VENTHOOD 48”
SSVH48
VENTHOOD 60”
SSVH60
THANK YOU
FOR YOUR RECORDS
INSTALLER:
Thank you for your purchase. We’d like to welcome you to the Summerset family of luxury
outdoor kitchen products and look forward to being a part your home for years to come. As a
family business with over 30 years of industry experience, we aim to deliver exceptional quality
and personal service. Welcome to the Summerset family and we hope you love your new grill!
Please record the following information and refer to it when contacting Summerset Professional
Grills or an authorized dealer. The serial number is located on the rating plate. The rating plate
is located on the exterior basin of the grill (fire box) and on the underneath side of the drip tray
(select models only).
Serial Number:
Model:
Date of Purchase:
Place of Purchase:
Please leave this manual for the owner
To view on your phone, scan the QR code on your smart phone’s
camera app. (For Android devices, use Google Lens.)
For warranty information and to register your grill
visit, Summersetgrills.com/register/venthood

1
REPLACEMENT PARTS LIST
VENT HOOD SERIES REPLACEMENT PARTS LIST
ITEM # DESCRIPTION SSVH-36 QTY SSVH-48 QTY SSVH-60 QTY
*1 1/2” MOUNTING TEMPLATE SSVH-36-SPT 1SSVH-48-SPT 1SSVH-60-SPT 1
*2 8” VENT HOOD SPACER SSVH-36-SP8 1SSVH-48-SP8 1SSVH-60-SP8 1
*3 VENT HOOD DUCT COVER SSVH-36-DC 1SSVH-48-DC 1SSVH-60-DC 1
4VENT HOOD ASSEMBLY 20158 120159 120152 1
5CONTROL KNOB 10482 210482 210482 2
6VARIABLE SPEED FAN CONTROL 10483 210483 210483 2
7HALOGEN LAMP 10480 210480 3 10480 3
8PORCELAIN LIGHT SOCKET 10481 210481 3 10481 3
9VENT HOOD FILTER 31812 8 31812 12 31812 16
10 BLOWER PLATE 32035 232035 232035 2
11 BLOWER, MOTOR 10521 210521 210521 2
12 TRANSITION COLLAR FOR 10” VENT 60356 160356 160356 1
*NOT SHOWN 4” VENT HOOD SPACER SSVH-36-SP4 1SSVH-48-SP4 1SSVH-60-SP4 1
NOT SHOWN VENT HOOD MOTOR COVER 31803 131803 131803 1
NOT SHOWN WIRE HARNESS, BLOWER 10589 110589 110589 1
NOT SHOWN WIRING HARNESS KIT 10531 110532 110533 1
*SOLD AS AN ACCESSORY ITEM

2
SSVH-48
EXPLODED VIEW

3
IMPORTANT SAFETY INSTRUCTIONS
-IMPORTANT SAFETY INSTRUCTIONS -
1. Use this unit only in the manner
intended by the manufacturer. (If you
have questions, contact Summerset at
800.966.8126)
2. Before servicing or cleaning this unit,
switch power off at service panel and lock
the panel to prevent power from being
switched on by accident. If the service
panel cannot be locked, securely fasten a
prominent warning device, such as a tag,
to the service panel.
• Remove all rings, watches, belt buckles,
jewelry and any clothing with metal buons
or snaps to prevent damage to hood.
• DO NOT REMOVE HOOD FROM ITS
ORIGINAL CARTON UNTIL YOU ARE READY
TO INSTALL IT.
• When you are ready to begin the installation
• Process, remove the hood from its carton
and place it on a clean so blanket.
• Inspect the hood carefully for any damage or
imperfections before you begin to install the
hood. If any damage or imperfections exist,
re -carton the
• Hood and call your dealer IMMEDIATELY. Do
not install a damaged hood.
• It is highly recommended that rubber gloves
be used to prevent scratches on the hood
and to provide you with a firm grip.
• When removing the hood from the carton,
locate the filters. The filters are not pre
-installed in the hood. The filters are in a box
marked filters inside the hood carton.
• RVH model hood series can be ducted to
the top or the rear. Check product guide
for additional transitions, wall caps and roof
caps.
• All Summerset ventilation hoods have a
variable speed control blower switch as well
as a light dimmer switch.
• To avoid damage that will not be covered
under warranty make sure blowers are free
from obstructions (packing and debris) prior
to running the blowers. Test run blowers
before finalizing installation. Check with
manufacturer before aempting to use
blower systems other than Summerset Grills
blower systems. (800.966.8126 for technical
information).
1. Never leave surface units unaended at
high seings.
2. Oil-overs can cause smoking and may
ignite. Heat oils slowly on low heat.
3. Always turn hood ON five minutes prior
to cooking to begin airflow.
4. Clean ventilation filters frequently. DO
NOT ALLOW GREASE TO ACCUMULATE
ON FAN OR FILTER.
5. Use proper pan size. Always use cookware
appropriate for the size of the burner or
element.
1. Smother the flames with a close-fiing
lid, cooking sheet or other metal tray, and
then turn off the burner. BE CAREFUL TO
PREVENT BURNS. If the flames do not go
out immediately, EVACUATE AND CALL
THE FIRE DEPARTMENT.
2. NEVER PICK UP A FLAMING PAN.
3. MAKE SURE YOUR VENTILATION
SYSTEM IS COMPLETELY TURNED OFF.
DO NOT TURN HOOD ON TO TRY AND
EVACUATE SMOKE.
CAUTION: FOR GENERAL VENTILATION
USE ONLY. DO NOT USE TO EXHAUST
HAZARDOUS OR EXPLOSIVE MATERIALS
OR VAPORS.
WARNING: TO REDUCE THE RISK OF
RANGE TOP GREASE FIRE, PLEASE
OBSERVE THE FOLLOWING:
WARNING - IN THE EVENT OF RANGE TOP
GREASE FIRE, OBSERVE THE FOLLOWING:
SUMMERSET GRILLS HOODS ARE FOR
RESIDENTIAL USE ONLY!
NOTE TO INSTALLER:
HANDLING PRECAUTIONS
4. DO NOT USE WATER, including wet
dishcloths or towels - a violent steam
explosion may result.
• Use an extinguisher only if:
• You know you have a class ABC extinguisher
and you already know how to operate it.
• The fire is small and contained in the area
where it started.
• The fire department is being called.
• You can fight the fire with your back to an
exit.

4
CLEANING AND MAINTENANCE
Your hood will not function properly if not
cleaned
Regularly and maintained properly. Clean
the filters regularly (at least twice a month
or every 24 hours of use) by soaking them
in soapy water and rinsing them in the
dishwasher at the normal cycle. When the
filters are removed, the accessible interior
of the canopy can be cleaned of grease,
again using only soap and water. Burned
out halogen light bulbs are exchanged in
the same way as normal light bulbs. They
should not be touched with bare hands due
to high heat and hand oils that can burn out
the bulb. Make sure to replace them with
the same type and waage. (Replacement
Halogen bulbs are Par16 60w 115v)
Make it a habit to turn on the hood on low
speed even when you are only boiling water.
The cleaning of the outside of the hood
depends on the material used as a decorative
exterior. For stainless steel and powder
coated metals, clean with soap and water
only. Do not use abrasive or
Aggressive chemicals! Check the outside end
of the duct at least once a year. Make sure
that the back-dra damper (sold separately)
hinges are free of grease and move easily.
If you have an insect screen installed in the
duct termination, make sure that it is not
broken or dislocated. Filters are dishwasher
safe or you may hand wash them with warm
soapy water.
Select the proper height to mount the hood.
Take into consideration the stature of the person
or persons who will be cooking. A height of 30"
to 36" above the cooking surface will suit most
users. If mounted at a height greater than 36"
above the cooking surface, the hood should
be at least 6" wider than the cooking appliance
to provide a proper capture of heat and grease.
(Refer to the range manufacturer's guidelines)
Once the proper height is established, draw a
level line where the boom of the hood will rest.
If practical, mount a board equal to the width of
the hood along the line so you may rest the hood
On it while installing. Mark a centerline on the
wall equal to the entire height of the hood to
assist with the proper duct alignment and hood
placement. Determine stud location and mark
it clearly. If only one stud can be located, toggle
bolts or additional fastening must be installed to
firmly secure the hood to the wall. Install a 115v
15amp electrical lead in the hole marked on the
Rough -in diagram. (Fig. A) The hole is located
on the centerline of the hood. The center of the
hole is 3” up from the boom of the hood and the
radius is 7/8”.
INSPECT ALL MOLDED PACKAGING AND
BOXES FOR PARTS BEFORE DISCARDING.
ANY DAMAGE MUST BE REPORTED BEFORE
INSTALLING THE HOOD. ONCE THE HOOD
HAS BEEN INSTALLED, NO RETURN WILL BE
ACCEPTED.
PLANNING THE LOCATION FOR YOUR
SUMMERSET ® PROFESSIONAL GRILL HOOD

5
*A LICENSED ELECTRICIAN SHOULD MAKE ALL ELECTRICAL CONNECTIONS*
WIRING DIAGRAM
INSTALLATION
Connect wires from 115V supply using wire nuts (not supplied). Connect ground lead to supplied
ground screw inside the electrical box. Secure cover onto electrical box. Test for proper function.
INSTALLATION OF INTERNAL BLOWER KIT
(SSVHBL-1200).
INSTALLATION OF IN-LINE OR REMOTE
BLOWER
Locate connector on motor wiring and
connector on hood located near the electrical
box. Plug motor connector into
hood connector
Using the harness supplied with your
Summerset ® Professional Grill in-line
or remote blower, plug into connector
located near canopy electrical box. Make all
connections between supplied harness and
wiring connected to the blower using wire
nuts (not included) inside of canopy electrical
box.
MOLEX
MOTOR 1
RED
BROWN
1
2
3
1
2
3
4
5
6
4
5
6
RED
BROWN
WHITE
BLACK
GREEN
RED
BLACK
GREEN
GROUND
LIGHT SWICH
MOTOR SWICH
MOLEX
MOTOR 2
LIGHT'S
A
B
B
A
1
2 3 4
1
2
3
4
DO NOT SCALE DRAWING
SHEET 1 OF 1
UNLESS OTHERWISE SPECIFIED:
WEIGHT:
TITLE:
FINISH
MATERIAL + THICKNESS
INTERPRET GEOMETRIC
TOLERANCING PER:
DIMENSIONS ARE IN INCHES
TOLERANCES:
ANGULAR: MACH ± 0.1
TWO PLACE DECIMAL ± 0.010
THREE PLACE DECIMAL ± 0.005
THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF
AMD DIRECT, INC. ANY
REPRODUCTION IN PART OR AS A WHOLE
WITHOUT THE WRITTEN PERMISSION OF
AMG DIRECT, INC. IS PROHIBITED.
PROPRIETARY AND CONFIDENTIAL
17322 Gothard St.
Huntington Beach,
CA 92647
DWG. NO.
VENT HOOD DIAGRAM
12/09/20
REVISION NOTE
APVD BY DATE
ECN
NO.
REV.
New release
AU
1005 A LL

6
SSVH-36
SSVH-48
DIMENSIONS

7
SSVH-60

8
WARRANTY
WHAT IS NOT COVERED?
FOR ANY QUESTIONS OR CONCERNS PLEASE CONTACT THE FOLLOWING:
Summerset will warranty all parts for the term of one (1) year. The one (1) year warranty period
applies to the actual parts.
Summerset Grills Warranty is valid for original purchaser at original site of delivery with proof
of purchase and photo documentation only. Registration form must be submied within
30 days of the purchase date to validate the warranty. Warranty is void upon transfer of
ownership. Warranty does not apply to products installed in any commercial, rental, on non-
residential application. Warranty covers replacement parts only. Manufacturer is not responsible
for labor or labor related costs. Warranty does not cover discoloration, surface rust, corrosion,
or oxidation which may occur due to harsh environments, chemicals, or overheating. Warranty
will not apply for damage resulting from improper installations, abuse, extreme environments,
grease fires, or misuse. Regular and proper maintenance is required. Coastal, humid, and/or salt
environments are subject to manufacturer review. All out-of-box claims must be made within 30
days of purchase and must be made prior to installation. Any product installed damaged will be
considered damaged during installation and dot covered under warranty.
Warranty and registration forms are available at www.summersetgrills.com.
Items not covered in the warranty include: halogen bulb, items fabricated to customer design,
consequential damage, removal and re-installation, abnormal travel outside the service area,
including but not limited to: remote area transport, ferries or excessive mileage. If any of these
situations apply, the customer will be responsible for payment in full and said exclusion
Summerset Grills
17322 Gothard St.
Huntington Beach Ca.
www.summersetgrills.com
1.800.966.8126

Summersetgrills.com 17322 Gothard St., Huntington Beach, CA. 92647 800.966.8126
PN: 90153
REV: B
12/20
WE MAKE IT ALL
Summerset offers a wide variety of luxury stainless steel
refrigerators, wine coolers, and kegerators. With up to 6.6 cubic
feet of storage, these appliances will help keep your food fresh,
wine chilled, and beer flowing, bringing the function of your
indoor refrigeration outside to join the party.
SINKS & BAR PREP
Take your outdoor kitchen to the next level with our sinks
and ice chests. The Summerset Beverage Center is complete
with an ice compartment, sink, towel holder, speed rail with
condiment tray, LED lights, and a built-in bole opener. When
you’re grilling, we want to make sure you have everything you
need conveniently on hand.
Summerset Professional Grills strives to meet every outdoor living expression. We offer a wide
range of products from grills, refrigeration, sinks, accessories and more. Our goal is to ensure
you have everything you need to create your perfect outdoor atmosphere. No maer the style or
budget, Summerset will deliver an experience that will help create the ultimate backyard getaway.
ACCESSORIES
Summerset’s full line of stainless steal outdoor kitchen
components makes sure you have everything you need for the
perfect outdoor kitchen experience. Double-lined construction
provides the extra insulation and resilience needed against
the elements, so closing drawers offer a luxurious feel, and a
thicker flange provides a sturdy, seamless fit and elegant style
that will work with any countertop and island finish.
REFRIGERATION