Sun-Tech Oscar 2 User manual

Bird’s Eye View Toolbar Icons
Start/Stop
To Power On:
Press the Start/Stop button.
To Power Off:
When the monitor is not taking
a reading, press and hold the Start/
Stop button until you hear 5
quick beeps (approx. 5 seconds),
then release.
To Abort a Measurement:
When the monitor is taking a
reading press the Start/Stop button.
To Start a Programmed ABP Study:
When the time is flashing, press
the Start/Stop button.
To Start a Single BP Reading:
When the time is displayed, press
the Start/Stop button.
Buttons
reserved for future
programmability
Time
When the monitor is not taking a reading,
indicates the correct time.
BP Reading
During a BP reading, indicates the pressure of the
cuff in mmHg.
Immediately after a BP reading, the display
shows the results of the reading, blood pressure
in mmHg followed by heart rate in beats per
minute.
Clock
Denotes that a programmed ABP study
is in progress.
Battery
Indicates low battery voltage;
BATTERIES NEED TO BE REPLACED.
Printer
Indicates the number of BP readings in memory.
Sun
Denotes that the monitor is collecting
readings at selected intervals for the AWAKE
portion of the study.
Moon
Denotes that the monitor is collecting readings
at selected intervals for the ASLEEP portion
of the study.
Systolic/Diastolic
Program
Program the monitor for an ABP study.
Print
Print a report.
Retrieve
Retrieve an ABP study from the monitor.
Print Page
Print the report page of the displayed data.
BP Data
Open an ABP study.
Create PDF
Create a PDF file of a report.
Print Preview
Preview a report.
Help
Browse help files.
Exit
Close AccuWin Pro™v3.
Quickstart Guide
Menu bar
Tabs Status Bar
Toolbar
SunTech Medical, Ltd.
Level 19, Two IFC
8, Finance Street, Central
Hong Kong
Tel: + 852.2251.1949
Fax: + 852.2251.1950
www.CN.SunTechMed.com
SunTech Medical, Ltd.
2/F of Building A, Jinxiongda Technology Park
Guanlan, Bao’an District Shenzhen, 518110, PRC
Tel: + 86-755-2958 8810
+ 86-755-29588986 (Sales)
+ 86-755-29588665 (Service)
Fax: + 86-755-2958 8829
www.CN.SunTechMed.com
SunTech Medical, Inc.
507 Airport Boulevard, Suite 117
Morrisville, NC 27560-8200 USA
Tel: + 1.919.654.2300
1.800.421.8626
Fax: + 1.919.654.2301
www.SunTechMed.com
SunTech Medical, Ltd.
Oakfield Estate
Eynsham, Oxfordshire
England
Tel: + 44 (0) 1865.884.234
Fax: + 44 (0) 1865.884.235
www.SunTechMed.com
part #82-0026-00 Rev. E

Install Software 1
Start your computer and install AccuWin Pro v3 using the
installation CD. If the CD does not automatically start,
use Windows Explorer to find and run
“Autorun.exe” on the CD.
Setup Your Monitor 2
Install 2 AA batteries in the back of the Oscar 2 monitor.
Using the PC USB cable, connect the monitor to the
computer.
Communicate With Your Monitor 3
Start AccuWin Pro v3. From the menu bar, select Monitor then
Configure Port. When the Oscar 2 is connected to the PC with
the USB cable, the USB port is automatically selected.
Program Your Monitor 4
Select the Program icon and fill out the parameters for
a new ABP study. You can enter the patient’s name and
ID here or it can be added later when data is retrieved
from the monitor.
Prepare your patient for the study 6
With the monitor on, press the Start/Stop button( )
on the monitor to manually begin a BP reading. Verify
the monitor is working correctly. Prepare your patient for
the operation of the monitor by reviewing the Preparing
& Educating the Patient section of the Oscar 2 User’s
Guide.
Note! Make sure the patient knows to minimize movement and
to let their arm rest slightly away
from their body so the monitor
can take a successful reading.
Your patient is now ready for the
ABP study.
Retrieve ABP data from the Oscar 2 7
When your patient returns from the ABP study, remove
the monitor and accessories and connect the Oscar 2 to
the computer (See step 2). Start AccuWin Pro v3 & select
the Retrieve icon. After data retrieval, follow the on-
screen instructions to save the study. The data from the
study is now displayed.
Review ABP study & print report 8
Edit study data with the ABP data, Patient Info and Phy-
sician Info tabs. Review the study using Statistics, Time-
Slice Statistics and Hourly Averages tabs. Finally, select
the Print Preview icon to configure and print the report or
select the PDF icon to create a PDF file of the report.
First Time Setup & Operation
Fit your patient with the monitor & Orbit™Cuff 5
Choose the proper cuff size by using the RANGE
indicator and INDEX marker to check for correct arm
circumference. Apply the Orbit cuff by sliding the sleeve
up the patient’s arm with the hose exiting the top of the
cuff. Be sure the ARTERY indicator is over the brachial
artery and wrap the cuff snugly. Connect the hose of the
cuff to the monitor, place the monitor in
the pouch and affix to the
patient with the belt.