Suncoast B1p User manual

CUSTOM AMPLIFICATION
B1p BASS PREAMP
OWNERS MANUAL
REV B
Copyright 2014, Sluggo Music Technology LLC
All Rights Reserved.

Sluggo Music Limited Warranty
Sluggo Music Technology LLC warrants this product to be free of defects in material and
workmanship for the period of one year from the date of original purchase. This
warranty is only applicable to the original retail purchaser. To be protected by this
warranty, the purchaser must complete the online warranty form within 14 days of the
date of purchase. During the warranty period Sluggo Music shall, at its sole discretion,
either repair or replace, free of charge, any product that it deems to be defective upon
inspection by Sluggo Music Technology LLC or its authorized service representative.
To obtain warranty service, the purchaser must first obtain a Return Authorization
Number from our service department and shipping address where to return the unit for
service. All authorized returns must be sent to our service department postage prepaid,
insured for full replacement value, properly packaged and accompanied with a
description of the problem. Sluggo Music reserves the right to update any unit returned
for repair and the right to change or improve the design of the product at any time
without prior notice. This warranty does not cover claims for damage due to abuse,
neglect, alteration or attempted repair by unauthorized personnel, and is limited to
failures arising during normal use that are due to defects in material or workmanship in
the product only. Any warranties, including implied warranties of merchantability and
fitness for a particular purpose, are limited in duration to the length of this original
warranty. In no event will Sluggo Music Technology LLC be liable for incidental or
consequential damages resulting from the breach of any express or implied warranty
including damage to property, damage based on inconvenience or loss of use of the
product, and personal injury to the extent permitted by law. This warranty gives you
specific legal rights, which may vary from state to state. This warranty applies only to
products sold in the United States of America. For warranty information in all other
countries please refer to your local distributor.
Sluggo Music Technology LLC
P.O. Box 913
Dunedin, FL 34697-0913
[phone]
[email protected]
[email protected]m
“SUNCOAST” is a trademark of
Sluggo Music Technology LLC, Copyright 2014
All Rights Reserved

1Overview
1.1 Introduction
1.2 Features
2Controls
2.1 Front Panel Layout
2.2 Preamp Controls
2.3 Rear Panel Layout
2.4 Rear Panel Jack Description
2.5 Internal Boost Preamp Controls
2.6 Input Gain / Ch2 Boost Dip Switch
3Operation
3.1 Operating Instructions
3.2 External Effects Patching
3.3 Preamp tone settings
4Technical
4.1 Specifications

1.1 Introduction
Thank you for purchasing the SUNCOAST - B1p Bass Preamp. It is our
commitment to providing our customers with the highest quality, musical
instrument preamp/processors, designed and built in the USA. Utilizing our
vast experience with classic designs over the past 30 years, we set out to
recreate that unique sound from some of our personal favorite artists.
1.2 Features
The following is a summary of your B1p Bass Preamp’s unique features:
•The Ultimate Solid-State Bass Preamp in a pedal. Also works great with
Bass Synthesizers and Baritone Guitar.
•The Boost Mode preamp features “Super Boost”™ triple Overdrive and
separate EQ for Monstrous, Harmonic Heavy, Bass solo's.
•Internal trimpots for Boost preamp Drive, Bass, Midrange and Treble.
•Internal dip switch for selecting OD1(Normal) or OD2(Super Boost).
•Buffered effects loop Send and Return jacks allows for patching external
FX between the preamp out and limiter input. True bypass footswitch.
•Active +/-15dB Bass, Midrange and Treble EQ with sweepable Midrange
Frequency control.
•Limiter footswitch with variable Threshold control to tame your funk'n
thumb.
•100% discreet analog circuit design utilizing precision surface mount
technology.
•Ultra quiet 1.2MHz switching DC power supply for +/-15V internal
operation, 30V peak to peak Dynamic Headroom.
•Solid, Diecast Aluminum Enclosure, Durable Black Satin Powder
Coating - Dimensions 4.7 x 7.4 x 1.3"
•Standard 9V DC, 300mA Adapter

2.1 Front Panel Layout
2.2 Preamp Controls
Limiter - This control adjusts the limiter threshold for when it kicks in.
Volume - The Volume control adjusts the output level of the preamp.
Bass - This tone control adjusts the amount of low frequencies.
Freq - This control adjusts the midrange center frequency.
Middle - This tone control adjusts the amount of midrange frequencies.
Treble - This tone control adjusts the amount of high frequencies.
Drive - The Drive control adjusts the input level of the preamp.
Limiter Footswitch – Turns the Limiter On/Off.
Boost Footswitch – Engages the Overdrive Preamp.
Bypass Footswitch – Turns the Preamp On/Off.

2.3 Rear Panel Layout
2.4 Rear Panel Jack Description
Power Input - Power input jack, 9VDC @ 250mA (Center–Negative).
Input - Main instrument input jack.
Output - Main preamp output jack.
Boost Vol - Boost Volume for blending Overdrive preamp with clean tone.
Send - Effects Loop Send jack, (preamp out).
Return - Effects Loop Return jack, (limiter in).
2.5 Internal Boost Preamp Controls
Boost Preamp – Drive, Bass, Midrange and Treble internal trimpots to
customize your Overdrive level and tone. The dip switch is used to select
OD1 (Normal) Boost or OD2 (Super Boost) Overdrive. Note: Only one OD
switch can be selected at a time or the overdrive circuitry will oscillate.

2.6 Input Gain / Ch2 Boost Dip Switch
The Input Gain dip switch adds +10dB of gain to the first stage input buffer.
This adds more drive to both channels. The Ch2 Boost switch adds a +20dB
Mid/Treble boost to the clean channel for more tube like growl.
3.1 Operating Instructions
•Always connect your instrument input and preamp output prior to turning
the unit or pedal board ON.
•Use only quality coaxial instrument cable (guitar cord) patching your
preamp to your amplifier.
•Always connect the unit a proper power source and use a grounded outlet
strip, otherwise a shock hazard may result, especially when the unit is
connected to other equipment. Domestic 9VDC power adapters should be
connected to 115VAC, 60 Hz. Connection to improper line voltage may
cause permanent damage.
•Do not expose this unit to rain or excessive moisture. This may cause a
shock hazard or damage to the unit.
SAFETY NOTICE: There are no user serviceable parts inside the unit.
Refer servicing to qualified personnel only.
3.2 External Effects Patching
Bass Guitar > Envelope Filter > Flange > Chorus > B1p Input
B1p Send > Vol Pedal > Digital Delay > Noise Gate > B1p Return
B1p Output > Power Amplifier > Speaker

3.3 Preamp Tone Settings
These settings are merely a suggested starting point from which you can set
to your own personal taste.
Limiter - 5
Volume – 7 (adjust for desired loudness)
Bass – 7
Freq - 4
Middle – 4
Treble – 3
Drive – 5
4.1 Specifications
Input Voltage – 9VDC
Current Consumption – 250mA
Input Impedance – 1Meg Ohm
Output Impedance – 600 Ohms
Dimensions – 7.4”W x 4.7”H x 1.3”D
Weight – 1.1lbs
Sluggo Music Technology LLC, Copyright 2014
All Rights Reserved