Sunell SN-TPC6406KT-F User manual

Thermal Imaging Integrated Network Camera
User Manual
Issue
V1.0
Date
2022-09-07

Thermal Imaging Integrated Network Camera
User Manual
Precautions
Issue V1.0（2022-09-07）i
Precautions
Precautions
Fully understand this document before using this device, and strictly observe the rules
in this document when using this device. If you install this device in public places, put
a sign "You have entered the area of electronic surveillance" in an eye-catching place.
Failure to correctly use electrical products may cause fire and severe injuries. To
prevent accidents, carefully read the following context:
Symbols
This document may contain the following symbols whose meanings are described
accordingly.
Symbol
Description
It alerts you to fatal dangers which, if not avoided, may
cause deaths or severe injuries.
It alerts you to moderate dangers which, if not avoided,
may cause minor or moderate injuries.
It alerts you to risks. Neglect of these risks may cause
device damage, data loss, device performance
deterioration, or unpredictable results.
It provides a tip that may help you resolve problems or
save time.
It provides additional information.
To prevent electric shocks or other dangers, keep power plugs dry and clean.
⚫Strictly observe installation requirements when installing the device. The
manufacturer shall not be responsible for device damage caused by users' '
operation of non-conformance.

Precautions
Thermal Imaging Integrated Network Camera
User Manual
Issue V1.0（2022-09-07）
⚫Strictly conform to local electrical safety standards and use power adapters which
are marked with the LPS standard when installing and using this device. Otherwise,
this device may be damaged.
⚫Use accessories delivered with this device. The voltage must meet input voltage
requirements for this device.
⚫If this device is installed in places with unsteady voltage, ground the device to
discharge high energy such as electrical surges in order to prevent the power supply
from burning out.
⚫When this device is in use, ensure that no water or any liquid flows into the device.
If water or liquid unexpectedly flows into the device, immediately power off the
device and disconnect all cables (such as power cables and network cables) from
this device.
⚫Do not place the thermal imaging camera and unpackaged products at a radiation
source with a high intensity regardless of whether the device is in the normal
power-on state, for example, the sun, laser, and electric arc welder. Do not place the
thermal imaging camera and unpackaged products against objects with a high heat
source, for example, the sun. Otherwise, the accuracy of the thermal imaging
camera will be affected. In addition, the detector in the thermal imaging camera
may be permanently damaged.
⚫If this device is installed in places where thunder and lightning frequently occur,
ground the device nearby to discharge high energy such as thunder strikes in order
to prevent device damage.
⚫Unless otherwise specified in the user manual, do not use the thermal imaging
camera in an environment with the temperature lower than -40C (-40 F) or higher
than 60C (+140 F). Otherwise, the images displayed by the thermal imaging
camera are abnormal and the device may be damaged because of working beyond
the temperature range for a long period.
⚫As for the outdoor installation, avoid the morning or evening sunlight incidence to
the lens of the thermal imaging camera. The sun shade must be installed and
adjusted according to the angle of the sunlight illumination.
⚫During transportation and storage, avoid damage to products caused by heavy
pressure, severe vibration and soaking. The warranty does not cover any device
damage that is caused during secondary packaging and transportation after the
original packaging is taken apart.
⚫This device is sensitive to static. Improper static may damage the thermal imaging
camera. ESD protection measures and reliable grounding must be well prepared for
device installation and uninstallation.
⚫Protect this device from fall-down and intensive strikes, keep the device away from
magnetic field interference, and do not install the device in places with shaking
surfaces or under shocks.

Thermal Imaging Integrated Network Camera
User Manual
Precautions
Issue V1.0（2022-09-07）iii
⚫Clean the device body with a soft and dry cloth. In case that the dirt is hard to
remove, use a dry cloth dipped in a small amount of mild detergent and gently wipe
the device, and then dry it again. Pay special attention to the front window of the
thermal imaging camera because this is precision optics. If the front window has
water spots, use a clean and soft cloth moistened with water and wipe it. If the front
window needs further cleaning, use a soft cloth dampened with isopropyl alcohol
or detergent. Improper cleaning can cause damage to the device.
⚫The lens window of the thermal imaging camera is designed to be applicable to an
outdoor environment. The window is coated with durable coating material, but may
require frequent cleaning. When you found lens image degradation or excessive
accumulation of pollutants, you should clear up the window in a timely manner.
Exercise caution when you use this device in severe sandstorm (such as deserts) or
corrosive environments (such as offshore). Improper use may cause surface coating
off.
⚫Do not jam the ventilation opening. Follow the installation instructions provided in
this document when installing the device.
⚫Keep the device away from heat sources such as radiators, electric heaters, or other
heat equipment.
⚫Keep the device away from moist, dusty, extremely hot or cold places, or places
with strong electric radiation.
⚫If the device is installed outdoors, take insect- and moisture-proof measures to
avoid circuit board corrosion that can affect monitoring.
⚫Remove the power plug if the device is idle for a long time.
⚫Before unpacking, check whether the fragile sticker is damaged. If the fragile
sticker is damaged, contact customer services or sales personnel. The manufacturer
shall not be held responsible for any artificial damage of the fragile sticker.
Special Announcement
All complete products sold by the manufacturer are delivered along with nameplates,
operation instructions, and accessories after strict inspection. We shall not be
responsible for counterfeit products.
The manual may contain inaccurate information of function and operation, misprints.
The manufacturer will update this manual according to product function enhancement
or changes and regularly update the software and hardware described in this manual.
Updated information will be added to new versions of this manual without prior notice.
Pictures for reference only, subject to our available products.

Contents
Thermal Imaging Integrated Network Camera
User Manual
Issue V1.0（2022-09-07）
Contents
Precautions ..................................................................................................................................... i
Contents........................................................................................................................................ iv
1 Product Overview....................................................................................................................... 1
Thermal Imaging Principles and Advantages .................................................................. 1
Device Structure .............................................................................................................. 1
Out Wire Connection ....................................................................................................... 3
1.3.1 The Multi-connector Cables.................................................................................. 3
1.3.2 Integrated Cable Management Bracket................................................................. 5
Packing List..................................................................................................................... 6
Device Dimensions.......................................................................................................... 7
Installation ..................................................................................................................... 12
1.6.1 Preparations ........................................................................................................ 12
1.6.2 Installation Mode ................................................................................................ 12
1.6.2.1 Installing Bracket Without Junction Box ................................................. 13
1.6.2.2 Installing Bracket With Junction Box ...................................................... 15
2 Quick Configuration................................................................................................................. 18
Login and Logout .......................................................................................................... 18
Browsing Video ............................................................................................................. 19
2.2.1 Install Plugins ..................................................................................................... 21
Main Page Layout.......................................................................................................... 22
People Counting ............................................................................................................ 24
Changing the Password.................................................................................................. 25
Setting Local Network Parameters ................................................................................ 26
3 Thermal Settings....................................................................................................................... 30
Temperature Parameters ................................................................................................ 30
Ambient Temperature .................................................................................................... 35
Temperature Alarm ........................................................................................................ 35
Privacy Zone Masking................................................................................................... 40
Schedule Linkage .......................................................................................................... 41
Defect Pixel Correction ................................................................................................. 49
4 Image Settings .......................................................................................................................... 51
Image Settings Interface ................................................................................................ 51

Thermal Imaging Integrated Network Camera
User Manual
Contents
Issue V1.0（2022-09-07）v
Mode.............................................................................................................................. 52
Images ........................................................................................................................... 53
Scene ............................................................................................................................. 54
Set Pseudocolor ............................................................................................................. 56
FFC Control................................................................................................................... 57
Noise Reduction ............................................................................................................ 59
5 AI Multiobject .......................................................................................................................... 61
Parameters of AI Multiobject......................................................................................... 61
6 Intelligent Analysis................................................................................................................... 63
Intrusion......................................................................................................................... 63
Single Line Crossing ..................................................................................................... 66
Double Line Crossing.................................................................................................... 69
Multi-Loitering.............................................................................................................. 72
Wrong-way .................................................................................................................... 75
People Counting ............................................................................................................ 78
Enter Area...................................................................................................................... 81
Leave Area..................................................................................................................... 84
7 Advanced Intelligent Analysis .................................................................................................. 88
Smoker Detection .......................................................................................................... 88
Fire Spot Detection........................................................................................................ 91
A Troubleshooting ....................................................................................................................... 96
B Common Emission Rate .......................................................................................................... 98

Thermal Imaging Integrated Network Camera
User Manual
Product Overview
Issue V1.0（2022-09-07）1
1 Product Overview
Thermal Imaging Principles and Advantages
For any object, as long as its temperature is above the absolute zero (-273.15°C),
although the object does not give out light, it can radiate infrared. The infrared is also
known as thermal radiation. A temperature change occurs when the infrared radiated by
objects at different temperatures is absorbed by the infrared thermal detector, and
thereby generating an electrical effect. An electrical signal is amplified and processed
to obtain a thermal image corresponding to the distribution of heat on the surface of the
object, that is, infrared thermal imaging.
⚫Applicable to any light environment
Traditional cameras rely on the natural or ambient light for imaging. However, the
infrared thermal imaging camera can clearly image the object with the infrared heat
radiation of the object without relying on any light. The infrared thermal camera is
applicable to any light environment and is free from glare impact. It can clearly
detect and find the target as well as identify the camouflaged and hidden target in
both day and night. Therefore, it achieves real 24-hour surveillance.
⚫Monitoring the temperature field of the target heat distribution
The infrared thermal camera can display the temperature field of the object and
change the surface temperature distribution of the object that cannot be directly
seen by human eyes to the thermal image representing the surface temperature
distribution of the object. By monitoring the temperature field, you can
immediately identify the temperature abnormality, thereby preventing potential
risks caused by the temperature, such as fire.
⚫Providing the cloud penetration capability
Atmosphere, dust, and clouds can absorb visible light and near-infrared, but are
clear to the thermal infrared for 3 to 5 microns (medium wave infrared region) and
8 to 14 microns (long wave infrared). Therefore, it is difficult for the conventional
cameras to capture clear images under dense clouds, while the thermal imaging
camera is able to effectively penetrate the atmosphere and clouds to capture clear
images.
Device Structure
Figure 1-1 shows the rear panel of the thermal imaging integrated network camera. For
details of the interfaces, see Table 1-1.

Product Overview
Thermal Imaging Integrated Network Camera
User Manual
2 Issue V1.0（2022-09-07）
Appearance and Interfaces of the Camera
Interfaces of Device
No.
Physical Interface
Connection
1
Reset button
(RESET)
The configuration resumes to the factory settings
after you press the reset button for 5s. The default
value is 192.168.0.121.
2
Network indicator
(Yellow)
Connect to network, the yellow light flashes.
3
Power indicator (Red)
The power supply is plugged in and works
normally, the light is on.
4
SD card slot
It places the SD card.
Note:
When you install the SD card, ensure that the SD
card is not in the write-protection state and then
insert the SD card in the SD card slot.
When you remove the SD card, ensure that the SD
card is not in the write-protection state. Otherwise,
the data may be lost or the SD card may be
damaged.
When hot plugging the SD card, stop recording
and then perform the corresponding operation.

Thermal Imaging Integrated Network Camera
User Manual
Product Overview
Issue V1.0（2022-09-07）3
Out Wire Connection
There are two ways to connect the thermal imaging integrated network camera, the
multi-connector cables and the integrated cable management bracket. Users can choose
the corresponding method and installation method according to their bracket.
1.3.1 The Multi-connector Cables
Figure 1-2 the multi-connector cable of the thermal imaging integrated network
camera. For details of the multi-connector combination cable, please refer to Table 1-2.
Multi-connector Combination Cable
Multi-connector Combination Cables
ID
Core of Cable
Functions
Connection
1
--
Audio output
Connect to the external audio
device such as the voice box.
2
--
Audio input port (cable
input)
Input the audio signal and
receives the analog audio
signals from the sound pick-up
device.
3
--
CVBS
Analog video output.
4
--
DC12V /AC 24V
Power interface, connect to the
12 V DC (AC 24V) power
supply.

Product Overview
Thermal Imaging Integrated Network Camera
User Manual
4 Issue V1.0（2022-09-07）
ID
Core of Cable
Functions
Connection
5
Network interface
Connect to the standard
Ethernet cable.
6
Orange
Alarm out com 2
Connect to the alarm devices.
Yellow
Alarm out 2
Grey
Alarm in com 2
Purple
Alarm in 2
Brown
Alarm out 1com
Blue
Alarm out 1
white
Alarm in 1 com
Green
Alarm in 1
Pink
RS485RS+
RS485 interface, connect to
devices with PTZ function.
Black / white
RS485RS-

Thermal Imaging Integrated Network Camera
User Manual
Product Overview
Issue V1.0（2022-09-07）5
1.3.2 Integrated Cable Management Bracket
Integrated Cable Management Bracket Port
Integrated Cable Management Bracket Port
Port Name
Description
Remark
COM OUT 1
Alarm out com 1
ALARM OUT1
Alarm out 1
COM IN 1
Alarm in 1 com
ALARM IN1
Alarm in 1
AUDIO IN
input port (cable input)
Applied for
audio devices.
AUDIO GND
Audio port GND
AUDIO OUT
Audio output
CVBS
Analog video output.

Product Overview
Thermal Imaging Integrated Network Camera
User Manual
6 Issue V1.0（2022-09-07）
CVBS GND
Analog video output ground port。
COM OUT2
Alarm out com 2
ALARM OUT2
Alarm out 2
COM IN2
Alarm OUT com 2
ALARM IN2
Alarm in 2
RS485+
RS485+
Applied for
connecting to
external PTZ
RS485-
RS485-
DC 12 V/AC24 V
DC 12 V +
Support AC
24V
DC GND/AC24 V
DC 12V -
LAN
Network port, connect to internet.
Support PoE supply.
Packing List
Unpack and check the appearance of product for no obvious damage, and confirm the
item list for Table 1-4 is consistent.
Packing List
Item
Quantity
Remark
Thermal camera
1
User manual
1
Installation location label
1
Network interface protect cover
1
Plastic anchor
3/4
Self-tapping screw
3/4
Allen Key
2
Two types
T15 wrench
1
Configured for B
bracket
Plug and sealing ring
2
Configured for B

Thermal Imaging Integrated Network Camera
User Manual
Product Overview
Issue V1.0（2022-09-07）7
bracket
Cable gland
1
Configured for B
bracket
Junction box and accessories
1
Configured for B
bracket
Device Dimensions
The different brackets of device are having different dimensions, please refer to actual
product.

Product Overview
Thermal Imaging Integrated Network Camera
User Manual
8 Issue V1.0（2022-09-07）
The A Bracket With Junction Box Dimensions (unit: mm)
Longer Sun-shaded
The A Bracket With Junction Box Dimensions (unit: mm)
Shorter Sun-shaded

Thermal Imaging Integrated Network Camera
User Manual
Product Overview
Issue V1.0（2022-09-07）9

Product Overview
Thermal Imaging Integrated Network Camera
User Manual
10 Issue V1.0（2022-09-07）
The B Bracket Dimensions (unit: mm)
Longer Sun-shaded
The B Bracket With Junction Box Dimensions (unit: mm)
Shorter Sun-shaded

Thermal Imaging Integrated Network Camera
User Manual
Product Overview
Issue V1.0（2022-09-07）11

Product Overview
Thermal Imaging Integrated Network Camera
User Manual
12 Issue V1.0（2022-09-07）
Installation
1.6.1 Preparations
Tools needed (Not included) and supplied parts are shown in Table 1-5.
Installation Tools
Tools
Appearance
Phillips screwdriver (Not included)
Claw hammer (Not included)
Hammer drill (Not included)
Spirit level (Not included)
T15 ring spanner (Included)
Self-tapping screw (Included)
Inflatable colloidal particle (Included)
1.6.2 Installation Mode
The thermal imaging integrated camera can be installed on the ceiling or the wall. You
can select the appropriate installation according to your requirements. If the camera
needs to be installed on the cement wall, you need to install the expansion screws (the
mounting holes of the screws must be consistent with that of the support), and then
install the support.