Sunsky S-TT-0120 User manual

Portable Liquid Crystal Display/TV
Instruction
Dear Customers:
Thanks for buying this product. To assure the best performance
and security, please carefully read and keep this manual before
operating or adjusting this product.

1
Contents
I. Safe Information about Use.........................................................2
II. Main Functions and Features.....................................................2
III. Instruction of Host....................................................................3
IV. Connection of Host...................................................................7
IV. Basic Operation.........................................................................7
VI. Overhaul for Fault and Points for Attention...........................12
VII. Technical Specification and Parameters................................12
VIII. List for Accessories..............................................................13

2
I. Safe Information about Use
1. The safe voltage for the power adapter of this machine
ranges from 100V to 240V. And destroy shall be caused or it
has no function if it is beyond this scope.
2. The player shall be not used in the especially cold, hot, dusty
or damp environment.
3. Do not cast or strike the player; otherwise, it shall result in
wearing on the player or destroy on other hardware.
4. Do not use chemical agent or cleaning agent to clean the
player, otherwise, it shall cause destroy on the player and
corrode the spray paint.
5. Please do not dissolve or reconstruct the player. This
machine is with high voltage. If there is any problem, please
entrust the professional staff for the maintenance.
II. Main Functions and Features
1. Input of audio frequency and video frequency as display and
monitor
2. Analog TV
3. USB SD/MMC Card reader (This function can be optional)
4. Built-in stereo loudspeaker
5. Full-functional infrared control, 7 buttons for the host
(MENU, CH-, CH+, VOL-, VOL+, IR for TV/AT, POWER)
with simple and convenient operation
6. Multilanguage OSD
7. External direct current power (12V1.5A)

3
III. Instruction for Host
COLOR WIDE LCD DIGITAL MONITOR/TV
Ir
Menu
Ch-
Ch+
Vo l -
Vo l +
Function
Power

4
COLOR WIDE LCD DIGITAL MONITOR/TV
Ir
Menu
Ch-
Ch+
Vo l -
Vo l +
Function
Power

5
(1) Remote control for units with USB&Card-readiog function

6
(2) Remote control for units without USB&Card-readiog function
Instruction for Remote Controller
MODE MUTE VOL- RNTURN UP
STOP ENTER LEFT DOWN PAUSE/PLAY
NEME RAL CH+ POWER MENU VOL+
CH- BACK RIGHT FORW REPEAT
PREV NEXT

7
IV. Connection of Host
1. Alternating Current Adapter
Insert the direct current output terminal of the random incident
alternating current adapter into DC IN12V plug on the right of
the host and connect the other terminal on the socket with
alternating power of 100-240V.
2. Use of Earphone
Insert the random incident earphone into HP plug on the right
of the host. And please turn off the power when inserting or
drawing out the earphone.
3. Input of Audio and Video Frequency
Inset the random incident AV wire into AV-IN plug on the right
of the host, video signal into the yellow interface of AV line and
audio signal into the white and red interfaces respectively. And
please turn off the power when inserting or drawing out the
audio and video lines.
4. Compatible with USB & SD/MMC card reader (This
function can be optional)
Insert U disk, Mp3 or SD/MMC into the accordlg jack on the
left side of panel.
VI. Basic Operation
1. Input of Audio and Video Frequency
1. Insert the audio/video frequency line terminal into AV-IN
plug and connect the other terminal to the external machine
(source of signal).
2. Start this machine after power on and press the FUNCTION
on the panel to switch it into AV-IN status. Then AV

8
character shall appear at the upper right corner of the screen.
2. Television
The basic operations for receiving TV
1. Stretch out the telescopic antenna or insert the cable of the
wired television or the cable of outdoor antenna into the
signal plug.
2. Turn on the power of this machine and press FUNCTION on
the host or AV/TV key on the remote controller to switch the
machine into the TV receiving status.
3. If setup of functions is executed, please press MENU on the
host or the following menu called out from the remote
controller and MENU to conduct the setup of each function
combining these four keys VOL-, CH+, VOL+ and CH- (as
the direction keys at this moment)
5. Brightness, Contrast and Chromaticity: adjustable between
0-100
6. Normal: choose two normal and turn-over ways of the image
7. ZOOM 16:9: choose the scaling proportion, switching can
be made between 16:9 and 4:3