5.4 Anti-Theft:
It helps to against to vehicle theft when you park your vehicle outside your home at night or in
busy market place.
5.5 Point of interest:
It is specific point location that someone may find useful for his vehicle to frequent place visit.
For instance, Home, Office, Delivery location etc.
5.6 Playback:
It enables to review the vehicle past trip with ///./dates including running, stoppage, idling,
parking details with every location on map.
5.7 Geo-Fence:
It allows you too quickly and easily setup geographic boundaries around specific areas and
then receive automated alerts whenever a vehicle enters or exits those boundaries.
5.8 Power Disconnect Alert:
When the device will remove from the vehicle then immediately Power Disconnect Alert
activated.
5.9 Restart Device
If GPRS service is abnormal (OFFLINE), then user can send SMS command RESTART to
restart the device. Device will RESTART device after 20 secs after receiving the command.
5.10 Analog Signal:
The analog port is used to measure the any ADC Reading like Fuel, Temperature which will
be uploaded to platform/APP in fixed time of interval. Two analog signals are available to
take reading from sensors.
5.11 FOTA:
We can update firmware through a Simple command. Also other many commands are
available to update the Parameters like IP and PORT address, APN, Data Sending Frequency etc.
(Please See Command List).
5.12 Health Parameter:
Device Send Health String on request. After Sending command to get Health
Parameter using Mobile device send Health String which include following
parameters, Vender ID, Firmware Version No, IMEI Number, Battery Percentage,
Memory Percentage, Data Sending Frequency, Digital IP Status, ADC Values etc.
8 | Page
Sunyash Multi Trading Pvt. Ltd.
……………………………………………………………….
