
Setting Sensitivity
Switch Pair Position 1, 2, 3
20%
50%
75%
100%
Setting Time
Switch Pair Position 4, 5, 6, 7
10 seconds
1 minute
5 minute
10 minute
30 minute
Setting Light
Switch Pair Position 8, 9, 10
disabled
10 lx
50 lx
300 lx
Fixture-Mounted Motion Sensor
4400 Earth City Expy, St. Louis, MO 63045 866-590-3533 superbrightleds.com
Rev Date: V1 07/15/2021
Model BRI819P-B-O
Maximum Detection Radius 30 ft (9.14 m)
Maximum Mounting Height 40 ft (12.2 m)
Operating Temperature -40°–167° F (-40°–75° C)
Specications
Safety and Notes
• Product should be installed and serviced in accordance with applicable
national, state, and local building and electrical codes.
• To reduce the risk of electric shock, ensure that the main power
source and circuit breakers are switched o before performing
any installation or wiring procedures.
Sensitivity adjusts detection area.
Time adjusts the amount of time between when motion is detected and when the light enters standby mode.
Light adjusts the daylight threshold which allows the light to stay o if motion is detected and the room is already suciently illuminated.
Important: Read all instructions prior to installation. BRI819P-B-O
User Manual
DIP Switch Settings
1 2 3 4 5 6 7 8 9 10
UP
Check product label for specific electrical
specifications related to installation.
Improper installation will void warranty.