Supermicro X10DRi-T User manual

JPI2C1
JPWR1 JPWR2
JOH1
JL1
JSD1
JSTBY1
JTPM1
JPB1
JWD1
JVRM1
JI2C2
JPME2
JI2C1
SP1
JIPMB1
LE2
FAN4
FAN2 FAN3
FAN1
FANB
S-SATA2
MAC CODE
BAR CODE
S-SATA3
S-SATA0
S-SATA1
Fan5
T-SGPIO3
USB2/3
IPMI_LAN
UID
JBT1
T-SGPIO2
T-SGPIO1
I-SATA1
I-SATA0
I-SATA3
I-SATA5
I-SATA4
COM2
CPU1 SLOT1 PCI-E 3.0 X8
CPU1 SLOT2 PCI-E 3.0 X16
CPU1 SLOT3 PCI-E 3.0 X8
CPU2 SLOT4 PCI-E 3.0 X16
CPU2 SLOT5 PCI-E 3.0 X8
CPU2 SLOT6 PCI-E 3.0 X16
P1 DIMMC2 P1 DIMMC1
P2 DIMME1
P2 DIMME2
P1 DIMMD1 P1 DIMMD2
P2 DIMMF1
P2 DIMMF2
VGA
P1 DIMMB2
P2 DIMMH2
P1 DIMMA1
P1 DIMMA2
P2 DIMMG1
P2 DIMMH1
P2 DIMMG2
LAN2
COM1
LAN1
USB0/1
LE1 Fan6
LEDM1
BIOS
JD1
USB4/5
I-SATA2
FANA
JPG1 JPL1
JF1
P1 DIMMB1
FPCTRL
Battery
X10DRi-(T)
Rev. 1.02
Intel PCH
LAN CTRL
BMC
BMC FW
J24
VGA/BMC Memory
(2.0)
(USB2.0)(USB2.0)
CLOSE 1st
OPEN 1st
CLOSE 1st
OPEN 1st
USB6/7(3.0)
USB8/9
(3.0)
USB10 (3.0)
CPU2
CPU1
JUIDB1
JVRM2
J23
J25 J27
J26
J-USB3-1AA
JSD2
SUPERMICR R
CONTACT INFORMATION
MNL-1491-QRG-10a
• Website: www.supermicro.com
• General Information: [e-mail]
• Tech Support: [e-mail]
• Phone: [phone], Fax: [phone]
© 2016 Supermicro Computer Inc. All rights reserved.Reproduction of this document whether in part or in whole is strictly prohibited without
Supermicro's written consent. All trademarks are the property of their respective entities. All information provided is deemed accurate at the
time of printing; however, it is not guaranteed.
PACKAGE CONTENTS
X10DRI/X10DRI-T
QUICK REFERENCE GUIDE
• One (1) Supermicro Motherboard
• Six (6) SATA Cables (CBL-0044L)
• One (1) I/O Shield (MCP-260-00042-0N)
• One (1) Quick Reference Guide (MNL-1491-QRG)
FOR YOUR SYSTEMTO WORK PROPERLY, PLEASEDOWNLOA D APPROPRIATE
DRIVERS/IMAGES/USER'SMANUALFROM THELINKSBELOW :
• Manuals: http://www.supermicro.com/support/manuals/
• Drivers & Utilities: ftp://ftp.supermicro.com/
• Safety: http://
www.supermicro.com/about/policies/safety_information.cfm
LED Indicators
Jumper Description Default Setting
JBT1 Clear CMOS See Chapter 3
JI2C1/JI2C2 SMB to PCI-E Slots Pins 2-3 (Disabled)
JPB1 BMC Enable Pins 1-2 (Enabled)
JPG1 VGA Enable Pins 1-2 (Enabled)
JPL1 GLAN1/GLAN2 Enable (X10DRi)
(10G) TLAN1/TLAN2 Enable (X10DRi-T) Pins 1-2 (Enabled)
JPME2 Manufacture (ME) Mode Select Pins 1-2 (Normal)
JWD1 Watch Dog Timer Enable Pins 1-2 (Reset)
Jumpers
Motherboard Layout and Features
Connectors
Jumpers and Connectors
Back Panel I/O Connectors
Memory Support
CPU Installation
Note: Graphics shown in this quick reference guide are for illustration only. Your components may or may not look exactly the same as the drawings shown in this guide. Note: Refer to Chapter 1 of the user manual for detailed information on jumpers, connectors,
and LED indicators.
= mounting hole
Heatsink Installation Front Panel Control (JF1)
CPU Support
Dual Intel®E5-2600v3/v4 Series Processors (Socket R3-LGA 2011);
each processor supports dual full-width Intel QuickPath Interconnect (QPI) links
(of up to 9.6 GT/sone direction per QPI)
The X10DRi/X10DRi-T Motherboard supports up to 2048 GB of Load Reduced
(LRDIMM) or 512 GB of Registered (RDIMM) DDR4 (288-pin) ECC 2400 MHz (max.)
modules in 16 slots. Memory speed support depends upon the CPUs installed in the
motherboard. For the latest memory updates, please refer to our website at
http://www.supermicro.com/products/motherboard.
Connectors Description
Battery Onboard CMOS Battery (See Chpt. 3 for Used Battery Dis-
posal)
COM1/COM2 Backplane COM Port1/Front Accessible COM2 Header
Fan1-6, FanA-B CPU/System Fan Headers
J24 24-pin ATX Main Power Connector (See Warning on Pg. 1-6.)
JD1 Speaker/Power LED
JF1 Front Panel Control Header
JIPMB1 4-pin External BMC I2C Header (for an IPMI Card)
JL1 Chassis Intrusion
JOH1 Overheat LED Indicator
JPI2C1 Power Supply SMBbus I2C Header
JPWR1/2 12V 8-Pin Power Connectors (See Warning on Pg. 1-6.)
JSD1/JSD2 SATA DOM (Device on Module) Power Connectors
JSTBY1 Standby Power Connector
JTPM1 TPM (Trusted Platform Module)/Port 80 Header
JUIDB1
LAN1/LAN2 G-bit Ethernet (GLAN) Ports 1/2 (X10DRi)
10G-bit Ethernet (TLAN) Ports 1/2 (X10DRi-T)
(IPMI) LAN IPMI_Dedicated LAN support by the Aspeed controller
(I-)SATA 0-5 SATA 3.0 Connectors supported by Intel PCH (I-SATA 0-5),
(I-SATA4/I-SATA5: can be used as Supermicro SuperDOM
(Disk-on-Module) devices with built-in power connectors)
(S-)SATA 0-3 SATA 3.0 Connectors supported by Intel PCH (S-SATA 0-3)
(CPU1) Slot1 PCI-Express 3.0 x8 Slot from CPU1
(CPU1) Slot2 PCI-Express 3.0 x16 Slot from CPU1
(CPU1) Slot3 PCI-Express 3.0 x8 Slot from CPU1
(CPU2) Slot4 PCI-Express 3.0 x16 Slot from CPU2
(CPU2)Slot5 PCI-Express 3.0 x8 Slot from CPU2
(CPU1)Slot6 PCI-Express 3.0 x16 Slot from CPU2
(T-)SGPIO1/2/3 Seria_Link General Purpose I/O Headers 1/2/3 (for SATA
ports), (T-SGPIO1 for I-SATA0-3, T-SGPIO2 for I-SATA4/5, T-
SGPIO3 for S-SATA0-3)
SP1 Internal Speaker/Buzzer
(BP) USB 0/1 Backpanel USB 2.0 Ports 0/1
(BP) USB 6/7 Backpanel USB 3.0 Ports 6/7
(FP) USB 2/3, 4/5 Front Accessible USB 2.0 Connection Headers 2/3 (J25), 4/5
(J27)
(FP) USB 10 Front Panel Accessible Type A 3.0 Connector USB10 (J26)
(FP) USB 8/9 Front Panel Accessible Vertical USB 3.0 Connector for USB
8/9 (J-USB3-1AA)
VGA Backpanel VGA Port
LEDDescription State Status
LE1 Rear UID LED Blue: On
LE2 Onboard PWR LED On System Power On
LEDM1 BMC Heartbeat LED Green: Blinking BMC Normal
1
2
3
4
5
6
7 8 9
Backplane I/O Panel
1. COM Port 1 6. Back Panel USB 3.0 Port 7
2. Back Panel USB 2.0 Port 0 7. Gigabit LAN 1 (X10DRi), (10G)
TLAN 1 (X10DRi-T)
3. Back Panel USB 2.0 Port 1 8. Gigabit LAN 2 (109DRi), (10G)
TLAN 2 (X10DRi-T)
4. IPMI_Dedicated LAN 9. Back Panel VGA
5. Back Panel USB 3.0 Port 6
Socket Keys
CPU Keys
Screw #1
Screw #2
Mounting Holes
Screw #3
Screw #4
Rev. 1.0a
Power Button
OH/Fan Fail/
PWR Fail LED)
1
NIC1 Link LED
Reset Button
2
Power Fail LED
HDD LED
FP PWRLED
Reset
PWR
3.3 V
UID Switch
UID LED
Ground
Ground
1920
3.3V
X
Ground NMI
X
NIC2 Link LED NIC2 Activity LED
NIC1 Activity LED
DIMM Memory Installation
1
Release Tabs
Notches
Populating RDIMM/LRDIMM DDR4
Memory Modules for the E5-2600v3-
based Motherboard
Populating RDIMM/LRDIMM DDR4
Memory Modules for the E5-2600v4-
based Motherboard
1 Slot P
er
Channel 2 Slots Per Channel
1DPC
1DPC
2DPC
1.2V
1.2V
1.2V
2133 2133 1866
2133 2133 1866
2133 2133 1866
2133 2133 1866
2133 2133 2133
†
2133 2133 2133
Type
R
anks Pe
r
DIMM an
d
Data
Width
DIMM Capacity
(GB)
Speed (MT/s); Voltage (V);
Slot Per Channel (SPC) and DIMM Per
Channel (DPC)
1 Slot Per
Channel 2 Slots Per Channel
1DPC 1DPC 2DPC
4Gb 8Gb 1.2V 1.2V 1.2V
RDIMM SRx4 8GB 16GB 2400 2400 2133
RDIMM SRx8 4GB 8GB 2400 2400 2133
RDIMM DRx8 8GB 16G B 2400 2400 2133
RDIMM DRx4 16GB 32GB 2400 2400 2133
LRDIMM QRx4 32GB 64GB 2400 2400 2400
LRDIMM
3DS8Rx4 64GB 128GB 2400 2400 2400